Man you are EASY the best iPad video creator for devs. If you wanted to take it to another lvl. You did. Thank you for the tutorial!!!
@x0rZ15t
2 жыл бұрын
Thank you so much for taking the time and making this video. Thanks to you I've now have a RPi4 that I can use on the go with my main laptop/tablet! Sweet setup!!!
@sfuoncall
2 жыл бұрын
Another comment, given Kali linux is meant to be a security tester platform. I would recommend changing the default password from kali to a more secure password. The reason being that you will most probably want to use the Wifi or hard wire to check out the network and therefore it is possible somebody to hack you while you are trying to hack them. :-)
@Shuttle_turtle
7 ай бұрын
I tried that thx
@HO-sx3nt
Жыл бұрын
Underrated channel ! Great work, seriously thanks👍
@keithchappell1200
Жыл бұрын
One potential gotcha ! - at 10:26 when you say avahi-autoipd needs internet access to be downloaded, if you are working on a clean kali system you will need to [sudo apt update] and [sudo apt upgrade] before [sudo apt install avahi-autipd]
@iounios_italia
2 жыл бұрын
Just brilliant. Love these videos. Thank you!
@wwrpntrn
Жыл бұрын
I must be missing a step, do I need to make specific ssh configurations to kali before making the jump to the iPad.
@tusharbhardwaj7511
4 күн бұрын
did you find any solution ? cause I did everything he told and exactly how he told. Everything went smooth until very last, when trying to use jump desktop it shows a prompt saying "please make sure tcp forwarding is enabled on the server". Can anyone help me over it please ?
@brandonsmith3216
Жыл бұрын
Love it! HUGE TIME SAVER FOR ME. Thanks!
@PaulShadwell
2 жыл бұрын
Brilliant, worked perfectly and now I have a real world use for my iPad/Pi setup. Despite the weird way you pronounce Kali ;-)
@tusharbhardwaj7511
4 күн бұрын
hey, I did everything he told and exactly how he told. Everything went smooth until very last, when trying to use jump desktop it shows a prompt saying "please make sure tcp forwarding is enabled on the server". Can you help me over it please ?
@nathandonkor7754
2 жыл бұрын
Where you have to install avahi, you can bring the usb0 interface up by typing “sudo ifconfig usb0 up”
@Alevaxx
Жыл бұрын
It's really great guide! Thank You so much
@doxcity
5 ай бұрын
Thank you so much for your tutorial
@iblackfeathers
2 жыл бұрын
thanks. we can build on top of this concept.
@igncodmyt6412
Жыл бұрын
How to view it in vnc viewer, localhost::5900?
@MrDmoney1984
2 жыл бұрын
Nice quality work on explaining, what would be the screen size for the 12.9 though
@RahndelDaVandal
2 жыл бұрын
Google says 2732X2048
@tech_craft
2 жыл бұрын
Full resolution is 2732x2048 for the 12.9 so you can set a fractional value if you want faster performance
@fdisnightwing2517
6 ай бұрын
Very well done videos. Is this same process for any OS on the Pi5?
@jonesing4fame922
2 жыл бұрын
Please, would a similar setup be possible with an iPad Pro's Lightening port? Thanks in advance!
@tech_craft
2 жыл бұрын
That's next up!
@tusharbhardwaj7511
4 күн бұрын
I did everything he told and exactly how he told. Everything went smooth until very last, when trying to use jump desktop it shows a prompt saying "please make sure tcp forwarding is enabled on the server". Can anyone help me over it please ?
@Designbyappleincalifornia
Жыл бұрын
Can't I use ipados when I need it to use these features? Is there a convenient way to change both operating systems quickly?
