I don’t think you talk to much! I like all the information you are giving! I have never seen on an industrial sewing machine and am trying to learn as much as I can as I will be using one of these machines.
@Sewinggold
3 ай бұрын
Thank you! 😊
@creativitybycarilyn6634
4 ай бұрын
I didn't use my machine for a long time and used a vintage Singer machine that needle threads in the opposite direction. Came back to my industrial and couldn't get it to sew...until now that I see I threaded it backwards. Duh!! Anyhow, my machine is not broken and I am happy. Thanks for this video!!
@sandrasews3765
2 ай бұрын
Hello Steve , every time I forget something about this machine , I will go back and rewatch the tutorial videos
@SillySeamstress
4 жыл бұрын
I don't have a Juki machine, but I do have a very similar one, and it was giving me no end of trouble. Your video helped me fix my machine problem, and saved me a lot of money. I was literally in the process of ordering a new machine when your video came up on my Roku. Thank you. Many times, thank you!! By the way, my problem was with the little wire hook. It was such a small detail, and such a huge impact. Thank you again!!!
@Sewinggold
4 жыл бұрын
I love to hear stories like yours. Thank you!
@steve0inmontana811
Жыл бұрын
Great video . I just bought the Juki 1541s and have no idea what I’m doing 😂. So your video was very informative. PLEASE make more. Thank you.
@yoliebean
4 ай бұрын
You are so helpful! And you definitely don’t talk too much 😊
@katherinepoindexter4380
3 жыл бұрын
you helped me a lot with the tension threading. I know know what happened with my machine at work. so when needed I can know thread the machine correctly with the tension disks.
@elisabettarenwick6269
4 жыл бұрын
A very helpful video. Thank you for making and sharing it. I appreciated how clearly you explained and then demonstrated the user error you were talking about. I learnt a lot from you by watching this video.
@Sewinggold
4 жыл бұрын
You are most welcome.
@alpanosap
2 жыл бұрын
Thank you so much Steve for sharing this very helpful and informative video whith your clear explanation, theese thips are really vital and it'll takes long time for new tailors to discover them but you just made those like a piece of cake thanks again for all yor efforts.
@eunaridenour2750
4 жыл бұрын
I appreciate you doing this video. It's helpful to see this. I'm having issues with my thread getting caught under the spool, so I added a plastic thread cover to help feed the thread.
@Sewinggold
4 жыл бұрын
There are thread nets too that help that problem.
@edweirdmassey
3 жыл бұрын
I find a piece of woman’s nylons works great as well and one pair will make six nets
@hafsafossie7074
Жыл бұрын
Your videos are very helpful, never do you talk to much thank you
@crayonfou
Жыл бұрын
Very generos of you thanks a lot. I have done every single mistake you are listing here and been sewing for a long time.
@Sewinggold
Жыл бұрын
It happens to me too.
@LizMcDon
4 жыл бұрын
Fantastic video Steve. One time I had the problem with breaking thread and after getting frustrated, I realized the needle was in backwards. All new owners of an industrial machine need to watch this video. Thanks so much. Love it.
@Sewinggold
4 жыл бұрын
Thank you Elizabeth!
@reginagraham6539
4 жыл бұрын
Awesome video! I appreciate your willingness in sharing your knowledge.
@Sewinggold
4 жыл бұрын
Not a problem. The more time I have, the more I will make.
@suelangford100
4 жыл бұрын
Thank you for your video, I'm new to my industrial walking feet machine and I've had a few issues. I'm particularly struggling with thread tensions top and bottom and find that the machine will sometimes `shread' the top thread till it breaks. The thread I'm using is extremely strong bonded thread and you've given me plenty of ideas on where to start trying to sort my issues out. Thank you
@edweirdmassey
3 жыл бұрын
I would suggest checking your needle for burrs or failing that your bobbin hook. Chances there is a burr somewhere
@petersiliekrause2203
3 жыл бұрын
That’s very helpful, no matter which machine you’re using 👍🏻
@skutovr
3 жыл бұрын
I’m contemplating purchasing this machine. Your video was very informative. Thank you 😊
@Sewinggold
3 жыл бұрын
We will have them back in stock sometime mid January. sewinggold.com/?s=1541s&post_type=product
@ashleydawn8821
9 ай бұрын
Thank you so much for this video! Just saved me a ton of trouble.
@leatherconfentionery9443
4 жыл бұрын
Thanks so much. Found out what I was doing wrong at the end, but it was worth it! thank you Leather Confectionery.
@Sewinggold
4 жыл бұрын
You are very welcome. I'm glad it helped you.
