Those flat ribbon cables are really easy to damage when refitting. I've had a number of problems caused by slight damage and not pushing them into socket quite far enough. I'm now MUCH more careful with them. Anyway, excellent work once again Dave.
@UHF43
2 жыл бұрын
They are a true nightmare. Sometimes, the socket is so tight you fear broking the ribbon if pushed too much, but it won't make good contact if not pushed enough. And there's a thin line between enough and too much.
@lesrogers7310
2 жыл бұрын
@@UHF43 Yes exactly.
@12voltvids
2 жыл бұрын
Yes they are horrible. Thank you Sony.
@wheatonna
8 ай бұрын
I'm working on a TD-709 which isn't too different, but more ribbons. I can't tell which end of them I'm supposed to pull on, or sometimes even which direction to pull (when they're at the edge of a PCB). Pretty frustrated too, knowing how delicate they can be. I'm grateful for this tutorial though: it answered several questions for me.
@brunoserwaczek5232
5 ай бұрын
“Holy crap!”seems to be a very useful expression when cleaning cassette decks!
@SergZak2023
2 жыл бұрын
Great work as always, Dave. Thanks for the quality content!
@SPINNINGMYWHEELS777
2 жыл бұрын
those are so user friendly to work on.. just fixed the exact same unit last night I bought yesterday from Greedwill for $5
@andy_rulz2000
2 жыл бұрын
I remember watching your repair video on the similar deck, it's how I first discovered your channel and I've enjoyed the content ever since. Keep up the great work.
@Astralify
2 жыл бұрын
This is a surprisingly well build deck (mechanism wise), especially for a dual well from the "plastic age". Sounds respectable too. Nice!
@walker55able
2 жыл бұрын
Great work i am a guitar player and never thought i could use my guitar tuner that way☺
@SergZak2023
2 жыл бұрын
The key is having a reference calibration tape with a known frequency (A=440Hz). The tape speed on the deck you're adjusting will only be as good as the reference tape's calibrated accuracy.
@12voltvids
2 жыл бұрын
Yes need tape with 440 tone as that is the "A" string. I record and sell many 440 tapes recorded on my certified quartz lock deck. Remember the 2 pioneer 1250 that played perfect speed on the tape. My quartz lock is also bang on as is my td v1010. I have a reference tape from Sony that i vereified my deck on that i record them with.
@38911bytefree
2 жыл бұрын
Nice job Dave. Love the tape deck vids.
@andynoon2584
2 жыл бұрын
Another excellent job done. What would we do without you.
@darinb.3273
2 жыл бұрын
I have a Pioneer dual deck with BLE (bias, level and Eq) tape calibration and it uses two alternating tones I don't know the frequencies of the tones though likely 400 and 10khz or somewhere around that it is a two header so just like the JVC it winds the tape back and uses the quality of the tones to adjust the BIAS and likely level and EQ too. The two machines I have don't blank the audio it uses to perform the calibration so if you listen you can hear the tones it you don't record on the tape after the calibration process completes. I have forgotten what the JVC calibration tones sound like I think it does two tones also but not alternating like the Pioneer. Low tone and then the high frequency tone afterwards. The JVC struggles because the head is badly worn and sometimes gives an error. I've searched for a replacement head to no avail. Oh well it is just for a hobby and fun to tinker with.
@12voltvids
2 жыл бұрын
Should be 400 and 7khz.
@darinb.3273
2 жыл бұрын
@@12voltvids Yeah, I just had a rough idea. I seem to remember three head decks use 400 Hz for the correct level setting for Dolby to work properly but I could be wrong I've never had a three head cassette deck before to know anything about them.
@12voltvids
2 жыл бұрын
@@darinb.3273 400 for level and 7khz for bias.
@darinb.3273
2 жыл бұрын
@@12voltvids Isn't it odd only 7k for BIAS. I have two different model Sony decks one is a TC-FX7 and the other is a TC-FX705. Setting the azimuth according to the service manual is supposed to be a 6K tone. Doesn't seem like that would be very precise to me but that's what the service manual shows (X Y mode on the scope). Go figure, I've always heard 9k up to 15k for azimuth alignment starting with the lower tones working up from there. I used a very time consuming method because I saw "test tape" comparisons from well known manufacturers that didn't agree with each other. I'll tell ya my method if you want to know.