@Zippo_1234
2 жыл бұрын
I would love a setup guide for Raspberry Pi with android tablet
@KiRu-CH
6 ай бұрын
Great Work. Does this also work with a Rasp 5? I tried the same steps but it does not work. The usb doesnt come up as a network device
@Powergeek2011
2 жыл бұрын
Fantastic 👏👏👏 Thanks 👍🏻
@user-zo6wi2oh7j
Жыл бұрын
But then again I’m just wondering like where is the raspberry pi website at though that you said was in the description below though 😊
@nunomedia
Жыл бұрын
Thank you. I am having an error in the final step. When trying to connect via vnc it says: “could not create ssh tunnel. Please make sure tcp forwarding is enabled on the server”… Help
@The_Cyber_Punisher
Жыл бұрын
Yess im having the same error im not sure what to do
@nunomedia
Жыл бұрын
@@The_Cyber_Punisher I am planning to do all over again. If it works, I will let you know. Make sure to read the blog post.
@The_Cyber_Punisher
Жыл бұрын
@Caborusso which blog post?
@tech_craft
Жыл бұрын
This is the post I wrote to accompany the video: techcraft.co/videos/2022/5/mobile-kali-ipad-setup-with-raspberry-pi-4/ I haven't redone this setup since shooting the video so it's possible things might have changed. I'll find some time to take another look.
@nunomedia
Жыл бұрын
@@tech_craft please and thanks.
@zarrowa
2 жыл бұрын
Thanks a lot for this video, and all previous. I switched from carrying bulky laptop to iPad wit RPI. Did you try to replicate this setup on some x86 based portable boards? I thought of ordering ZIMA board and trying to replicate this setup.
@tech_craft
2 жыл бұрын
Khadas has kindly offered to end me a VIM4 so I'll be trying that one out next. I also have a Jetson lying around somewhere that I need to find the time to try.
@nochsoeinlouis5835
2 жыл бұрын
Have you gotten this to work on Arch Linux on the Raspberry Pi? I have been trying to do this for a couple of hours but I just cant get it to work.
@tusharbhardwaj7511
4 күн бұрын
did you get any solution ? I did everything he told and exactly how he told. Everything went smooth until very last, when trying to use jump desktop it shows a prompt saying "please make sure tcp forwarding is enabled on the server". Can anyone help me over it please ?
@ohhhkComputer
Жыл бұрын
Hi could you plz help with this error? -auth guess: failed for display=':0'
@igncodmyt6412
Жыл бұрын
Sir here’s the thing I’ve installed Kali Linux in my raspberry pi 4 and connected it to my tv using hdmi cable it’s working really good in the tv, but i want to use it in my iPad as well, after following all these steps will still be able to use it in my tv ! Please let me know sir ….
@shbfy
2 жыл бұрын
Awesome tutorial! Unfortunately at the end I seem to get a black screen when connecting to VNC via Jump. Anyone else got the same?
@tech_craft
2 жыл бұрын
Thanks! This can happen if HDMI hotplug isn't enabled/working. It's worth double-checking that step and/or restarting to make sure it took effect.
@shbfy
2 жыл бұрын
@@tech_craft looks like that did the trick. Thanks again! 🙏
@ThatGuyyyyy
2 ай бұрын
Is there a way I can run multiple OS in the raspberry pi? What’s the simplest solution? Can I just swap multiple Micro SD card? I just got raspberry pi 5 and installed raspberry pi os lite following your video with no GUI to be used for code server, but I also may want to try Kali Linux, Ubuntu, etc
@pgundlach1
Жыл бұрын
When I try to run the command ”ifconfig usb0” it doesn’t seem to run it as an ethernet interface. What am I doing wrong?
@tech_craft
Жыл бұрын
What’s the output of ifconfig? Does it list usb0 as an interface?
@The_Cyber_Punisher
Жыл бұрын
Im having a problem with the tcp forwarding in vnc it say: please make sure tcp forwarding is enabled on the server. Details: “Channel open failure (connect failed)”. Im not sure what to do
@Not-Cowboy
Жыл бұрын
I’m getting the same thing and came to the comments to look for answers
@SuperPoe
5 ай бұрын
@@Not-Cowboysame for me🥲
@tusharbhardwaj7511
4 күн бұрын
Hey did you get any solution? having same isse.. asking everyone I can find in this comment.
@tusharbhardwaj7511
4 күн бұрын
@@Not-Cowboy Hey did you get any solution? having same isse.. asking everyone I can find in this comment.
