Just got mine last week. I am a huge JRL fan. Smoothest clipper I have ever used. I use the slow speed for detailing. It allows me to get higher up in the fade and get dark spots without taking too much hair off. The thing about this clipper, that is so underrated is that the blades do not get hot. They definitely warm up a little bit. But they do not get hot like other brands. I have a style craft instinct clipper. That thing heats up like the sun after 5 min
@akhmadkusairi6759
Жыл бұрын
How about Instinct with jrl blade? I have jrl clipper but i want to buy clipper same as Instinct to cut faster, but i want this onyx too.. So what you prefer for cut faster
@jasonmercurio1928
Жыл бұрын
@@akhmadkusairi6759 you could try it. I don’t know if it would have the same cooling effect because the motor in the instinct is much different. I personally think there is too much power in the instinct for how big it is. I would personally go with the Onyx. But that’s just my opinion.
@desmondmitchell5602
Жыл бұрын
On your instinct I had the 1st model they came out with. It ran 9800 rpms. But I have the newest version now. And it runs at 8800 rpms and that made the blade run way cooler. It never get hot anymore.
@jasonmercurio1928
Жыл бұрын
@@desmondmitchell5602 I wasn’t aware that they came out with another model of the instinct. I thought it was a brand new clipper. I love the way mine cuts. But literally after five minutes the thing is burning.
@desmondmitchell5602
Жыл бұрын
@@jasonmercurio1928 yeah did you get it when it 1st came out.. if you did return.. they didn't announce this problem or the motor speed change but I have a rpm app on my phone and I figured it out...
@barberciscobarberfranky6354
Жыл бұрын
Broooo. I’ve been rocking with you for 3+ years. I literally owe you my career since I learned how to cut on your channel. It’s just crazy to see the quality in video back in the day to now. You do all your own editing?? Just props. The quality in subject matter is always on point but my salute to you my guy!
@YouTubeBarberAcademy
5 ай бұрын
I know you made this comment a while ago. I’m very sorry that I never seen it. Thank you so much for the kind words. Appreciate you.
@arrowhead9027
Жыл бұрын
It’s my favorite to use the Jrl 2020c and yes slower speeds help with after the fade is done to detail.
@azizoffr
Жыл бұрын
I always use my JRL on slower speed. I only use it on faster speed when I take out bulk.
@victorcedillo9338
Жыл бұрын
Got same 2020c since 202, without battery degradation and it charges quick.Still using it today and I have two clippers in case it goes out one day. Since it opens up to 3.5mm Im able to fade from blade to 1 to 2 then shear over comb pretty simple steps no over-engineering needed.
@kevinrodriguez-bi5im
Жыл бұрын
The slower setting is good for thin light hair or thin in general. Its more forgiving
@sandman1133
Жыл бұрын
Just the stand, the color, and the extra hour of runtime is enough justification to buy imo. I mean some companies just change color way and add a $30-40 pricetag on the same exact machine.
@stephenmiller5572
4 ай бұрын
I like that it has play between the clicks. More options for your blending.
@trey3843
Жыл бұрын
I always use the slower sleep on my JRL i use it like a oster fast feed even brought the King Clipper mod for the JRL to Oster Still Blade and Cutting Blade just use it for Blending
@YouTubeBarberAcademy
Жыл бұрын
Good tip!
@Deebohuncho
Жыл бұрын
This is honestly miles better than any stylecraft clipper, only reason why it makes noise with the dub guards is because it wasn’t made to use with the dub guards. The dub guards even rattle with my style craft instinct out of the box
@EeveeLO6
Жыл бұрын
Just placed an order for Onyx clippers with your discount code. Thanks!
@jumpymonkey00
Жыл бұрын
I waited to get the gold 2020c since I heard there were issues with the original. I’ve had issues with certain types of hair but I don’t know if it’s the clipper or that faper style blade. I love the two speeds, it’s like have a Senior/Magic combo in one clipper.
