Great video. I’m finding the wiring slack on the top side of throttle grip to be quite annoying catching my finger, planning to redo that side to route slack on bottom. Also, I was able to mount on my 15 Versys with only removing the one panel next to the tank. A snug fit but worked.
@jaumebeltran524
2 жыл бұрын
Thank you Andy, cheers from Spain.... missing a garage like yours🤔
@Heyalth
2 жыл бұрын
Did this job on mine last weekend. It's possible and honestly pretty easy to just feed the wires up along the neck and through the brackets so you don't need to remove the front fairing. It took me about an hour and I only needed to remove the seat and the two left side panels.
@dmitryutolstyu3736
2 жыл бұрын
Thank you very much for the great videos. I watch you from Russia))) 😃
@PAUL-yv2kk
2 жыл бұрын
That's the trouble with you Andy, never take the time to do it right 😜. Awesome as always - Cheers from UK. If you have the time it'd be great to hear how they perform.... im amazed you've gotten away without them till now. I've got Oxfords Touring grips on my V1K and to be fair a bit disappointed. Absolutely brilliant on my previous VFR 800, but same type on the Versys seem uneven left to right and fluctuate up and down like hell. Maybe not well matched to the V1K electrical system and maybe I'll swap em out if the OEMs run on rails. Thanks again Andy 👍
@MotoAndy
2 жыл бұрын
Paul this video is from two years ago, I had to re-upload due to a technical problem with it . So I have been using the heated grips for two years now and I am happy with it, they work flawlessly.
@PAUL-yv2kk
2 жыл бұрын
@@MotoAndy damn this Alzheimers 😆. Thought it all seemed a bit familiar ! Anyway great that they work well. Now let's see this Honda on the road 👍
@Maison-gb6dv
2 жыл бұрын
Thank you so much ! I'll try... I have exactly the same bike as you.
@bobbyjoesugar
Жыл бұрын
Hey- do these heated grips only hear one side or they heat all the way around the grip?
@MotoAndy
Жыл бұрын
All the way around
@bobbyjoesugar
Жыл бұрын
@@MotoAndy good to know- something is wrong with mine then sadly
@40mosher
10 күн бұрын
Are you aware of you can wire Oxford Grips to the factory harness?
@MotoAndy
10 күн бұрын
@@40mosher I have no idea my friend, sorry...
@uwmxer
Жыл бұрын
Am I seeing things or does it say HONDA on the back of the control module at 1:45? I need to do this upgrade for mine, but it looks like a royal pain!
@MotoAndy
Жыл бұрын
your eyesight is OK, after all, every kawasaki has a honda in it ;-)
@tobycatron2103
4 ай бұрын
I just ordered for a KLR and mine says Honda as well
@allanfigueiredo
2 жыл бұрын
Nice video! Thanks for doing that. What glue did you used ?
@MotoAndy
2 жыл бұрын
Grip glue by RENTAL. slavensracing.com/shop/grip-glue-by-renthal/
@allanfigueiredo
2 жыл бұрын
@@MotoAndy Thanks!
@VersysSE
2 жыл бұрын
Hej Myślałem,że miałeś oryginalne:) Uważałeś z klejem?Ja swoimi przy nakładaniu na kierownicę wycisnąłem klej i pociekł na osłonę zbiornika-nowa naklejka popsuła mi humor:(
@MotoAndy
2 жыл бұрын
Miałem i nadal mam, to jest video z przed 2 lat, musiałem jeszcze raz przesłać z powodu problemów technicznych z filmem.
@marianodemartinelli4681
Ай бұрын
Si, hace tiempo be pro wielder and eléctrician? Useless vid
@MotoAndy
Ай бұрын
Thank you for your statement, like you said, you're none of those.
Пікірлер: 23