Mrs coco and me had a laugh filming,who needs instructions. But anyways got there in the end 😂
@vwcoco
2 ай бұрын
So 8.5 out of 10 quite heavy but of kit and not recommended for car body filler for the fine brush so 80 or 60 grit would help .Who looks at instructions ? 😂 we had a laugh but seriously wear gloves ,mask and glasses but upto user . That T piece aluminium handle that’s in the packet is an extension for handle. Left or right hand use . Thanks for watching and your support !!
@stephenallard4578
2 ай бұрын
i agree get some 40 or 60 grit and see how it does on multi layers of paint. crack on friend
@vwcoco
2 ай бұрын
Thanks stephen
@kimberlywilliams9757
2 ай бұрын
That one is a bit different than mine. My drum is centered and has a grab handle in the middle above the drum which makes it easy to handle. A little tip, dont hold it too long in one spot bc it will create "dips" in the material you are sanding. I found that out the hard way! 😅 When you get used to using it you will see that it's a very useful tool! 😁👍
@vwcoco
2 ай бұрын
Yeah I’ve an extension for the handle . It was that t piece I’ll check it out again tomorrow . Very happy with it thanks kimberly
@vwcoco
2 ай бұрын
Good advice 👍
@shanecook5979
2 ай бұрын
Quite handy and it saves time and labor.Happy finishing.
@vwcoco
2 ай бұрын
Yeah it will ,I’ll get a couple other grades
@donaldhalls2189
2 ай бұрын
Handy little tool, thanks for sharing, all the best to you and your loved ones
I I always watch the ads on your channel to support your channel, I hope it helps you out! 😊
@vwcoco
2 ай бұрын
Big time thank you 👍
@kimberlywilliams9757
2 ай бұрын
@@vwcoco You're very welcome! 😊
@vwcoco
2 ай бұрын
@@kimberlywilliams9757 👍
@vwcoco
2 ай бұрын
@@kimberlywilliams9757 we had a laugh tho that’s the main thing . Enjoy
@kimberlywilliams9757
2 ай бұрын
@@vwcoco Yes, looks to be a funny time that you can look back on and laugh! 😂
@ROLANDO72510
2 ай бұрын
COOL TOOL , i wonder if it works on wood i have a wooden deck that i have to sand it every 5 years to paint, i sure will try it
@vwcoco
2 ай бұрын
I just had a look and yeah wood ,plastics etc thanks Roland
@pstreetgarage7304
2 ай бұрын
Serms like a good tool. Might be good on the side panels of a bay window bus.
@vwcoco
2 ай бұрын
Awesome tool ideal for bay windows as flatter and bigger panels
@jarnosaarinen4583
2 ай бұрын
Now, Yuh just need it to do it by it's self! lol Come back tomorrow & it's done!!
@vwcoco
2 ай бұрын
👍 lol
@franksgarage8551
2 ай бұрын
I agree with @danobrien3109. Watch around edges with the wire wheel on it. Will peel it up at the same time pulling out of your hands and launching the workpiece…this i know.
@vwcoco
2 ай бұрын
Ok cheers
@craigtaylor2953
2 ай бұрын
The best process is to read instructions first that's for sure LOL 😆 😂 😅 😄
@vwcoco
2 ай бұрын
😂 what are they
@craigtaylor2953
2 ай бұрын
On multiple layers of paint I use 40 grit .
@vwcoco
2 ай бұрын
Thanks I just got a 60 grit 👍
@davidsolloway9349
2 ай бұрын
like 3 !
@vwcoco
2 ай бұрын
Cheers david
@shanecook5979
2 ай бұрын
That tool will eventually become 2nd nature.Hang in there.
@vwcoco
2 ай бұрын
I hope so 👍 cheers Shane
@lawrenwimberly7311
2 ай бұрын
Great laugh when the thing fell off LOL
@vwcoco
2 ай бұрын
😂
@lawrenwimberly7311
2 ай бұрын
better to take several passes than to stay in one place too long... heat buildup can warp the panels
@vwcoco
2 ай бұрын
Yes sir noted !!
@danobrien3109
2 ай бұрын
They are a great tool when properly designed. Yours is not properly designed. The wheel will be very unforgiving if your hand slips. Handle should be over top of the body. This design looks awkward to maneuver. 👍👍🇨🇦
@vwcoco
2 ай бұрын
The t handle in kit is to alter the handle to proper position ,I noticed afterwards 😂
@ROLANDO72510
2 ай бұрын
COOL TOOL , i wonder if it works on wood i have a wooden deck that i have to sand it every 5 years to paint, i sure will try it
Пікірлер: 47