@DeadSecTheCyber-Punisher
4 күн бұрын
@@tusharbhardwaj7511how bro basically i just restarted the whole process again doing it cautiously this time and it worked
@Miamiyamoja
4 ай бұрын
Can this work on pi5 with inbuilt m2. nvme drive? I don't seems to get it working following your steps. I not sure is it due to the power usage or the pi5 usb c issue. Thanks.
@jiranav8719
6 ай бұрын
quick question, if i didnt use Jump Desktop. Any other option software recommended?
@igncodmyt6412
Жыл бұрын
Alternative for jump desktop
@tech_craft
Жыл бұрын
Any VNC app will do, Screens is another one I really like.
@dashcamdiariessa
2 жыл бұрын
You have my attention…
@ayushpriyadarshi4805
8 ай бұрын
Hi, I couldn't connect to the vnc through real vnc viewer as it is the free alternative to jump. but I simply couldn't connect. can you help me out with this? thank you!
@Miamiyamoja
3 ай бұрын
Unable to get my jump to display full screen with correct aspect ratio. It showing top and bottom black bar. I using HDMI dummy as x11vnc won't run headless on my pi5 kali linux.
@tusharbhardwaj7511
4 күн бұрын
it might beacuse of the bufferframe settings that were set using sudo nano /boot/config.txt
@ettraaugua4891
Жыл бұрын
I watched your ubuntu video as well very cool stuff. Im trying to get jump desktop to work for my local ubuntu lts computer. is it possible to do this over wifi or does it need to be a wired connection?
@tech_craft
Жыл бұрын
WiFi works fine, it’s not quite as smooth wired but it still works more than adequately
@ettraaugua4891
Жыл бұрын
@@tech_craft thanks for the reply. I did manage to get it working but found that i couldn’t use firefox or discord or another over the vnc connection. Is it possible to use those applications?
@siveryinapocket
2 жыл бұрын
Hi, I was wondering how long the iPad would last when the Pi is connected to it. Could you test this? I was planning to use this setup at school, but I was unsure about the battery impact, so this is important for me to know. Thank you
@tech_craft
2 жыл бұрын
It's a little dependent on what else you're running on the iPad and what brightness you have, but you can expect 2-3 hours quite reliably. You have a few options for powering both the iPad and the Pi at the same time: the Apple Magic Keyboard and a USB-C hub are the main two. I have a video coming up on this topic next week.
@siveryinapocket
2 жыл бұрын
Thank you!
@marksun7846
2 жыл бұрын
I use my raspberry pi 4b to program web things on my m1 iPad pro 12.9. My raspberry pi is 4G ram and with desktop version os. After turning off WLAN and Bluetooth on pi, I can feel some impact on battery life but it´s not significant. I can still use my iPad nonstop for half-day( not always connecting raspberry pi). OS without desktop interface may save more battery life probably. I think it highly depends on what is running on pi, and which pi you are using. Searching the current of every model raspberry pi in different CPU usage on google can help you calculate the power. I think most of the time it can't be worse than charging a phone on ipad (15w). Use 3B or 3B+ if you don't need powerful CPU. Turning off some useless io (like HDMI) can also help a bit.
@snoopy8870
Жыл бұрын
will it work for older generation ipads?
@mitsunorikawashiro9883
Жыл бұрын
I just did this method, but it's super slow, how can i fix that?
@s314noza
Жыл бұрын
Hi! Thanks for the video. I followed every step but my usb0 port is down anyway:( And my iPad does not show ethernet connections in the settings. I really want this setup to work, but I can't figure out what could be the reason of an issue
@tech_craft
Жыл бұрын
Is usb0 showing up in the list of interfaces?
@s314noza
Жыл бұрын
@@tech_craft yes
@AndresDeMoya
10 ай бұрын
@@s314noza same issue, did you ever resolve it?
@s314noza
10 ай бұрын
@@AndresDeMoya no man:( If you figure it out, please let me know how you did it!!!
