Thanks for sharing. Just got the same bike and will be setting it up this winter.
@JDSFLA
Жыл бұрын
Have the 2008 ABS model. I replaced the very uncomfortable seat with a Corbin, and recently got a tune that smooths out the throttle plus some more power. Also went with a 190/55/ZR17 rear tire from the original 50 profile. The 55 improves the handling.
@cristiantamasila8667
8 ай бұрын
What tune model did you use?I have the 2009 model?
@dcstrng1
Жыл бұрын
Have an '09 and enjoyed your upgrades... Hadn't thought about putting drop pegs on the T-Rex, but can weld, so may follow suit -- have BMS (former Rocky Mayer, now Adrian) building me a saddle -- hopefully it will be as good as they've done for me previously -- also they could give me a completion date sooner than Day-Long... I've seen folks mounting road-lights below the mirrors, but I think the T-Rex bars are a better placement, so may mimic your suggestion there as well -- good summation; thanks for posting !!
@rossworkman371
Жыл бұрын
Nice set up. I just bought an 08 with 5k miles.
@bradstevenson7765
Жыл бұрын
You beat my record. I just got my 08 with 9k
@crazynewman
6 ай бұрын
What brand is that mater cylinder reservoir lid ?
@user-im7om3by4r
7 ай бұрын
Сиденье шикарное. Но вот зачем ты сделал мотоцикл ниже? У него и так катастрофически низкий клиренс, что я несколько раз уже цеплял глушителем о камни.
@aLargeKawasaki
4 ай бұрын
@Fatboydishman Hey really nice bike and great video! I picked up the T-Rex crash bars and the Heli-bars 2" risers for my 2009 C14. Mine already has 2" risers, and after watching this I decided to double them up like you did, since we're both stuck with the older C14s. What I'm wondering about is what were the length of the bolts that you used? Could you share the length of those when you have some time, please? Thanks!
@bcbragg705
3 ай бұрын
I had the same question. I already had the 2”. I ordered another set of 2” risers and the 1/2” rear setback. So I am figuring I will need M8 1.25 pitch 140mm. They aren’t McMaster carr. You need 130mm length according to my calculations
@aLargeKawasaki
3 ай бұрын
@@bcbragg705 Thanks so much for sharing, I'll be putting an order in soon so I can get these bolted up. Really appreciate it
@bcbragg705
3 ай бұрын
Actually hex socket M8 x 120
@elfeo1js
Жыл бұрын
How much did this add up to
@spencerpierson2267
Жыл бұрын
Do you need to get extra long bolts for the handle bar riser when you stack them like this? Would love that setup just wondering what I need
@Fatboydishman
Жыл бұрын
Yes. Stainless steel and longer.
@cristiantamasila8667
8 ай бұрын
@@Fatboydishman It's the first time I see this setting on the risers. I'm glad🙂 I bought a set of 2" straight ones because everyone told me that the cables won't last longer! So I can order besides the straight ones 2”(5cm),the offset ones 2”(5cm) total 4” riders(10cm)? From Advance Sport Touring model offset?
@cristiantamasila8667
8 ай бұрын
@@FatboydishmanThe footpegs ebay version from China,it s strong?I m 340lb and i need to suport my weight stand up.
@muthannaelzobidi9291
11 ай бұрын
Please could you send me the link for the seat or the name thanks regards
@Fatboydishman
11 ай бұрын
Russel Day Long sear or RDL
@muthannaelzobidi9291
4 ай бұрын
I can’t find nothing for that crush guard I need the link please
@NEPA_independent
Жыл бұрын
I have a set of risers, but haven’t found a set of pull back. Where did you find your?
@Fatboydishman
Жыл бұрын
Ebay
@cristiantamasila8667
7 ай бұрын
@@FatboydishmanThe footpegs ebay version from china they have a central hole of 0.8mm and the original ones 12mm. Did you enlarge the bolt hole?Thanks
@cristiantamasila8667
6 ай бұрын
@@FatboydishmanThe footpegs ebay version from china they have a central hole of 0.8mm and the original ones 12mm. Did you enlarge the bolt hole?Thanks
@Fatboydishman
6 ай бұрын
@@cristiantamasila8667 no, I did not have should be fine
Пікірлер: 28