To me,this type of knowledge and expertise needs to be passed on.. It's just amazing what the human mind can learn..Great video. 👍💯👍💯
@endtimeawakening5557
Жыл бұрын
Great job on the teardown and diagnosis! Very well done young man! Great rebuild as well. Thanks for sharing this with us, it helps many out here doing the same thing. Take care, God bless!
@twostroke12v71
3 жыл бұрын
2nd year diesel tech student here. Graduating this June with my associates . starting an appreciation tomorrow at EMwest in Oregon!
@johnwarwick4105
2 жыл бұрын
Wow that was an interesting job. Parts bill alone must have been eye watering never mind labour 😮. Job well done
@timmayer8723
3 жыл бұрын
There are shops here in the US that specialize in tearing down GE Jet engines which are vastly more complicated than these tractors. The jet turbine parts are crazy expensive and the labor rate is through the roof. There are mechanics in every field who seem to have a knack for complicated mechanisms. RE Engineering seems to be one of these shops with one of these gifted mechanics.
@alvarodesouzarosajr
Жыл бұрын
We have a 4960 in our workshop, and the big difficulty are the parts because this tractor does not have many in Brazil. If you are available to give us some tips it would be fantastic as soon as the pieces are obtained. Great Job!!! Congratulations!!
@zhelyazkozhelyazkov4819
2 жыл бұрын
Hello, a few months ago I bought a JD4955 powershift transmission. Before I bought it, I tested it - everything was fine, except some little jumps when shifting gears. I have not driven too much - just about 80 hours - attaching a plough, testing the plough, working with a trailer and so. Afew days ago I started to prepare the tractor for new mulcher - to put defense from trees bellow the gears. Tractor worked fine. In the next morning, when I started the engine and switch to reverse, the tractor started driven ahead. I turned it off, restart the engine and again - put on reverse it was going front. At the same time the front gears - work fine. After I disconnect the rods and manually tried to switch to reverse (from the cover of transm valve). Tractor still going only forward. After a few more tries - I discovered that when switch to front (1-15) the tractor starts moving, but when push the brake, it stops (with engine still running). Then when I switch to contact, I hear the alarm and the arrow for front travel on the left of the screen is on. Then I decided that it coud be broken spring pin (holding forward/reverse valve), but no - I dismounted and the valve is OK. Could you please give an idea how to continue to diagnose the problem and what could be the most probable reason for this problem? farm.jnj@gmail.com
@stephenross1581
2 жыл бұрын
What a cracking job you made, your skills are second to none, 👌👌👌👌
@georgegozelski7330
3 жыл бұрын
Great video! Love the sound of that engine and those transmission shifts!
@paulroe7187
3 жыл бұрын
Best video ever, thanks for taking time to make it 👍
@burtbrooks7731
3 жыл бұрын
Man what a chore😳 splitting a tractor like that aint no joke👍👍 nice job 👊
@deanlimbacher6946
3 жыл бұрын
Great job man ,you really know what you’re doing!
@guillermopena6355
3 жыл бұрын
Great job you really know what you are doing, I got 4055fwd power shift and I have to do the same work
@mikeb8436
3 жыл бұрын
Very impressive. Well done
@trevormansfield6495
3 жыл бұрын
that is amassive job .Thanks for the video. Wish it was the whole job.
@etats-unis7638
2 жыл бұрын
I LOVE YOUR WORK 💪💪💪🇺🇸🇺🇸🇺🇸JOHN DEERE THE BEST
@andreasrotter2280
3 жыл бұрын
Nice work and you're right what a sound
@KRConnection
3 жыл бұрын
Great Work!
@vrsechs9581
3 жыл бұрын
Good music taste and good work!
@kamuzu
2 жыл бұрын
Superb job boss!
@JonDingle
3 жыл бұрын
Another interesting video squire!
@garydollard
2 жыл бұрын
Fair work well done I wouldn’t like to have to face that
@lucarocchi2904
3 жыл бұрын
exceptional work ... curiosity how many hours did the tractor have before the problem?
@ZAPATTUBE
3 жыл бұрын
How did you learn these things so well? I have trouble with my Ford 8N. LOL
@mwlind1790
3 жыл бұрын
Excellent job! I have one just like that, when can you start on it? Thanks for the video!
@jimstepan3038
Жыл бұрын
I didn't catch the part where you adjusted the output shaft preload..🤔 Loose bearings on the output shaft cause failures such as you experienced.. FYI, the output shaft supports the tail end of the planetary carrier and also keeps the sun gears centered in the rear planetary gears.. If it becomes loose in the bearings, it becomes a free-for-all inside the planetary pack!! Also, the preload on the output shaft bearings has to be checked and adjusted with the planetary removed..