@davidberry9226
4 ай бұрын
The sponginess is because the lever is made to be a combination of both floating and click. Kind of the same idea as with the faper blade. Best of both worlds.
@intralockshorts
2 ай бұрын
what was the hair type that you struggled with? it would help someone watching who’s majority of clientele is that hair type
@icecreamdee
Жыл бұрын
I got the gold JRL clippers a few months ago, with the gold taper blade and it’s a fantastic clipper. I will not be upgrading. I also have the rebel clipper an hour ago clip of as well. I put the gamma ceramic stagger blade onto the JRL clipper it made the clipper quieter cuts so much better than the blade that’s already on there. Please try it’s amazing specially for fading. So try the gold taper blade with the gamma ceramic stagger cutting blade together 👍
@FofXequalsYnot
9 ай бұрын
Thanks for sharing your knowledge !🫶🏽
@LKKAIG
Ай бұрын
I just bought a gamma staggered tooth blade but it seems like it doesn’t fit did you have to modify it at all?
@archiexEM
Жыл бұрын
Slower speed is useful with detailing the fade…
@massterrbarber
Жыл бұрын
The only problem is that you’re not reviewing the best clippers out XTRIMUSA clippers by XTRIMusa made in New York they have their own blades and guards and the Onyx jrls are amazing clipper and still nothing can beat my saber trimmers awesome review.
@YouTubeBarberAcademy
Жыл бұрын
I have never heard of those
@victorcedillo9338
Жыл бұрын
💩
@kodee81
8 ай бұрын
Great video I just got the cyborg from gamma I would have gotten those if I had saw them
@MrDannysomebody
9 ай бұрын
I have the new jrl onyx nd first jrl and it feels like lexus of all clippers in my opinion
@neil231
Жыл бұрын
I have the previous version. I changed to a fade blade because the taper blade was crappy. So far so good.Probably not going to get the updated version!!!
@_mattcuts2984
10 ай бұрын
I love the JRL clipper but I noticed with wet hair it struggles during clipper over comb
@joshjoeyanddad2424
11 ай бұрын
The onyx is wayyy better than the Stylecraft instinct
@justcryHavok
Жыл бұрын
There’s 3 different types of levers. A spring click, a click, & a floating. The spring click is the tightest & the click is a lil looser so it’s like a floating but u still know where the clicks are. I know this cause my Rebel came with all 3
@YouTubeBarberAcademy
Жыл бұрын
Not sure on all that never seen so much play in between clicks tho
@justcryHavok
Жыл бұрын
@@KZitemBarberAcademy I’m not sure about the new JRL(since I nvr had one) but I’m not mistaken bout the click & spring click. Mof u don’t even have to take my word for it. Just view the contents of the Rebel or Instinct, you’ll see
@massterrbarber
10 ай бұрын
My #1 clipper is XTRIMusa I have one with the taper blade and other with the fade blade I have other clippers and I just keep going to the XTRIM clippers. I have thought about using the jrl but my next purchase will be the instinct X clipper I see the longevity. Great review I see jrl in a different light now.
@andrewmedina824
Жыл бұрын
I have the gold Jrl , but I did change the blade to a style craft faper blade . My top clipper on my station And I do use the slow mode for all my detail work
@JovanUrBarber
8 ай бұрын
I use the slower setting for detailing it’s nice you should try it.
@jessebaressi572
Жыл бұрын
Luv the video Eddie you’re the best. Does it open up to full 1 ??
@onceyouknowfailure8_249
Жыл бұрын
I only ever use the slower speed and sometimes the fast one but I always used the slower speed in school even now. I have mine since august of 2020 need the new onyx ones though. 😅
@user-uh1nm3dj4l
Ай бұрын
Do you recommend jrl onyx just for styling the beard at home with a fade on the sides do you recommend it? Because I'm debating between the wahl magic clip gold model... what does it mean?