@debbybeachy7618
3 жыл бұрын
Thank you so much for this video. I watched and than went to my machine it's just like the one you're sewing on. Thanks again!
@Sewinggold
3 жыл бұрын
You are most welcome!
@shelbybaum4480
4 жыл бұрын
This video really helped me! Thank you very much, appreciate how you explain things.
@Sewinggold
4 жыл бұрын
You are welcome.
@purpletoo12
Жыл бұрын
I have a Thor 1541s and there are only a few videos that show what you do since mine is a copy of this Juki. Thank you for your videos.
@Sewinggold
Жыл бұрын
No problem.
@rebelrose7337
3 жыл бұрын
Awesome video!!! Thank you for sharing!!! This was soooo helpful!!! Solved my thread breaking issue!!!! I had the needle inserted wrong 😒 New DDL8700 owner. ☺️
@Sewinggold
3 жыл бұрын
Glad it helped!
@williamlegall2988
4 жыл бұрын
Really great info and video. Thank you Steve!
@Sewinggold
4 жыл бұрын
You are welcome William.
@bennyhalftail
4 жыл бұрын
thanks for taking the time to make this video, it was very helpful.
@Sewinggold
4 жыл бұрын
You're very welcome!
@stretch4960
4 жыл бұрын
I just did the backwards needle threading thing just before Christmas. I don't let things beat me. I must win. I sat and looked at it and I knew it had something to do with the bobbin or the needle. Took the bobbin out and it was fine. Finally threaded the needle like a book, left to right. Worked like a dream. The needle divit thing I did not know. Guess I have been lucky changing needles so far. That's a hoot because things don't work like that for me. Any way I appreciate your video. very helpful. Could you please fill a bobbin? I am not always sure I am doing that one correctly. Thanks. Happy New Year to you.
@ilaallen190
4 жыл бұрын
My machine is AWESOME and so are your videos!!
@Sewinggold
4 жыл бұрын
Thank you!!!
@darknessfierce4209
Ай бұрын
Love these videos
@tamarajones2009
2 жыл бұрын
Excellent video! Thank you!!
@SP-gf2ti
4 жыл бұрын
Hi! Thanks for your videos! They are really helpful. I am having tension issues with my Juki 1541s. I'm sewing on Naugahyde vinyl, backed by 1/4" scrim foam with a fabric backing and with a Bonded Nylon V92 thread and size 20 needle and no matter how much I adjust the tension knob or the bobbin case, I cannot get the tension correct. There continue to be some small loops on the bobbin thread, back of fabric. I have also had loops on the top of the fabric and bottom at the same time. With some adjusting, I can get the top tension to produce a straight stitch with no loops, but not the bottom. Do you have any suggestions about how I can fix this? Thank you.
@sharonjackson34
4 жыл бұрын
I am expecting my first 1541 Juki to be delivered in a few days and this video is priceless. Thank you so much for your time and explanation so very much. You have a new subscriber.
@Sewinggold
4 жыл бұрын
Awesome. Enjoy your new machine!
@chaurielle
4 жыл бұрын
This video helped me SO much! Thank you
@-nanabanana
3 жыл бұрын
Please keep talking! You're an awesome teacher👍👏
@Sewinggold
3 жыл бұрын
Thank you! 😃
@cyn4rest
Жыл бұрын
Fantastic video, Steve. Thank you sew much! Just got machine late yesterday- haven’t plugged it in yet. All this info VERY helpful. Thank you! I’ve subbed. 🧵
@Sewinggold
Жыл бұрын
Glad it was helpful!
@cindyadams9823
2 жыл бұрын
Thank you for these videos. ❤️ very helpful
@Sewinggold
2 жыл бұрын
You are so welcome!
@sosa4893
4 жыл бұрын
Excellent, Thorough Video.
@Sewinggold
4 жыл бұрын
Much appreciated!
@jwieberdink
3 жыл бұрын
I have two 1541’s delivered with the check spring positioned straight up. The tension on them was awful. I have loosened the screw and brought the spring down and they are sewing better but I still can’t get it perfect. I still see dots on the bottom. What can I do to fix the tension ? And did I do the right thing with the spring?
@julieblesener9027
4 жыл бұрын
this was very helpful! Thanks for these tips!
@Sewinggold
4 жыл бұрын
No problem.
@shailacrooks
4 жыл бұрын
I need help with my press foot with my Juki what do I need to do? It doesn’t move is. A Juki 1508 NH thank you
@helentrexler2570
4 жыл бұрын
Hey David I messed with the check spring and now I don’t know how to fix it any advice it is the 1541s
@danzar1729
4 жыл бұрын
Great video. Thank you.