@petebusch9069
2 жыл бұрын
Massive Job
@markhicks9545
Жыл бұрын
Job well done there
@johnhunter2568
9 ай бұрын
At our shop in Indiana I have a 4955 transmission torn down. I have a question was there thrust washers on both sides of the last gear you put in the output planetary in the center of the transmission? The one you replaced the bushings in at 8:40. Appreciate it thank you from Indiana
@powermaniac79
3 жыл бұрын
Wat was the cost for this operation in parts?
@mikescaffo4850
2 жыл бұрын
Well done
@CH-dk8cs
Жыл бұрын
How do you get the pto gear & clutch out. Have tractor split rebuilding front half. Got the cherry picker on the gear with the bar to lift. Pull it forward and it hits on bottom of housing. Supposed to pull lift and tilt right out by manual. If you had any issues w that. I’ve done one before and it pulled right out
@danielallerton1805
Жыл бұрын
Hello. Did you change the pto clutch too. It may be slipping on my 4055. Be a big enough job to do?
@JSMachineWorks
3 жыл бұрын
i completely destroyed a powershift last year. didn't break ring gears an plates, but all of the output planetary gears were smashed. Turned out to be cheaper to replace the entire clutch pack rather than rebuilding.
@RC4Engineering
3 жыл бұрын
I had priced up replacing the whole unit, but repairing it was by far the cheaper option for this one.
@JSMachineWorks
3 жыл бұрын
@@RC4Engineering well the gears are Really expensive so maybe that's what did the difference
@MrRobinsjanis
3 жыл бұрын
Nice video. How much did the repair cost? Is it hard to put everything back together?
@RC4Engineering
3 жыл бұрын
Thanks, it’s responsible complex but pretty well thought out and more serviceable than you would think. The diagnostics with the powershift can be more troublesome than the rebuild. This went back together very well, there’s a lot to get right but I stick to my own method and follow the literature where needed for specs,torques and tolerances, and it all falls into place (usually)
@trevormansfield6740
3 жыл бұрын
Recently subscribed. How many hours roughly would a full rebuild take. I realise it can vary a lot.
@RC4Engineering
3 жыл бұрын
Hard to say exactly, there’s always other thing that eat time along the way, but I would say if I wasn’t doing anything else to it and stuck at it with parts at the ready, u could limp it in on Monday morning and drive it home Friday.
@devinrobinson1602
3 жыл бұрын
What do you use to seal between the input planetary housing and transmission case ? It doesn’t look like there was any sealant there when it came apart.
@devinrobinson1602
3 жыл бұрын
I am referring to where the oil ports are on the flange
@aaronkirwan5922
2 жыл бұрын
Loving the tunes mate good taste
@beekeeper741
3 жыл бұрын
I can see your knowledge of JD is very great. May I have a question in the model JD 4055 lost gears over ten. Which part of the gearbox may have been damaged (which is responsible for gears ten to fifteen?) How much parts for such of repair in the US can cost ? Regards from Poland
@RC4Engineering
3 жыл бұрын
Difficult to say what the problem is with out testing the transmission! But from what u describe I would have a guess that something is wrong with the rotary controls valve which is operated by the gear lever, each gear in the transmission is a combination of 4 out of 9 clutch packs engaging at the same time to create one speed. Each of the packs used in 10-15 are used in lower gears & Reverse. which indicated the individual packs are ok and maybe the actuation of them is the problem. There are so many thing that could be rong, maybe u have a issue in the lower gears but just can’t tell yet. It needs testing really. Can’t say on cost as there are so many variables and I’m uk mate.
@patrickmcgirr5635
3 жыл бұрын
Very good enjoy john deere repairs
@deanlimbacher6946
3 жыл бұрын
What did it cost to rebuild?
@nichitapavel3098
2 жыл бұрын
Can you give more picture and mor info how to dismountling transmision jd 4755. Regards from Romania. You are using some special tools for dismountlung
@iantowers6972
3 жыл бұрын
Just subbed dude,film some more of your jobs you do fella,defo interesting having a look at other folks way of doing stuff,especially JD stuff,I live in Ripon the home of Ripon farm services John Deere dealership ,who do you deal with fella!??👍🏻🇬🇧😊😊🤘🏻
@RC4Engineering
3 жыл бұрын
Thanks for the add👌 I went to college with a guy who worked at RFS back in the day. I forget which depot he worked at, My local is Smallridge Brothers, all genuine parts come from them, they are pretty helpful
@BassenLandmaschinen
3 жыл бұрын
I saw a couple of stickers in German on the B-pillar. Does the tractor come from Germany?
@RC4Engineering
3 жыл бұрын
This one came from Spain before it came here.
@robertlonsdale3826
3 жыл бұрын
@@RC4Engineering did Richard E bring it in ?
@fendtbluebird4701
2 жыл бұрын
Is the new e23 a Funk Transmission?
@Mekzuc91
3 жыл бұрын
sheesh mate you've got to tell us what that jd box of goodies was worth!