@marcdalmaso8540
9 ай бұрын
hi guys, for those who had that issue, i believe you need to plug the ipad on the USB C of the raspberry( and not THE USB 3).Power is provided to the pi by the ipad.
@rafaeloledo
2 ай бұрын
sudo nano? where's vim
@MrPitikiti
10 ай бұрын
Does it work on ipad 2?
@Gideonblade
2 жыл бұрын
Thanks for posting great contents. I am using a Acasis USB C Hub with SSD enclosure. If I plug the Raspy into the hub, my iPad Pro shows 2 ethernet interfaces. One for the Raspy and the other from the Acasis. I can't seems to be able to connect to the Raspy via ssh if I am using Raspy with the Acasis. Only direct connection between the iPad Pro and Raspy works. Any work around solution?
@tech_craft
2 жыл бұрын
Which SSH client are you using? Are you able to ping the hostname for the Pi from the iPad?
@peterhampel2988
2 жыл бұрын
Thank you for the video! I have an issue with avahi-autoipd: Package avahi-autoipd is not available but is referred to by another package. Also I can not modify date and time for kali-OS. Thank you in advance
@tech_craft
2 жыл бұрын
You may need to run `sudo apt update` before being able to install `avahi-autoipd`. You'll also need to make sure you're connected to the Internet. When you're connected to the Internet if you run `sudo timedatectl set-ntp on` that should set the date and time based on your location.
@peterhampel2988
2 жыл бұрын
@@tech_craft thanks a lot
@Af113460
2 жыл бұрын
Seem to be getting a pretty laggy connection using this GUI method you mentioned at the end. I tried using the lowest quality settings but the response time is very bad :( any ideas on a fix?
@tech_craft
2 жыл бұрын
It’s very variable for me. To be honest, I treat the GUI as a fallback and try to do everything over SSH instead
@jimbagsh9569
2 жыл бұрын
This might be slightly off-topic, but would it be difficult to connect a 'Mac Mini' to the iPad (similiar to connecting a 'Pi' to the iPad)?
@jimbagsh9569
2 жыл бұрын
The reason I'm thinking of this is that I am a volunteer working in rural Nepal. I use my iPad Air a lot. So, I was thinking of using a 'Mac Mini' at my room where I have power (most of the time) and use the iPad Air as a monitor. Then when away from the room, I would use the iPad Air alone. Bringing a 'Mac Mini' would be easier to carry in my luggage - packing a monitor wouldn't be that easy - that's why I thought of the 'Pi' but since you it doesn't seem like you can buy a 'Pi' any time soon, I was looking for alternatives like the 'Mac Mini'/
@tech_craft
2 жыл бұрын
I think the best option for this setup is to use something like Sidecar to have the iPad act as a screen for the Mac Mini.
@traviswjavorsky
3 ай бұрын
Has anyone resolved the issue with TCP forwarding in jump desktop? I can SSH with blink but when I go to jump it fails to connect and states "Could not create ssh tunnel please make sure tcp forwarding is enabled on the server."
@tusharbhardwaj7511
4 күн бұрын
Hey! did you get any solution ?? I'm having same problem and its been hours since I'm trying to solve it but still I'm unable to do so. Can you help please?
@sfuoncall
2 жыл бұрын
Uh. I hate to mention this. But you forgot to add the link to the Ubuntu video at time mark 5:17.
@tech_craft
2 жыл бұрын
Good spot! Fixed.
@SkyPunkki
2 жыл бұрын
hello i tried this configuration with m1 ipad pro and raspb pi 4 8gb and sharing the screen with jump is really slow.. following all the stop... this can mean i did something wrong ?
@tech_craft
2 жыл бұрын
A few options to test: 1. Have you got a good quality USB-C cable? 2. What resolution are you using for the screen? You might try reducing it? 3. What colour depth/quality have you set in Jump? I find that the highest setting is very slow
@SkyPunkki
2 жыл бұрын
@@tech_craft 1) I bough the anker usb cable you recommended 2) the resolution same as your since I have 11 inch iPad Pro m1 yes I’m using high but I tried low and the difference is almost none. When I’m running ssh is working perfectly but when I use jump is so laggy that I can not even use chrome and sometimes after be doing stuff when I open jump I just get a black screen and I have to reboot the raspberry pi because the interface is not working anymore, also I over clock it because I bough a case with a fan to make it run to 2k gz and gpu to 750 and it is still lagging
@tech_craft
2 жыл бұрын
I'll have an explore with my setup and see if I can reproduce this - nothing immediately comes to mind.