@natali4677
4 ай бұрын
Good afternoon. Can you please advise what needs to be done to get the needle in the middle of the hole? Mine is on the left side. I have a Juki 1541
@BobMarley-ht6qo
Жыл бұрын
Hey steeve great video, when my machines presser foot raises it is a little squeeky? Any tips ? I have been oiling the machine regularly
@mpd4173
3 жыл бұрын
Do you now where I CAN PURCHASE THE rubber tire that is on the end of the bobbinwinder assembly on that machine? Thanks
@mw3designs
2 жыл бұрын
Great video! Any tips for adjusting machine so the knot isn’t showing on bottom of workpiece?
@kerenferrisandco
2 ай бұрын
If my bobbin with thread fall in the oil bucket, can I still use that thread?
@maryhutson55
2 жыл бұрын
Will the rubbing sound when you lift the pressure foot eventually go away or is this something we have to adjust yourself to???and if the checkspring does not click when you thread it, is there something off? My machine is brand new..thanks
@uldisozolins7111
4 ай бұрын
Hi can you use with 1541s 10 no. thread and up to 200 gauge needle?
@77fri
2 жыл бұрын
Is there a simple reason why my thread jumps out of the spring when sewing. I have an Artisan 618
@robertmccomb3113
2 жыл бұрын
Great video very informative. Could you please make a video in the bobbin winder adjustment. I've the same machine but the bobbin winder is erratic. Sometimes it winds normal. Other times the revolutions are very slow. I've tried to adjust by loosening the 3 screws but it's still not great. Thanks again for your video.
@ronmorrison744
2 жыл бұрын
Hello, i also have a juki 1541s , I am having trouble with thread fraying and breaking when i reverse , i am sewing 9oz to 11oz canvas 92 thread and 21 needle any thoughts???
@oldhollywoodbriar
4 жыл бұрын
Great job Steve!
@bethdeland8982
4 жыл бұрын
Thanks for the tips! I have the 8700 and am having problems with when I finish sewing, and pull the fabric out, the bobbin thread is doubled. I have the bobbin in clockwise and the stitching looks good. It's just annoying to have to jiggle the bobbin thread to get it loose.
@Sewinggold
4 жыл бұрын
Make sure the take up lever is all the way up when you are pulling the fabric out. That will allow the thread to pass the hook and avoid the 2 threads coming up through the bobbin area.
@scottiewhigham3431
3 жыл бұрын
Do you have any videos of resetting timing on a Juki 1541s?
@OnRappel
Жыл бұрын
I just bought a used 1541S. It's ten years old, but looks brand new. The only thing is the previous owner installed a tension plate from a 1508 on it. I'm not sure why, but I want to return it to its original configuration, but I'm missing the thread guide that goes on top of the tension plate. Do you know where I can source one of these? Also, I would like to get an original drain pan.
@patriciastatham6978
2 жыл бұрын
Steven if I got a synchrony and know any thing about it my 1541 is stuck it about needle position went try get needle in a down position that went problem begin please help
@Juanlreese
2 жыл бұрын
Hi Steve , my machine is skipping little bit at thick layered part, do you have any idea why?
@PegCoombes
4 жыл бұрын
Thank you so much I’m new to my 1541 machine and this was so helpful Mwah 💋
@Sewinggold
4 жыл бұрын
No problem.
@WallStreet749
4 жыл бұрын
Hey Peg do you know what's the difference between the 1541 and the 1541S?
@PegCoombes
4 жыл бұрын
Gary the S has a safety clutch
@WallStreet749
4 жыл бұрын
Thanks Peg weren't sure they also look a little different.
@SkywalkerWroc
5 ай бұрын
What to do if it's spitting oil on the fabric? I must have oiled it too generously, but now I don't know what to do about it.
@legionphalanx4143
5 ай бұрын
Does this apply to double needle machines?
@jaimesparkman5071
3 жыл бұрын
Thank you so very much!!
@Sewinggold
3 жыл бұрын
You watched a lot of our videos. Thank you Jaime!!!
@ronmorrison744
2 жыл бұрын
Hello i also have a DNU 1541S , i do a lot of sewing 9oz to 11oz canvas and when i reverse my 92 thread will fray and then break , can you tell me why you think this is happining
@jerrymeckna7607
4 жыл бұрын
Steve, I have a question, it's sunny juki 1541s. When are you sewing the knot will not stay centered in the leather. It will either move all the way to the bottom or all the way to the top. I've been sewing leather for over 10 years now and I've never had a problem like this and I've tried every remedy I can possibly think of LOL. Have you ever heard of this?