@grgeorgiadis
9 ай бұрын
that you say about the lever...a lot of play before the clicks. is something rong about construction or is something like extra tool between the clicks for fading for more freedom to our moves
@mikedog5289
Жыл бұрын
I have the old jrl one with the taper blade the other with the fade blade they work great but on thick and dense hair it can be a challenge meaning trying to remove the faint line can be tough I will admit the blades were not zero gap other than that it’s great
@user-uh1nm3dj4l
Ай бұрын
If I have to choose one good machine for home use only for styling the beard, which one do you recommend I buy: jrl onyx or wahl magic clip gold?
@davidberry9226
4 ай бұрын
I heard the Wahl premium's rattle on them, have you noticed that? Also what do you think the throw is on them? A half? A 1?
@cristianromano1008
4 ай бұрын
Hi hoots say you have a great channel, I bought a jrl onyx and I wanna know if I can clean them with the andis blade care 7 in one ?
@own_goals_alti
2 ай бұрын
Can i use this to get a clean facial shave?
@tomytrinh264
Жыл бұрын
Mine classic jrl fresh fade just stop running last week after 1 year 🥲🤣good clipper, but i dont think i would buy it again
@kayilla6413
Жыл бұрын
maaannn i've been looking to upgrade my clippers with JRL but i keep reading everywhere that it's lifespan dont last! people keep saying it broke down after few months or just over a year :(
@dannyg2311
Жыл бұрын
Mine too just the other day.
@YouTubeBarberAcademy
Жыл бұрын
Thanks for sharing
@CarlosMedina-yq4hg
Жыл бұрын
@@kayilla6413I’ve had mine 2 years and cut 12-15 heads daily. Still going strong.
@user-qp9kd1yg6t
Жыл бұрын
Amazing review, what flat comb were you using in this video? :)
@YouTubeBarberAcademy
Жыл бұрын
That is a Zuka comb you can check them out in the description they are 20% off with my link
@user-qp9kd1yg6t
Жыл бұрын
@@KZitemBarberAcademy Thank you bro, keep up uploading you are doing amazing job 🙏
@brandonsmith3426
Жыл бұрын
Hi Eddie, I'd really like your opinion on this! I have the LoPro Influencers(faper), X-Ergo(faper), and JRL 2020(taper), as my daily drivers, but I have been becoming more and more interested in the Rebels over the past few months. Do you think it would be worth my time to check them out, or in your opinion would I just be wasting money with the other tools available(I trust you to give me your opinion without bias :))? I'm always on the hunt for something that will be more comfortable and improve the quality of my work, but I also know I'm addicted to buying clippers and my bankroll is low enough, haha.
@YouTubeBarberAcademy
Жыл бұрын
Those are good clippers that you have, the new Rebel has a different motor and a updated cam follower. It’s really actually a very nice new Clipper. It’s definitely one of my favorite. It’s much more quiet than it has more runtime than the influencer edition.
@brandonsmith3426
Жыл бұрын
@@KZitemBarberAcademy Thanks Eddie! I'll go ahead and grab some then - especially knowing about the motor and cam follower - that was one of my big issues with ordering to begin with, and if that's fixed, my potential gripes should already be solved!. Appreciate your insight!
@terrence4069
5 ай бұрын
I use slow speed with fine hair fine detail
@lilac6411
2 ай бұрын
Is it heavy and does it bibrate alot?
@davidberry9226
4 ай бұрын
How's their weight? Say compared to the magic clips or the rebels?
@Eazythebarber210
8 ай бұрын
Is the lever play so much that the old clipper is better?
@vladankostevski5749
11 ай бұрын
Is there a difference between the regular 2020C and the Onyx? Is it worth buying that latest one?🤔
@saidzueke4782
10 ай бұрын
Its worth it. Different motor and blade and housing
@Alycutzz99
9 ай бұрын
Would you buy the gold JRL taper blade or use the stylecraft/gamma taper blade if you have it already?