@peterhampel2988
2 жыл бұрын
I also have a very tough behavior of the OS. videos on youtube cannot be viewed without stuttering. However, I use an ipad pro 11" 2018 and raspberry pi4 4GB. I will also try it on my ipad pro M1 and a raspberry 400. I also swapped the usb c cable and didn't feel any improvement. The SD card is a sandisk 32GB extreme . Do you have another idea? it's not fun to work with. Many Thanks
@peterhampel2988
2 жыл бұрын
I have checked the 12,9" M1 iPad with Pi400 with same result. The Pi400 connected to the display is working fine. after setting up and connecting to the iPad the system does not work smoothly. It would be good to know what else to test. thank you in advance
@igncodmyt6412
Жыл бұрын
What is the app used to Connect the server and view Kali on iPad? Please let me know !
@tech_craft
Жыл бұрын
It’s Jump Desktop.
@igncodmyt6412
Жыл бұрын
@@tech_craft sir after running $ :- sudo systemctl enable vncserver I’m getting something like this : The unit file have no installation config, this means they are not meant to be enabled using systemct….
@igncodmyt6412
Жыл бұрын
@@tech_craft but the systemctl has Install section 😢 please clear this out for me
@ZalmanLew
2 жыл бұрын
the link to the website article is returning a 404
@siveryinapocket
2 жыл бұрын
Yes. Same for me
@farzadmf
2 жыл бұрын
+1
@tech_craft
2 жыл бұрын
Apologies. I forgot to press the button to make the page live. All fixed now.
@yuukichan3065
2 жыл бұрын
Is there an alternative method for Raspberry Pi 3 by any chance?
@tech_craft
2 жыл бұрын
Certainly. I show a bunch of non-Pi4 options in this video: kzitem.info/news/bejne/xHppsIJue3qgpn4
@coconuterror8914
Жыл бұрын
Would this work with a Raspberry Pi 3B V1.2 w/ iPad Air 5?
@tech_craft
Жыл бұрын
I have a video discussing all the options for different tablets and Pis here: kzitem.info/news/bejne/xHppsIJue3qgpn4
@murdur8314
Жыл бұрын
Hey Tech Craft, I followed your steps but get the error "Could not create SSH tunnel" - Please make sure tcp forwarding is enabled on the server. Details: "channel open failure (connection failed)
@murdur8314
Жыл бұрын
Got it to work, not sure what i did wrong, but i fixed it by redoing all the steps, format sd card and image Kali again with Rpi imager.. seems to work now
@murdur8314
Жыл бұрын
😢 so it broke again when I did an apt upgrade and update so not sure what’s going on
@michaelventarola7100
2 жыл бұрын
Question. I followed your instructions, but my usb0 does not have an IP address. Anything I should double check on?
@tech_craft
2 жыл бұрын
Double check that the Pi and iPad are connected and then reboot the Pi. If that's not working but you see usb0 then I'd double check that the /etc/network/interfaces.d/usb0 file is correct.
@michaelventarola7100
2 жыл бұрын
@@tech_craft I do have a IP address but the PI cannot connect to the internet
@tech_craft
2 жыл бұрын
Right, understood. In this setup, the Pi does not get Internet connectivity from the iPad. You can connect the Pi to the same WiFi as the iPad or if you have a cellular iPad to the hotspot on that iPad.
@alexandersullivan2262
2 жыл бұрын
unfortunately when I try to install the avahi daemon and x11vnc apt fails to find the packages. Perhaps this is because Kali is now on the 2022.3 image rather than the 2022.2 image like shown in the video. I cant seem to find the 2022.2 raspberry pi image anywhere online at the moment.
