Killing it with these sff builds. Cannot wait to try something like this for myself. LOVE this build!
@dilmidilmi
3 жыл бұрын
u are not a pc builder u are a ART maker
@wolfgangchristl9978
3 жыл бұрын
Badass looking motherboard, oc-formula was always the best oc model for years! Glad to see them bringing it back.
@cops9499
3 жыл бұрын
What a great build it reminds me in the inwin 925 which is my favourite build in the channel as always thanks for sharing This with us .
@sorasoki
10 ай бұрын
so clean
@skatertwig26
2 жыл бұрын
This looks so good. I love the paint trim on the back. Wish I could buy it like this , at least for the paintjob haha
@straightcirclee
3 жыл бұрын
🔥🔥🔥 as always
@modbay6535
3 жыл бұрын
That colour is lovely. Nice build.
@MrLynx777
3 жыл бұрын
Just a perfect build for me, itx,strong,watercooled and no all RGB
@KG_BM
3 жыл бұрын
I love these review builds. I still go back and watch the antec p120 one from time to time. If you want to do a bigger white build, antec has a white edition now if you wanted to do another white build with maybe, i dunno.... red accents
@GGFEvents
3 жыл бұрын
Thank you. Will check it out
@CESAR_H_ARIAS
3 жыл бұрын
On the standard layout this case could support dual 360 rads, its waaaay powerful cooling option, i have an Nr200 with dual 240 slim rads and kind of wanting a bit more cooling
@GabbyTech
3 жыл бұрын
that fe block is very nice
@curtfont
2 жыл бұрын
Awesome modding, but I think you should've left everything like it was and have the space for the three 120 fans on the bottom for better cooling.
@Squinoogle
3 жыл бұрын
Very nice. A "chilly" 19C ambient... is it not winter yet?
@abccool1314
3 жыл бұрын
Very awesome and unique.
@TheWhatNotProject
2 жыл бұрын
I have this same case, I managed to mod in a second 360 mm rad in the bottom, giving me 2 360 mm rads
@lhbbq
10 ай бұрын
@GGF Events - Amazing Build - Were the temps at the end based on the panels on the case or off the case? Thank you in advance.
@T3chnoJunk13
3 жыл бұрын
Dope build as per usual...👏👍
@mrktrmp
2 жыл бұрын
It looks amazing mate, do you also sell your builds?
@AniSepherd972
3 жыл бұрын
awesome build! more sff please!
@lhbbq
10 ай бұрын
@GSF Events - How did you get the FLT 360 next to the power socket? According to EK, is that FLT thick? Is there some pressure applied to the power socket? According to EK specs, it is 25.5mm thick? I purchased this case, and I like how the reservoir is incorporated. Thank you in advance.
@hcd05
Жыл бұрын
Great stuff, just looking to build a watercooled system in one of these cases. Why did you choose not to use another radiator at the bottom? 240/360 slim perhaps?
@user-lf2bo5zk6i
3 жыл бұрын
Could you tell me what is the water temperature of the 4 test?
@TParkcasual
3 жыл бұрын
Really diggin' that copper, actually looks like it came like that. Cheers mates.
@CESAR_H_ARIAS
3 жыл бұрын
I love the looks of this case..... But damm that price tag (349 on newegg)
@Grimmwoldds
3 жыл бұрын
That's Corn. They're worse than Antonline, very scalpy. Once Jonsplus gets more authorized distributors(Currently only S. Korea and Germany) and some legit China marketplace official accounts, the price will trend down towards the actual 160 USD price.
@CESAR_H_ARIAS
3 жыл бұрын
@@Grimmwoldds taking account the price at china + shipping its about the same with slower shipping speed to order directly from china(20-)
@davidl8523
3 жыл бұрын
great tips
@shlamhabor
2 жыл бұрын
Do you think it is possible to use the bottom fan place for a slim rad and mount slim fans on the outside of the bottom?
@nitrouspeed3583
2 жыл бұрын
Quick question, does the D5 version of the FLT 360 fit or is the DDC version mandatory?
@Red_X33
2 жыл бұрын
where can I buy EK badges? They look amazing custom !
@joachimvenaas
3 жыл бұрын
I have the same case and i’m considering a FLT 360 as well, did you do any modification to the pinout board under the powerbutton and usbs?
@MantriKelautan
3 жыл бұрын
The best
@thuanluong2138
3 жыл бұрын
Really curious how you mounted the psu at front of the case.
@intrasonic
2 жыл бұрын
At what RPM were the fan spinning for those temperature measurements?
@spazzjunk
3 жыл бұрын
Which RGB module did you add that controls brightness?
@katravathnayak1409
3 жыл бұрын
Does this case supports 360mm crossflow radiator?
@gibranazhar3188
Жыл бұрын
how much money did you spend to build this?
@imsaltybro4229
3 жыл бұрын
i fuckin love ur builds
@romanpirschel3053
3 жыл бұрын
Is 700w psu enough for this build? I am not sure....
@GGFEvents
3 жыл бұрын
More than enough.
@Appolyon99
Жыл бұрын
You should get a turntable so you don't have to bother flipping the pc around so much when reviewing the build.
@GGFEvents
Жыл бұрын
Turntables are ugly
@Jaspirin
Ай бұрын
mhmm, i dont like this build. I cant help, but it looks like a big hole above the Powersupply, if something is missing there.... The one Tube crossing to the GPU is not enough for me, for the Optic..... I am sure you put a large amount of effort in this build, but for me it looks not good.
@Riko_KP
2 жыл бұрын
Rose gold? That is copper.
@GGFEvents
2 жыл бұрын
No
@shiftednrifted
Жыл бұрын
I agree. It's Copper. Rose gold is way brighter. It may have been sold as rose gold paint but its copper colored.
@TimLongson
3 жыл бұрын
I really don't understand the attraction of small PC's - PC's are BEAUTIFUL, and with addressable RGB especially, the BIGGER the BETTER. More full SUPER TOWER case builds please, with custom water cooling using all 140mm fans and multiple 560/420mm radiators, with near ambient CPU and GPU temperatures, for ultimate stability and longevity please. :)
@ptahclips
3 жыл бұрын
The abandoned puppy additionly injure because vision descriptively transport in a descriptive perch. satisfying, elfin centimeter
Пікірлер: 51