I’m guessing you never made another video after this. Nice safety glasses. Nothing like losing an eye
@jameslester3861
6 ай бұрын
I installed one of these one my 2016 4010 about five years ago. I used step drills to drill holes in bed. One of the best accessories I installed. It's slow compaired to JD and Kubota but works very well. Remove your bed hold down latches. You don't need 'em and If the bed gets latched down you will be blowing fuses or breaking something.
@hopelessnerd6677
2 жыл бұрын
Pretty cool mod. A nice way to get rid of unwanted passengers, too. I applaud you for not having an ear-splitting rock concert behind your video, too!
@mystuffedgarage9907
2 жыл бұрын
I’ve been able to haul so much more and it’s a plus that I’ve needed zero help to unload my loads. Thanks again for taking the time to leave a comment!!
@kjyukon
Жыл бұрын
Just finished installing mine, the video was good for some guidance. Kawasaki said made for the fxt and lift weight is 1000 lbs
@6x47...
2 жыл бұрын
This channel is eventually gonna be promoted to "my stuffed warehouse" 👏
@mystuffedgarage9907
2 жыл бұрын
I think your on to something. Wanna team Up?
@6x47...
2 жыл бұрын
@@mystuffedgarage9907 whhhhoooaaaaa!!! Surely 👍
@LarryFromHouston
3 ай бұрын
I have a kubota with a dump bed and it's way faster, buying a mile and going to add this feature. Wish the switch was on the dash, but that's what wrote and splices for. Thanks for sharing.
@marcoscorrea6637
2 жыл бұрын
Thank you so much,this video was very helpful.God bless you and your family.
@mystuffedgarage9907
2 жыл бұрын
Thank you for taking the time to leave a comment.
@nhmaze
Жыл бұрын
I recomend using a jack stand so you can continue making videos. Thanks for the good info!
@dream2money77
Жыл бұрын
Touché!!!
@jamesharless5357
Жыл бұрын
Nice work, and great video!👍🏻
@mystuffedgarage9907
Жыл бұрын
Thank you!
@DIY_Activities
5 ай бұрын
Will the dump bed go up with the bed extended?
@dangipson89
Жыл бұрын
I pick mine up next weekend what was the cost of the the lift.
@mystuffedgarage9907
Жыл бұрын
I think I have around $900 on eBay. It’s worth every penny!!
@jimandwendy
2 жыл бұрын
Thinking of doing this to mine. Seems kind of slow. Want to dig out a small pond and haul the dirt up a hill and dump.
@mystuffedgarage9907
2 жыл бұрын
It’s definitely on the slow side, but keep in mind it’s a all in one unit that takes Manual lifting out of the equation. I absolutely love it! I’ve loaded mine down well over 1000lbs without any issues. Disclaimer I would never recommend going over factor specs. ;)
@eddieh.4202
3 ай бұрын
How long is the stroke
@ridgetopoutdoors1460
11 ай бұрын
Do you know the dimensions of the cylinder such as the retracted and fully extended lengths?
@mystuffedgarage9907
11 ай бұрын
I’ll get those measurements in a few days!
@mystuffedgarage9907
11 ай бұрын
Just posted an update video with measurements. Please check it out!
@kelleywilliams5334
10 ай бұрын
I'm guessing you can not raise the bed when using the full bed!
@mystuffedgarage9907
10 ай бұрын
You can raise with both size beds no issues. I’ve raised about 1500lbs with no issues. Mind you I would not recommend going over max capacity of 1000lbs.
@camlea431
2 жыл бұрын
How long was the install time?
@mystuffedgarage9907
2 жыл бұрын
If I wasn’t worried about filming and just went straight at it about 2hrs total install. Now that I know what I’m doing it would probably take me only an hour as it’s pretty straight forward but the install instructions are not the best.
@absolutelyelegant1
Жыл бұрын
Do you know if this would work for a 2005 Mule 610 4WD?
@mystuffedgarage9907
Жыл бұрын
The 610 is a little different design so the prefabricated brackets would probably not work. How we with some modifications you could make this work. The power actuator is a standard actuator made for Kawasaki by Kayaba. Thanks for watching!!
@ThrivingCountry
Жыл бұрын
So is it strong?
@mystuffedgarage9907
Жыл бұрын
I've had at least or exceeding recommended capacity and have had ZERO issues. It's been an amazing addition.
@StarknightMT_official
Жыл бұрын
Are you interested in shooting the product testing video in your spare time? About the seat cover for your Kawasaki Mule PRO FXT
@mystuffedgarage9907
Жыл бұрын
Sure please send over the details to mystuffedgarage@gmail.com
@StarknightMT_official
Жыл бұрын
@@mystuffedgarage9907 Thanks for your reply. I will send you the email.
Пікірлер: 35