Very well done! Definitely the definition of attention to detail and it's great you can enjoy it together.
@davidbrewer8309
4 жыл бұрын
Nice boat, but holy cow that's pushing the weight limit of what a Jon boat can hold. I used aluminum C channel to build my front deck. Sturdy as a rock.
@kaybee2278
4 жыл бұрын
actually, you are correct, to a certain extent. the fact is, is it too heavy for the boat? no. is it too heavy for a 9.9 evanrude, slightly. when I built this I was thinking, I'm a barefoot guy, so I went with 1/2" treated plywood. but I have been seriously considering replacing the plywood with aluminum & just wearing shoes. but again , only because the 9.9 evanrude seems underpowered.
@scottshaper
2 жыл бұрын
Very nice
@larryjohnsun3306
4 жыл бұрын
Super impressed y'all did a very good job I'm proud of y'all
@texascoastwandererkayakfis672
4 жыл бұрын
Wow !! Nice job on it !! I did mine pretty similar to u folks color scheme lol.. I just finished mine last week ..i did a boat wrap on it myself .. Maiden voyage this coming Monday ! Looking for some fenders to not scratch the wrap. Just subbed !!
@goatman702
4 жыл бұрын
Clean AF
@skippyboy88
7 жыл бұрын
They say you cant polish a turd but you sure can roll one in glitter. nice job
@Billyboy4209
7 жыл бұрын
skippy boy 😂😂😂😂
@goatman702
4 жыл бұрын
Bruh who TF thinks of this shit🤣🤣🤣🤣
@suavelifestyle9094
Жыл бұрын
were you sanding it at the begining?
@punishersoriano2895
6 жыл бұрын
great build, love the setup.
@retiredoldsarge5938
6 жыл бұрын
Very Nice... Looks really good.. .I wish you had did more of a step by step on how you did what on it. It looks really good...
@tooleyboi491
5 жыл бұрын
How wide is boat
@kevalva425
4 жыл бұрын
?
@KayakChris
7 жыл бұрын
Beautiful job!
@jacksonedwards4870
4 жыл бұрын
You should put sea deck down
@derrickclark9118
6 жыл бұрын
Really nice setup!!
@drewwilson145
4 жыл бұрын
You da Man. Nice job
@HensleyCaleb
4 жыл бұрын
Great job!!! Looks awesome.. i fish the lafitte area. Lets fish together! I have a 14 ft with a 48 evinrude on it. I want to paint it but its a pain to remove the console and all the wires
@Cubanchris305
6 жыл бұрын
Did you just paint the wood or lay aluminum over top?
@kaybee2278
6 жыл бұрын
Sanded it and painted it it is a silicone based Marine Paint
@EchoScreen78
6 жыл бұрын
Nice job man, I have one that's a lot like yours that I've done some work to (and I plan to do more). Well done
@kaybee2278
6 жыл бұрын
Maine Angler , I really wasn't worried about how much $ I spent, I have a bag of receipts that I refuse to add up. I bought boat/ trailer & motor from a friend = $300 , $240 to refubish engine, I'm guessing less than $1000 for everything else.
@bobbyandras6630
3 жыл бұрын
Good times .I know the feeling
@edwarddorsey2631
6 жыл бұрын
Wow nice job!
@evarflorendo1989
6 жыл бұрын
Awesome job
@PRIMOS413
8 жыл бұрын
Great job!!!!
@mrmotocross6819
5 жыл бұрын
12ft jon?
@kaybee2278
5 жыл бұрын
14 foot
@41magfan
6 жыл бұрын
You'll never get back what you put in to it but I like it just the same.
@GetOutTheHouseGoFish
6 жыл бұрын
Great job with the boat, subscribed. Loved the addition for the radio and fish finder.
@carhar5975
4 жыл бұрын
What brand of paint did y’all use!!!! And what color was that blue
@kaybee2278
4 жыл бұрын
Rustoleum 2X Seaside Blue, & on the Bottom I sprayed a separate layer of Rustoleum Turquoise Glitter, the idea was to be like a tacky bass boat bottom.
@Drumaboiiii
7 жыл бұрын
crazy good job
@kieranblair3218
7 жыл бұрын
What have you coated the wood with? And have you had any problems with it? Awesome job though man, looks great!
@kaybee2278
7 жыл бұрын
it is a silicone based paint, its been about a year, & still looks great!
@kieranblair3218
7 жыл бұрын
Did you treat any of the framing wood or just the deck wood? I'm new to this so any help would be great
@kaybee2278
7 жыл бұрын
all wood I used is pressure treated, I only painted what could be seen on top.
@markymark3075
7 жыл бұрын
Nice one!
@behnam22
5 жыл бұрын
Just want to know how much you spent on this?
@kbrass42
7 жыл бұрын
I am working on a video where i walk around & show you the finished product. (Kay Bee & Kbrass42, same person)
@BoY860
7 жыл бұрын
How are you steering the boat?
@kaybee2278
7 жыл бұрын
throttle handle
@BoY860
7 жыл бұрын
Kay Bee O wow, can barely see it. looks nice sir.
@elboregojhb
7 жыл бұрын
that's awesome
@aaronlyons5061
7 жыл бұрын
what size jon?
@kaybee2278
7 жыл бұрын
14' alumacraft
@wiillthebarbertv9415
4 жыл бұрын
Nice!!!!
@Tackletuesdayfishing
6 жыл бұрын
I’ve seen this boat on Craigslist
@kaybee2278
6 жыл бұрын
Derek Matusch I don't think so, I made it, & I still own it, & never tried to sell it. Must be similar.
Пікірлер: 57