i got rid of mine it just i got a new john deere so now i just sold the deck the tractor is just turning into a racing mower
@boldger13
9 жыл бұрын
Good video. Thank you.
@harrison4803
9 жыл бұрын
+Maxwell Goodacre Thanks for the encouragement, Maxwell! I see that you have/or are graduating as an Environmental Engineer. I am a retired Civil. I specialized in the water/wastewater area, however, and thus thought of myself as a quasi-environmental. Best of luck out there!
@boldger13
9 жыл бұрын
Thank you. I recently earned first place in a student design competition (Florida) and second place at WEFTEC (Chicago national competition). My project was based on a bench-top scale bioremediation of phenol waste.
@dougprior8016
2 жыл бұрын
You did not show how to connect the front of the front draft bar nut and ball.
@harrison4803
2 жыл бұрын
True, Doug. Go to the link I show in the description, for an updated version, at 10.30. Thanks for watching!
@deeduffy9876
2 жыл бұрын
Everything I needed to see you said I’m gona stop so I can do this part. How did you lift the blade cover to get the front rod in the hole?!?
@harrison4803
2 жыл бұрын
Are you talking about the rod on the front of the mower deck? If so, you have put your wrench on the belt spindle & pull clockwise to loosen the belt so you can wrap it around motor pully & that should pull the rod forward enough to go into the hole. Let me know if this is what you meant.
@rodferguson2169
2 жыл бұрын
Blade attachment
@harrison4803
2 жыл бұрын
Here is my Blade replacement video: kzitem.info/news/bejne/sn6drHWZsmpyeno
@marksokolski3517
3 жыл бұрын
What belt did you use to replace it with?
@harrison4803
3 жыл бұрын
Mark, I used the GX20305 Flat Belt. It is a 48" & I got it from the local JD Dealer. Here is an updated video on this, if interested: kzitem.info/news/bejne/xKqPwHiLr2d8iZw
@jackdaniels7271
5 жыл бұрын
How do you adjust the deck height on a L130 john deere
@harrison4803
5 жыл бұрын
Jack, this manual shows you how: manuals.deere.com/cceomview/OMGX21647_K3/Output/Index.html?tM=HO
@robertthackston8504
8 жыл бұрын
Great job , I am changing blades on my L 130 and deck belt, this will help. Thanks, Robert
@harrison4803
8 жыл бұрын
Glad I could help, Robert! Thanks, for your comments and for watching!
@luderiffic1
8 жыл бұрын
Do you use mulching blades or regular blades?
@harrison4803
8 жыл бұрын
+Christopher Hallam Chris, I use regular blades. I am thinking about changing to mulching, when these wear out. Thanks for watching!
Пікірлер: 18