@YouTubeBarberAcademy
9 ай бұрын
They both have great taper blades, but it depends what machine you’re going to put it on if it was JL I would stick with that. If it was Gamma , I would stick with the Gamma .
@Alycutzz99
9 ай бұрын
@@KZitemBarberAcademy i have the jrl onyx witch has a fade/fusion, but i have a gamma taper blade at home
@Alycutzz99
9 ай бұрын
Should i use that om the jrl or is it better to buy the jrl taper blade
@FofXequalsYnot
9 ай бұрын
@@Alycutzz99no response… Exactly my question, should i mount d JRL taper blade ? I’m not a fan of fade blade🤷🏾♂️
@stefaniemunoz-vargas3646
11 ай бұрын
I’m having a hard time trying to zero gap keeps moving or even it’s even it bites any tips or can you do a video?
@quackingnakedshort3930
11 ай бұрын
Have some one hold the blade down for you while you screw it in
@حسينكاظم-و9ط
5 ай бұрын
In your opinion is it better than the old version And how can I distinguish between normal and original
@YouTubeBarberAcademy
5 ай бұрын
The blade the old one has a taper blade the new one has something closer to a fade both great machines and enjoy both blades
@حسينكاظم-و9ط
5 ай бұрын
@@KZitemBarberAcademy In your opinion who is the best old or modern version and is it worth the difference of 50$ the modern version
@brooky.mesfin5791
6 ай бұрын
Does it open to a1 like the masters
@yvenslouis3880
11 ай бұрын
Where can i find one to buy please?
@Desert__eagle
10 ай бұрын
Why use a different 4.5 comb?
@ajshaw2169
2 ай бұрын
Which guards should I buy with these
@Junior.271
2 ай бұрын
Wahl premium fit on them
@massterrbarber
10 ай бұрын
Nice clipper
@user-xg3dj7sl9q
Жыл бұрын
Hi help me choose between babyliss influencer edition Clipper or jrl onyx Clipper or troll tpob Clipper, which is better and if you can tell me why please bro
@intralockshorts
2 ай бұрын
what did you get?
@javi_fades3880
Жыл бұрын
Have 2 of them and I use the slow speed for the actual fading of the hair about 75% of the time
@user-sn7ee4fk3g
7 ай бұрын
Yeah, for a while, then it’s gonna get lowered anything, and no fowler is going to improve it
@desmondmitchell5602
Жыл бұрын
Babyliss,jrl,wahl
@Deebohuncho
Жыл бұрын
All 3 better than style craft gamma
@desmondmitchell5602
Жыл бұрын
In my opinion!!
@emmanuelhayden2449
Жыл бұрын
The first JRL struggled with African American hair
@koekoemoejrvlogz2Ez
11 ай бұрын
Course hair my guy lol
@emmanuelhayden2449
11 ай бұрын
@@koekoemoejrvlogz2Ez which is common in what group of people?
@saidzueke4782
10 ай бұрын
Yes they blade was bad. U put wahl blades on it
@JesseHubbs-t8h
10 күн бұрын
Moore Frank Allen Mary Lopez Michael
@VivianGarza-g3k
Күн бұрын
Johnson Edward Wilson Lisa Miller Susan
@JoshuaMO33
Жыл бұрын
Probably going to go with jrl my instincts get too hot and are becoming unusable. Sad I wasted hundreds of $ on them 😢
@YouTubeBarberAcademy
Жыл бұрын
I would try taking them apart and oiling them and cleaning out the Cam Follower‘s my instincts never get hot
@JoshuaMO33
Жыл бұрын
@@KZitemBarberAcademy I’ll give it a shot
@Deebohuncho
Жыл бұрын
@@KZitemBarberAcademy respectfully no amount of cool care and oil will cool down that thing lol
Пікірлер: 108