My new to me 318 has every dang fin broken on the fly wheel. Id love to hear the story how lol
@mmrbeef
21 күн бұрын
Woof! Probably someone trying to stop the engine or something got shoved down in there while it was running. If you are searching for a new flywheel remember the P series and the B series flywheels are different.
@MineRat45
3 жыл бұрын
putting a large crescent adjustable wrench on the puller itself to hold the flywheel stationary works well and does not endanger the fins.
@mmrbeef
3 жыл бұрын
This is a great suggestion.
@themetalman2729
3 жыл бұрын
I took mine off to check the ignition system and clean things up in the mean time I put the bolt back in to spin the motor over some. My main question is will this make the timing off?
@DieselRamcharger
3 жыл бұрын
not as long as the key is there.
@derekabendroth7153
3 жыл бұрын
I’m trying to remove my flywheel off my P218. I’m doing everything you are but it won’t come off. I’m using a 1/2” drive long handle ratchet. Any tips or tricks?
@derekabendroth7153
3 жыл бұрын
Figured it out myself. I took the bolt all the way out at first. Input the bolt back in all the way, backed it out two turns then put the puller back on. It popped right off after that.
@mmrbeef
3 жыл бұрын
Good deal! My first questions would have been to ask what type of puller and the depth of the flywheel bolt.
@speedbuggy7240
8 ай бұрын
Question: i have 2 onan motors. One is off my cub cadet 982. It's a b48g engine. I bought a newer onan NOS engine with electric ignition. The guy i bought it from said it should work on my cub. He changed the plate under the pto for a cub. This NOS engine I'm sure is originally for a johndeer. I got both motors on the floor next to each other and i noticed the flywheels are different. Will the smaller flywheel off my original cub b48g (with points) fit the NOS motor with electric ignition that has a bigger flywheel? Is the stater that's behind it the same size for both engines?
@MrRandyj72
2 жыл бұрын
Do you need a puller to get that stator off? Mines really on there and im afraid im gonna break it
@mmrbeef
2 жыл бұрын
Generally they come off by hand, but on occasion I've need to tap them lightly with a hammer to get them moving. I have not needed to use a puller to get a stator off.
@MrRandyj72
2 жыл бұрын
Thank you for that feedback. After a couple beers I wasn't so worried about saving it so just started tapping with hammer and prying with screw driver... It popped off. Its the timing cover thats giving me fits now. Think they used superglue or something to hold it on. Definitely don't want to damage it.
@codeman6998
4 жыл бұрын
So what the process for replacing ring gear?
@alozienwoko6670
4 жыл бұрын
What is mtf? You mention having posts there that talk about a grinding flywheel.
@mmrbeef
4 жыл бұрын
MTF is Mytractorfourm.com , great group of folks! Joining is free and there is a wealth of knowledge there.
@kringle02
6 жыл бұрын
Why didn't you hold the fly wheel and use your impact and bump it ,it would have took it right off
@kristinmeyer7716
4 жыл бұрын
intelligence is not natural for everyone
@DS-mm6fh
Жыл бұрын
No woulda broke the bolts . . Ask me how ik !!
@ericm5393
5 жыл бұрын
where did u get the socket holder thats in the tool box ? ,very organized , I have the same engine with a bad stator.
@mmrbeef
5 жыл бұрын
I think that holder came from Sears. Kobalt had similar ones for a while but I have not seen those recently.
@ericm5393
5 жыл бұрын
@@mmrbeef thx Bro
@Aa-ls4kd
4 жыл бұрын
Take the ring gear off and turn it around.
@tyo6896
5 ай бұрын
No lol
@tyo6896
5 ай бұрын
Oooooo
@svthuber758
4 жыл бұрын
What torque of the bolt for the flywheel?
@frankwilliams7673
6 жыл бұрын
Where did you buy that flywheel puller? I can't seem to find one like it.
@mmrbeef
6 жыл бұрын
It is a Snap-On puller. When I was doing these videos I was borrowing that one from a friend but I finally found my own back in October of 2017. Very nice pullers!
@kbitbit
7 жыл бұрын
Next time use the impact wrench on the puller for removal... Installation obviously requires a torque wrench
@DieselRamcharger
3 жыл бұрын
youre not supposed to use an impact on pullers. it destroys the threads.
@kbitbit
3 жыл бұрын
@@DieselRamcharger I've honestly never heard of anyone destroying their puller using an impact wrench....I couldn't count how many times I've done it and never had an issue...probably an old wives tale really.
@tbirdsteve1
7 жыл бұрын
That's a great looking puller you use. What brand is it and can you get them online?
@catandmousecreative
5 жыл бұрын
Hey there. As a 318 owner I am super appreciative of your videos. I’d like to replace my ignition module. I’m reading it’s behind the flywheel. Do you have a video that’s shows the location of the ignition module or the process of replacing one? Thank you!
@mmrbeef
5 жыл бұрын
I don't have a direct video for replacing only the ignition module but this video should help.... Feel free to ask questions if you have them. kzitem.info/news/bejne/2H6Y0omBfYB9ZHY
@buder5116
4 жыл бұрын
there too many variant of the damn engine
@mmrbeef
4 жыл бұрын
Yes, lots of small changes over the years.
@buder5116
4 жыл бұрын
@@mmrbeef i got question what is the torque of the timing valve gear cover? those 6 bolt i had to take it apart there was a leak in the gasket
@buder5116
4 жыл бұрын
@@mmrbeef if you are intersted i made my engine after rebuild run today check in my channel ps sorry if this feel like i am advertizing mine but i am not xD
@jardalandscapepaveuni1589
5 жыл бұрын
hi. I need a Onan P218 for mai new holland Ls 120. do you sell engine? where can I contact you?
@mmrbeef
5 жыл бұрын
Sorry I don't sell a lot of stuff like that. Try Boomer's Onan. Boomer always has NOS and rebuilt engines for sale. Great guy to learn from.
@vninex3621
4 жыл бұрын
Your channel is a " Must Subscribe To" for John Deere 318een enthusiasts. GREAT of You to these videos!!!~~~~~~~What is the best and easiest engine to replace a bad John Deere 318 Engine P218 ? Do You have a "How To" video on that? THANK YOU!!!
@mmrbeef
4 жыл бұрын
I have a video on removing and replacing an Onan engine but nothing yet on a new repower. There are several online places that sell whole kits for repowers. I did recently pick up a 318 with a 23 hp Briggs Vanguard (I uploaded that video a few minutes ago.)
@vninex3621
4 жыл бұрын
@@mmrbeef Bless You for the reply! I really luv my 318 for many reasons and been watching your videos with Great appreciation.
Пікірлер: 45