@vadym1316
2 жыл бұрын
How much this repaire is? May be good used tractor is more cheap?
@floringaitan1275
2 жыл бұрын
Unde este electrovalva la 4wd?
@farming_ua
9 ай бұрын
Good day I'm from Ukraine Recently bought a John Deere 4650, after repairing the gearbox, problems began On 3, 4, 6, 8, 10, 12, 14 forward gears it seems like something is slowing down, it is very difficult to drive and 1, 2, 3 reverse gear is almost impossible to drive Could you suggest something, did you have something similar? I will be very gratefu
@floringaitan1275
2 жыл бұрын
Îmi puteți spune unde este electrovalva la un4455?
@aliabtahi2313
3 жыл бұрын
thanks all alone and no help !! . How many hours , cost of parts, total bill ?? your bill ?? OR dealer bill ??
@sepresley1
3 жыл бұрын
i just bought a 4955 with a power shift. Typically how long do these transmissions hold up...mine has 5300 hours
@RC4Engineering
3 жыл бұрын
I’m not sure if there is a pattern with them, the main advice would be if you notice something wrong even if it’s small, get it checked out! U might save yourself a bigger bill in a couple hundred hours time! I think at your hours you are prob good for a few thousand more. If I was to do anything to keep it in good order it would be to get the transmission accumulator gas pressure checked, as that will stop any slippage when changing gear under load and it will keep the gear change quick. Also keep good oil in her!
@sepresley1
3 жыл бұрын
@@RC4Engineering i apreciate that. I will get it checked as soon as possible
@xDemann
3 жыл бұрын
@@RC4Engineering you recomend hygard for them or is there a better option available?
@RC4Engineering
3 жыл бұрын
@@xDemann Yea Hygard is ideal, You know your safe with it.
@dogwoodish
3 жыл бұрын
cost?
@lukedog7028
3 жыл бұрын
I am betting the odds of putting that all back like factory without forgetting something or without misunderstanding something is about 0
@RC4Engineering
3 жыл бұрын
It’s not that bad, they can be trouble but mechanics is mechanics. Try todo everything to a high standard don’t cut corners and it should be fine. The hydraulic circuits on them can be another story mind but this one was spot on, all back together first time working a treat
@lukedog7028
3 жыл бұрын
@@RC4Engineering glad there are folks with such skills as yourself to keep things running.
@hadzicana1
2 жыл бұрын
бад видео 1.40 зашто ниси рекао колики треба да буду притисци на контролним тачкама и где су контролне тачке? правите видео и не разумете шта радите? kao na primer cene opravke sa koje je strane auspuh i slicno --pa zato imas od takvih bolida 900 unit - koji su te pozitivno ocenili VIDEO cilj- treba da bude TUTORIJAL a ne abortus video za izdrkavanje pameti
@devond2675
3 жыл бұрын
Hope you get paid well lol
@GrandTour_Fan_Ukraine
2 жыл бұрын
Good morning! I farmer from Ukraine 🇺🇦 Have a John Deere tractor 4650. How much rebilling transmission? My transmission failed.... Moved just back,
@RC4Engineering
2 жыл бұрын
Hello mr Ukrainian Farmer! Hoping you and your family are safe and well! To give you a price for repair would be very difficult without testing and stripping your transmission down, there are so many different elements involved, maybe yours isn’t as bad as this one was, but if you were going for a full rebuild here in the uk with considerable damage inside then you would probably be heading towards £8-10k for everything. There’s just far too much to consider to guess a figure! I would ask, what gears do you have? What gears don’t do anything? Is the pressure light on? Sending well wishes and respect to you and your community! Rich
@GrandTour_Fan_Ukraine
2 жыл бұрын
@@RC4Engineering Thank you! My family in safety. I bad speak and understand English. But I'm try wrote without an interpreter))) We live in central Ukraine. Dangerous but we are with is family. Two days ago, my tractor was driving forward to 11 gear. 12-15 gears not working, thay working after cultivated 10 hectares, bad working... Gears seem to slip. Gears to 11 tractor going wery well Today. When shifting gears from 10 to 11, tractor stopped and did not go to forward. Rear gears good working. One month ago, lighting lamp, low pressure. I changed filters and problem is gone. My name is Vlad)) How your name Our people are very grateful to the people of Great Britain!
@RC4Engineering
2 жыл бұрын
Sorry only just seen your reply! My names Rich, it seems like you have something serious going on inside the output planetary housing, I understand things are very difficult where you are and you need to get the work done, but I fear that the more it’s driven the more damage will be made. Try to stay out of any gear that doesn’t engage straight away to keep her going as long as you can, I know this is not much of a help to you sorry I can’t say or do more without looking at it myself Rich
@peteparker7396
3 жыл бұрын
Only JD that had the round cab and exhaust off the side are 60 series. Not 55 series
Пікірлер: 85