@12voltvids
2 жыл бұрын
@@darinb.3273 i do it with x-y scope. 6k 7k will provide the same results. At the tv station i worked at engineers used 1khz. Said that was more than good enough, and they were doing r-r, cart, vtr and cassette.
@bryans8895
2 жыл бұрын
Awesome job! Your loose iron tip gives me some anxiety but man you got the job done.
@12voltvids
2 жыл бұрын
What do you expect. It is a Chinese iron. Need a new heater for my Weller. Problem is finding it.
@chairthrower
2 жыл бұрын
Neat video. I think the only difference between the TD-W317 and -318 is where they were sold (317 is US/Canada, 318 is everywhere else, but that includes 110/220 places so the voltages don't determine the part number). I have one of these with the A deck not playing, and from this video I can troubleshoot that the motor that lifts and spins the playback head isn't actuating for some reason. It looked like the one you had that wasn't working was doing the same thing--and I've noticed that when I try and reverse the playback head all the buttons stop working on both decks until I unplug it. I can't tell if you did anything to get it working other than removing the mechanism and operating the motor on a 5V power supply. I think I'm going in and removing the mechanism at this point to check it.
@JaypiTechPHOfficial
2 жыл бұрын
I remember this deck last year. Fortunately it works flawlessly on their deck mechanism. Only buttons malfunctioned due to it's age. So I replace them.
@ricardovibas7661
3 ай бұрын
Awesome job , I learned alot
@SPINNINGMYWHEELS777
2 жыл бұрын
azimuth on those machines - the left screw is for your forward playback - the right screw for your reverse.
@12voltvids
2 жыл бұрын
That's correct
@branhicks
2 жыл бұрын
Just last week I picked up a JVC TD-W709 and a TD-W207. What are the odds.
@PhantomLord24
2 жыл бұрын
Hello @12voltvids , i got a similar deck, the issue is that when i press Play, nothing happens, FF and Rew works ok, the belt its fine, without tape the play works, as soon i put any tape, looks like the torque its not enought to move a tape, do you have any sugestions? Thanks and greetings from Peru
@user-kx7xt1ch4r
2 жыл бұрын
Hi,l have a rail that has a good record and play back , but it does not erase the previous sound , l alos changed the sound head, it did not erase again the dvice model is gx630d _ ss
@Sans_Solo_
2 жыл бұрын
Sounds Good!
@paolorams767
2 жыл бұрын
Please, the name of the beautiful music at 31:55?????
@_A_343
2 жыл бұрын
Impressive as usual
@brunoserwaczek5232
5 ай бұрын
Dave, how often have you burned your fingers when soldering?
@12voltvids
5 ай бұрын
Only twice
@sabinms8538
Жыл бұрын
Hi this unit belt available anywhere i need it.
@directrix101
2 жыл бұрын
For a dual deck it’s not badly built, large flywheels and 3 motors. Auto calibration and pitch control as well. JVC was not much of a popular tape deck brand, probably they were underrated.
@12voltvids
2 жыл бұрын
6 motors! Remember there were many that did it with 1
@38911bytefree
2 жыл бұрын
I dont recall now if they were Alan Parsons of what other group, they carried a rack of JVC KD-A77s as part of the recording equipment during shows. They did fine machines, with DD, Quartz or FG Servo. Of course at the bottom of the line .... you cant exepct much from any brand. And for boomboxes they were able to offer 2 motor full logic starting on the M60 (it was a mid-line boombox ... nothing too exiting). Nothing bad for early 80s
@sunspot42
2 жыл бұрын
I remember eyeing several JVC decks in the mid to late ‘90s, though I never bought one. For awhile there it felt like they were making the best decks for the money. I guess they were putting all the cash they made off of VHS to good use.
@12voltvids
2 жыл бұрын
@@sunspot42 JVC had some extremely good decks. Better than nakamichi by quite a margin. I just pissed off all the nak fans but seriously they were not that good. Take a look in a tdv1010. It will blow your mind. (I have one)
@sunspot42
2 жыл бұрын
@@12voltvids Just watched a video of one. I remember looking at that deck.
@Luke-12V
2 жыл бұрын
hello sir, I wanted to ask, please, where to get the tape, for tuning, or how much Hz should be, thanks, on the recording 🤔🤔🤔
@12voltvids
2 жыл бұрын
I make them.
@terencekaye9948
2 жыл бұрын
@@12voltvids Do you sell them and if you do how can one go about purchasing one or 2 from you?
