2020 Kawasaki J300 motorcycle seen from outside and inside. The vehicle has liquid cooled, SOHC, 4-valve, 299 ccm, 20.3 kW (28 PS) at 8,000 rpm engine. Max torque 28.4 Nm (2.9 kgf*m) at 6,500 rpm. Compression ratio 10.8:1. Bore x Stroke 72.7 x 72.0 mm. Forced lubrication, wet sump. Fuel injection Ø34 mm x 1. Fuel consumption is 3.6 l/100 km. Carbon dioxide emissions of 84 g/km. Transmission is CVT with centrifugal clutch. Final drive by belt. Tubular diamond, steel frame. Trail 113 mm. Wheel travel front 110 mm. Wheel travel rear 100 mm. Front tyre is 120/80-14 M/C 585. Rear tyre is 150/70-13 M/C 645. Length 2,235 mm. Width 775 mm. Height 1,260 mm. Wheelbase 1,555 mm. Ground clearance 145 mm. Fuel tank 13 liters. Seat height 775 mm. Curb mass 191 kg. Front brake is single 260 mm petal disc, dual piston caliper. Rear brake is single 240 mm petal disc, dual piston caliper. Front suspension is 37 mm telescopic fork. Rear suspension is twin shocks with 5-way adjustable preload.
The motorcycle was presented at EICMA 2019 - (Esposizione Internazionale Ciclo Motociclo e Accessori) - Milan, Italy, 7-10 November 2019.
Негізгі бет Автокөліктер мен көлік құралдары Kawasaki J300 (2020) Exterior and Interior
Пікірлер: 38