@alexandersullivan2262
2 жыл бұрын
If you are having the same problem I was try doing `sudo apt update`. Then you should be able to install the correct packages with apt.
@tiagoprnl
2 жыл бұрын
Would this setup work with a new iPad Mini?
@tech_craft
2 жыл бұрын
Absolutely. Works really well with the USB-C mini.
@virgiliorodriguez7672
Жыл бұрын
I keep getting stuck at avahi step and I have internet and still it doesn’t work.
@tech_craft
Жыл бұрын
Do you get any error messages?
@nicotralau1821
Жыл бұрын
Run „sudo apt-get update“ first, had the same problem
@mpsii
2 жыл бұрын
How do you get the files to show when trying to tab complete?
@tech_craft
2 жыл бұрын
That seemed to work out of the box on Kali for me.
@Not-Cowboy
Жыл бұрын
I am getting an error when I try to launch VNC from jumpdesktop “please make sure tcp forwarding is enabled on the server. Details (channel open failure, connection failed)”. I also tried to manually run x11vnc with the commands specified in the van server.service file and got this message --- x11vnc loop: 11 --- --- x11vnc loop: waiting for: 13418 30/07/2023 05:09:44 passing arg to libvncserver: -rfbauth 30/07/2023 05:09:44 passing arg to libvncserver: /etc/vncserver.pass 30/07/2023 05:09:44 passing arg to libvncserver: -rfbport 30/07/2023 05:09:44 passing arg to libvncserver: 5900 30/07/2023 05:09:44 x11vnc version: 0.9.16 lastmod: 2019-01-05 pid: 13418 30/07/2023 05:09:44 -auth guess: failed for display=':0 any help would be appreciated :)
@Not-Cowboy
Жыл бұрын
Also seeing this in the systemctl status vncserver output 30/07/2023 05:22:20 -auth guess: failed for display=':0' --- x11vnc loop: sleeping 2000 ms --- --- x11vnc loop: 638 --- --- x11vnc loop: waiting for: 11319 30/07/2023 05:22:23 passing arg to libvncserver: -rfbauth 30/07/2023 05:22:23 passing arg to libvncserver: /etc/vncserver.pass 30/07/2023 05:22:23 passing arg to libvncserver: -rfbport 30/07/2023 05:22:23 passing arg to libvncserver: 5900 30/07/2023 05:22:23 x11vnc version: 0.9.16 lastmod: 2019-01-05 pid: 11319 xauth: unable to generate an authority file name
@k7b754
2 жыл бұрын
Are we downloading and installing from the Ipad?
@tech_craft
2 жыл бұрын
I haven't found a way to do that yet.
@impermanenthuman8427
Жыл бұрын
Why not just live boot into a surface pro? Or install it onto a SSD, the SSD’s are very easy to swap in and out, wouldn’t a Surface Pro give better software and peripheral compatibility using Windows plus direct linux installation? Plus later when Apple no longer updates the iPad making it virtually useless you can still use a light linux distro on your old surface and use it as a netbook? 🤔
@tech_craft
Жыл бұрын
I did try that for a while, but this was just about the time that WSL2 was still in beta and Linux support for the SP wasn't there yet. I keep meaning to revisit this now that the linux-surface project seems to really be moving.
@Powergeek2011
2 жыл бұрын
I have an issue with the last step. When trying to connect via ssh I have an error message "Channel open failure (connect failed)3" - PROBLEM SOLVED, SEE BELOW.
@Powergeek2011
2 жыл бұрын
OK. There is an error on your website guide to activate vncserver. You wrote sudo systemd start vncserver && sudo systemd enable vncserver instead of systemctl.
@tech_craft
2 жыл бұрын
Will fix that right away! Good spot
@nunomedia
Жыл бұрын
Got the same error, used systemclt but still the issue.
@mir_you_tube
Жыл бұрын
Hi, is it works with IPad 1st Gen?
@tech_craft
Жыл бұрын
I don't know for certain. If there's a compatible VNC app in the App Store, then you shouldn't have much of a problem.