@12voltvids
2 жыл бұрын
@@terencekaye9948 yes i sell 440 and 3khz test tapes. My email is on the about page.
@zx8401ztv
2 жыл бұрын
Yep mucky switches, i havnt had one cause problems on my old deck but i've had ancient decks act up. Optical sensors do no better, dust n muck 😞
@SPINNINGMYWHEELS777
2 жыл бұрын
next to belts most common problem. they could have made them a bit more user accessible.
@zx8401ztv
2 жыл бұрын
@@SPINNINGMYWHEELS777 some of the old (non fancy) decks are simpler to access. If its full of bells and whistles, it's a mad house of parts lol. I also like 100% metal decks, plastic is crap (just my personal opinion).
@tedbell4416
2 жыл бұрын
I've got the 718 version of this one. Not sure what the difference is they look about the same.
@SPINNINGMYWHEELS777
2 жыл бұрын
there were many variations of these units.. it's confounding.
@UHF43
2 жыл бұрын
The base model had only one recording deck and no compu calibration, pitch control nor mic input. Yours have both decks recording plus all the above mentioned. The 318 is in between. Aesthetically, all of them look similar.
@tedbell4416
2 жыл бұрын
@@UHF43 you're right I looked both do record 👍
@michaelturner4457
2 жыл бұрын
I presume replacement pinch rollers aren't readily available for this JVC.
@38911bytefree
2 жыл бұрын
Well .... not son log ago we had a local supplier for belts and tires that provided pinch rollers for some of this decks, specially Technics. .... they bankrupted 3 years ago. The quality was really good, they exported to Mexico and had local representative there.
@12voltvids
2 жыл бұрын
I haven't been able to find anything but used or old stock and they are generally in bad shape due to being the same age.
@SPINNINGMYWHEELS777
2 жыл бұрын
you can get the rubber tire but not the whole assembly you have to remove to the old rubber and pop new one on.
@garyharris2812
2 жыл бұрын
Where do I get one of those tuning cassettes?
@12voltvids
2 жыл бұрын
I make them up and sell them. My record deck is quartz lock direct drive and gas been certified calibration.
@garyharris2812
2 жыл бұрын
@@12voltvids How do I order one?
@12voltvids
2 жыл бұрын
@@garyharris2812 send me an email. It's in the about tab on the main page.
@Luke-12V
2 жыл бұрын
Hi sir ,very nice
@SantoshYadav-et6ld
2 жыл бұрын
audio cassette Deck Sony techniqcs best deck who are you model number sir
@12voltvids
2 жыл бұрын
I have a Technics rsm275 and 2 older models, a teac v850, JVC tdv1010, a pioneer elite and about 20 more. Some have been seen on the channels others will be seen at some point.
@SDsailor7
2 жыл бұрын
I did not know they sold liquid deoxit.
@12voltvids
2 жыл бұрын
D100 is available as both 1 shot spray and squeeze bottle. Less waste this way.
@waynemarc77
2 жыл бұрын
#1... have you heard of a BURNISHING TOOL? #2...liquid DE OXIT on paper and run it through the contacts!
@12voltvids
2 жыл бұрын
Yes have done that before on other videos.
@jasonthejawman5442
2 жыл бұрын
The Same unit i have mine brought new
@theotherchannel2279
2 жыл бұрын
I never record tape to tape, I only prefer single tape decks.
@theotherchannel2279
2 жыл бұрын
I thought HX Pro was only for FM recordings from the radio?
@12voltvids
2 жыл бұрын
@@theotherchannel2279 No that is MPX filter. FM tuners without an internal MPX filter will pass the 19KHz pilot tone uses for stereo demodulation. This 19KHz tone beats with the bias oscillator and causes noise. HX pro was a system devoloped by Bang and Ouflsen that reduces the bias current when high frequency high level audio is being recorded. Think loud crashing cymbals. The high frequency sound will add to the bias signal and over drive the tape. So by reducing the bias the perfect recording is achieved. I know of one machine (I have it) that the HX Pro is switchable. That is the superb JVC TDV1010. One of the finest cassette decks ever made, and when it was new it had a price to go with the performance. Sold in Canada for 1299.00 back in 1989 when it was released. In the US it was about 800USD, which was a ton of money for a cassette deck. Today they go for more than they were new.
@jlucbmw3926
2 жыл бұрын
panne marantz pm54 km2 stk 3062 remplacé pas de puissance en sortie haut parleur
Пікірлер: 76