Setup BC3:
Gain to "Max" position (rotate to Right)
Offset to "Min" position (rotate to Left)
Slightly return OFFSET knob backwards, so that it stands in the position just before start changing.
Check if the "Breath/Polarity" switch is in the right position
For YAMAHA Breath Controller it must be (right)
Hardware Setup:
Enter Menu by [BackSpace] + [NumLock]
Find "Breath Setup" by [+] button (two times)
Enter "Breath Setup" menu by [Enter], then "Hardware Reading"menu by [Enter]
Browse parameters by [Enter] and change values by [+]/[-].
Read Inversion must be "YES"
Gain - "x7"
Offset - "892"
Remember this number!!! it must be approximately 130
Exit "Hardware Reading"menu by [NumLock]
Software Reading:
Find "Software Reading" by [+] / [-]
Here we need to enter the "REMEMBERED digit" + 15 in our case 130+15=145
Gain must be "x1:75"
Bypass On Value must be "OFF" becouse Yamaha BC3 has not this function.
Bypass Off must be "1006"
Exit menu by [NumLock] use [+] to find "To Sampler Audio" and press [ENTER]
ToSampler Audio:
Responce speed must be "30Hz"
Responce Curve - "LOG"
Now YamahaBC3 can work with Sampler M I C R O
Exit menu by [NumLock] use [+] to find "Save Breath" and press [ENTER]
Change to "YES" by [+] and press [ENTER]
Негізгі бет JS Breath Controller Settings
Пікірлер: 3