@saraana4614
3 жыл бұрын
Thank you for this excellent video, it helped very much
@Sewinggold
3 жыл бұрын
You're welcome!
@mchristofas
3 жыл бұрын
Steve, could you do a quick video on setting or adjusting the take up spring on the Juki 1541? My kid turned the knob. I sort of adjusted it but i know there must be a science behind proper adjustment. Thanks for the great videos!
@IBUILTTHAT
Ай бұрын
I have a 1541 and the stitches are all at an angle, they look like a line of slashes (see below), any thoughts? / / / / /
@patrickbarber4061
4 жыл бұрын
Bought a Juki machine from Steve unbelievable product line, super service if you have a problem or question they are there for you. Because of the quality of there company I purchase two more machines! Great company can’t say enough about them,do yourself a favor call Steve! Pat from Wisconsin.
@Sewinggold
4 жыл бұрын
It goes both ways Pat. It always help to have awesome customers like you. I greatly appreciate the business and support!
@Elvstar09
3 жыл бұрын
Perfect video! U helped me so much!
@Sewinggold
3 жыл бұрын
Happy I could help!
@angelalightning6718
Жыл бұрын
Bobbin thread getting tangled in bobbin spring, please help me
@asoadnan174
4 жыл бұрын
How long have you been using this model of JUKI? Do you recommend it? Great video by the way! Thanks a lot.
@davidellis251
2 жыл бұрын
My thread puller to the left of the tension disk springs up, not down. That might be the issue for my lines
@ejshelby5460
4 жыл бұрын
Very helpful!! My exact machine. Can you advise how to oil it?
@SubLike247
3 жыл бұрын
My 1541s get delivered today! 🧐🤩🤙
@escaman55
3 ай бұрын
Thank you 🙏🏻
@Sewinggold
3 ай бұрын
You are most welcome.
@sonialovesewing2396
3 жыл бұрын
Thank u for the important tips 👍
@Sewinggold
3 жыл бұрын
No problem 👍
@sonialovesewing2396
3 жыл бұрын
@@Sewinggold I am going to order this machine u. I will call today 🤗
@Hadd13
2 жыл бұрын
great video
@jjmore7964
7 ай бұрын
What could be the problem when string gets split in two
@KenethMontealegre
4 жыл бұрын
Hi steve I have a little question. I have a Gemsy straight stitch G8900B exactly like a juki DDL 8700 in appearance but my bobbin is slightly bigger. I am trying to sew scraps of lycra, stretch knits and light fabrics but it seems to skip stitches and really does a terrible job in just trying to do a stay stitch. I played with the tension, cleaned the machine, and i dont know what else to try. I also changed the needle to a new one but i still get the same problem. I am not sure if i will need a different kind of needle, i was trying to look for a video on your page but couldn’t find something. Thanks you so much for any help I would appreciate it.
@Sewinggold
4 жыл бұрын
I would try a ball point needle for starters. Unfortunately Lycra and other stretch materials are the hardest to sew. Sometimes we have to time a new machine to work specifically on stretch.
@kennethholifield1242
2 жыл бұрын
Steve watch the video a little to late Lol 😂 , got thread caught behind the take up spring a lease I thought so anyway long story short I lossen the spring now it will not do it’s job? Question do I need to take it to a professional Or can I adjust it? Or can you make a video on how to?
@jaramhe
4 ай бұрын
Can you make a smooth feeddog for Cowboy model 0797
@juangonzalez4376
Жыл бұрын
Hello there I enjoy your helpful videos and I’m wondering if you can do a video about the Juki 1341 vs the Juki ls 2342 I need to repair heavy duty fabrics thank you so much for your support
@Sewinggold
Жыл бұрын
I'm sorry, but I do not have an LS-2342 in my shop currently.
@lalsingh5835
Ай бұрын
That cut out is also called high speed groove....
@theclaytube2810
2 жыл бұрын
Overall very helpful. It would be nice if you edited it.
@melodyannduke1849
3 жыл бұрын
How do you know needle size to thread size
@angelasoto5438
4 жыл бұрын
My thread is knotting under what am I doing wrong
@daveedwards6567
Жыл бұрын
Thank you good video
@Sewinggold
Жыл бұрын
No problem.
@cherylwilson8974
4 жыл бұрын
really helpful video!
@Sewinggold
4 жыл бұрын
Glad you think so!
