This is just a quick video on how to get into the service mode on your JR PCM9X transmitter, first off make sure all switchs on the front are up and the switchs on the top are switched back now you need to get it into the start up menu by holding down on the roller and powering it up , you need to scroll to the trim setup and highlight the aileron before you start the sequence you need to hold down the trainer sw and dont release it now push the roller and then switch the aileron daul rate sw down then push the roller and flick the aileron daul rate sw up keep repeating the process about 5 times before the service menu appears once that appears then you can release the trainer sw ,
Негізгі бет JR PCM9X Service Mode
Пікірлер: 3