@avihayl7911
2 жыл бұрын
can you do a video using Samsung S8 tablet? it seems like android offers a far superior OS which let's you use application such as termux to run various Linux related tools written in bash or python without the need for a rasp... also you can use Google rdp client to connect to a laptop to do some heavy lifting around windows or even ssh to a cloud machine costing around 6-15 dollars a month.
@tech_craft
2 жыл бұрын
I took my S8 away for a week of work just last week. Video report coming soon!
@tiagoprnl
2 жыл бұрын
@@tech_craft I would be interested to know if the setup on this video is possible using a raspberry with a Samsung Tablet (S8 e.g.). Another question... is it possible to share the wi-fi/4G connection of the tablet with the raspberry? Thanks in advance.
@philippmb
2 жыл бұрын
there comes an error message saying something about tcp fowarding "channel open failure (connect faied)" when using jump desktop to get into the raspi
@tech_craft
2 жыл бұрын
Do the logs for VNC say anything? This sounds like the VNC server crashed.
@philippmb
2 жыл бұрын
@@tech_craft oh you are right didnt start properly for some reason thank you
@nunomedia
Жыл бұрын
What’s was the solution? Ssh tunnel
@philippmb
Жыл бұрын
@@nunomedia just had to restart the VNC Server on the raspi i think
@nunomedia
Жыл бұрын
@@philippmb thanks but it did not work for me yet.
@sanketparekh9306
2 жыл бұрын
how does the internet access work? can we do wireless setup?
@tech_craft
2 жыл бұрын
Sadly no sharing of the Internet connection with the Pi over the USB-C. If your iPad is cellular you can tether the Pi to it. You can install RaspAp on your Pi for a fully wireless setup but that requires an extra WiFi adapter in the Pi. I haven't used this setup for a few years so I'm not up-to-date on the instructions.
@sanketparekh9306
2 жыл бұрын
@@tech_craft Appreciate the reply. I saw old video of yours that explains it. but I could not figure it out on RaspAP new interface.
@tech_craft
2 жыл бұрын
Yeah. That setup is no longer supported by the RaspAp team. I have a mini USB wifi adapter sitting on my desk to try out their supported setup. I'll put out a video on that when I can.
@sanketparekh9306
2 жыл бұрын
@@tech_craft Truly appreciate.
@x1dragon102
2 жыл бұрын
i cant get it to work with vnc veiwer
@tech_craft
2 жыл бұрын
Does VNC viewer support opening an SSH tunnel?
@x1dragon102
2 жыл бұрын
I managed to make it work
@user-zo6wi2oh7j
Жыл бұрын
But then again I’m using an iPad 10th generation
@thewayofbiutze3899
2 ай бұрын
💪💪💪🙏🙏🙏🙏🙏🙏🙏
@enderhttp3472
2 жыл бұрын
came here when the video had 4 views, also i think im first but idc
@jeffholyoak2722
2 жыл бұрын
Failed to start vncserver.service: Unit vncserver.service has a bad unit file setting. See system logs and "systemctl status vncserver.service' for det ails. Grumble grumble. Advise?
@tech_craft
2 жыл бұрын
Could be a few things. What do the logs say?
@benferguson223
3 ай бұрын
Please help with the setup for a pi 5 on ipad. I get stopped at sudo cp /etc/network/interfaces.d/eth0 /etc/network/interfaces.d/usb0 it says that these files don't exist
@benferguson223
3 ай бұрын
I just used touch /etc/network/interfaces.d/usb0 to make the file and edited that. but my 'sudo ifup usb0' doesn't work, I get back unknown or no adress type and no inherits keyword specified, unknown interface usb0. I have the avahi-autoipd installed. Please help! just need to fix this last step.
@benferguson223
3 ай бұрын
another side note, if I do "ip a" usb0 shows up but it does not have the ip address
@flokibyarian6832
7 күн бұрын
I just did sudo apt update then sudo apt upgrade and then it worked
@flokibyarian6832
7 күн бұрын
I think „sudo apt-get -y install avahi-autoipd“ would also work
Пікірлер: 172