@albertwayenberg9140
Жыл бұрын
Keep in mind on a double needle machine the left needle indent goes left and the right needle indent goes to the right. Just FYI.
@ejshelby5460
4 жыл бұрын
Steve, can you comment on this: if I don’t give the machine enough “gas”, just tenderly press down, and when the material is thick/resistance to needle is high, the belt just spins by itself and making the friction noise, very troubling but I don’t think it’s wrong. How do you suggest I handle this? (If I gas it, I’m afraid I’ll lose control and it’d stitch too fast)
@Sewinggold
3 жыл бұрын
If the belt spins, that would tell me you belt is too loose. If the material is really dense, you will need a bit more speed/power to get through.
@maryellenkeskimaki4230
4 жыл бұрын
Great thoughts but needed to plan before starting the video (as he mentions at end).
@Sewinggold
4 жыл бұрын
Thank you for the comment.
@amybell4556
3 жыл бұрын
I’ve never used a industrial machine before. Do these machines take regular sewing needles? And what about thread? Is it thicker than a standard quilting thread?
@Sewinggold
3 жыл бұрын
Most industrial machines takes specific needles. They do not use a standard 15x1 household needle. This particular machine uses 135x16 and 135x17 class needles. The DNU-1541 series is sewn off with T70 thread which is thicker then quilting thread.
@janetblairfranco8311
3 жыл бұрын
this was great. can you do a video on breaking thread on this mschine
@fernsapanara6713
10 ай бұрын
I have a Juki 1541, I'm having problems with it not picking up the bobbin thread. It just doesn't sew. How do I fix this?
@Sewinggold
9 ай бұрын
Is you hook assembly moving when you turn the hand wheel?
@douglasthompson2740
4 жыл бұрын
Hello, I am wondering how you start a stitch with the thread hanging loose? When I do that I get a mess on the underside. Thanks for the video. (wish they had been around in the late nineties when I started sewing canvas. Almost no info for a beginner then. A few years in CD's started showing up for sale but this is so handy for people.)
@Sewinggold
4 жыл бұрын
Hold both threads and lay the first stitch by hand. I hope that answers your question.
@douglasthompson2740
4 жыл бұрын
@@Sewinggold That is what I always have done but sometimes it is cumbersome when sewing in the middle of a large piece. Also with large fingers. It would be nice to not need that extra hand when holding the work with my two as well. Thanks. Doug
@WallStreet749
4 жыл бұрын
What is the difference between the 1541 and the 1541S also are these machines ok sewing holsters?
@Sewinggold
4 жыл бұрын
The DNU-1541S has a saftey clutch. Thay can both sew holsters but only up to a point. It will depend how thick and dense the leather is. Also, the maximum size thread by the specifications is 138, but we have used 207.
@erinbelk2585
3 жыл бұрын
What causes the thread to twist down by the needle and eventually break?
@Sewinggold
3 жыл бұрын
Could be numerous things. Old thread or a needle too small for the thread size being used.
@lauria5040
4 жыл бұрын
This was helpful. Just bought this machine and learning how to use it. Sure would like to find the manual just in English to download. Any ideas?
@2WheelsGood.01
2 жыл бұрын
You can get the manual as a .PDF from Juki's website: www.cutsew.com/assets/images/Juki-1541-instruction.pdf
@debrasfischer409
4 жыл бұрын
Is this for just this brand of sewing machine for the needle...because on all the machines I’ve had the grove faces toward the sewer and the thread goes in from the front towards the back.
@brianprovorse4479
4 жыл бұрын
I've used MANY industrial machines and they are all this way. Your home machines are a bit different and the eye of the needle is facing you. But I do believe with those, the scarf of the needle (the notch) is supposed to be facing away from you.
@Sewinggold
4 жыл бұрын
For most machines that the bobbin case loads from the side, the needle faces left to right. That is on home and industrial machines. A lot of home machines have the bobbin case in front, so the needle would be front to back.
@debrasfischer409
4 жыл бұрын
Brian Provorse thank you for explaining that. I have never sewn on an industrial machine. I might like to have one someday.
@brianprovorse4479
4 жыл бұрын
@@debrasfischer409 I am planning to get my own very soon so I can make some extra money in the evenings. I do upholstery for my day job. Was looking at a lot of Juki's and Consew's. Think I am going to get the Consew 2206RB-14-7-DD.
@lydiaperez4193
4 жыл бұрын
Thanks for this video it is very helpful and how about if the top thread is not picking up the thread from the bobbin how do I fix it? Please help
Пікірлер: 185