I Bought the Kit, worked like a dream. I was unable to reset my belt sensor and this bypassed the whole thing. 4wd actuators actually kick in again, and no more limp mode. Easy to install. Great video
@KnightATV
3 жыл бұрын
Glad to hear!! Thanks for trusting us :)
@rolandgaudet5226
3 жыл бұрын
Got this kit for my 03 , kawasaki 360 works great ,easy to install , had to order the manual 4x4 actuator kit after speaking with Joe as the electronic actuator did not "see or recognize "the by-pass install. All in all my 4 wheeler works great now , GREAT PRODUCT , Thanks SGROI Innovations
@gabrielleroux4959
3 жыл бұрын
Where the buys to kit ? Ou je peux acheter le kit
@KnightATV
3 жыл бұрын
Glad to hear Roland!! Thanks for trusting us and happy riding!
@natureselement7588
Жыл бұрын
I have a few things I'd love to see for this wheeler ad I have one snd theirs barely any fixing vids for the machine. I need to fix my 4 wheel drive I think anyways.
@KnightATV
Жыл бұрын
Feel free to call us with whatever issues you are having. We are always happy to help!
@kraftcraft2934
6 ай бұрын
Cool imfo
@pinchface
4 күн бұрын
Ive bought the kebc bypass module and I cannot get out of limp mode. Help
@KnightATV
4 күн бұрын
@@pinchface Hi, have you tried the belt light reset procedure? We have a video on how to do that as well. Send us an email or give us a call and we will be happy to help you.
@Enchanted_Adventures505
Жыл бұрын
My actuator above the belt housing makes a bad grinding sound and soon goes into limp mode. Should I replace the KEbc or can I bypass using this process.
@KnightATV
Жыл бұрын
This kit includes our KEBC delete kit which will allow you to remove the bad actuator 👍
@the1chevyman
Жыл бұрын
My belt light and 4wd light is blinking. Will this fix both? 4wd isn't working either.
@KnightATV
Жыл бұрын
Most likely yes, however if your 4WD issues could be coming from a bad 4WD actuator. You can bypass everything and get one of our full manual conversion kits. That will definitely solve all of your issues!
@pblackburn6238
Жыл бұрын
I have a 06 360 that I think is in limp mode. Checked belt switch was in on position and reset the belt light that’s always flashed and it quit flashing. 4wd light is flashing but other than that it runs perfect idle and taking fuel except it only runs about halfway open. Any suggestions? Thanks
@KnightATV
Жыл бұрын
So to determine whether or not you’re definitely in limp mode, try revving the vehicle up while in neutral. If it revs up normal, you are not in limp mode. If it starts limiting while in neutral at a low rpm and always limits at the same RPM you are most likely in limp mode. The Prairie 360 Belt Light Bypass kit will get you out of limp mode once and for all. The only way it won’t is if you have have a broken wire somewhere or your ECU is bad.
@pblackburn6238
Жыл бұрын
How would a person know if a ecu was bad?
@KnightATV
Жыл бұрын
@@pblackburn6238 You can inspect the ECU and see if it looks damaged. Sometimes the bottom will have a bulge on the bottom indicating something burned out on the inside. Otherwise it’s kind of hard to know for sure without having a spare one that’s definitely working to swap out.
@robsshop3594
Жыл бұрын
So I have an 03 360. I believe it is in limp mode. The belt light seems to be flashing a code. 7-5 i think. Belt light reset procedure does nothing. The ATV sputters on snap throttle or under load. Is that limp mode? Will this kit fix this issue?
@KnightATV
Жыл бұрын
Yes, absolutely. This will get you out of limp mode and back to full power!
@robsshop3594
Жыл бұрын
@@KnightATV Sweet deal! I ordered up the kit this am. Thanks!
@KnightATV
Жыл бұрын
@@robsshop3594 you’re welcome! Give me a call if you need anything else. 732-737-7761
@Mojo420yo
3 жыл бұрын
What does taking that off do?
@lucasclark4813
Жыл бұрын
What is the issue if it won’t come out of limp mode after install? I installed this entire kit, still in limp mode after setup and ‘clearing’ it. Thanks
@KnightATV
Жыл бұрын
The only way it can still be in limp mode is if there is a broken wire between our kit and the main ECU, or if the ECU is burned out (meaning there is a broken connection in the ECU board, same as a broken wire). But the most common issue is a carburetor issue that is mistaken for limp mode. Call us and we will help you figure it out, 732-737-7761
@cearabostick9315
4 ай бұрын
Did u ever figure out what it was . I think other electronics going bad would also cause it to throw the belt light that won’t go away until u finde the problem
@tspecht610
2 жыл бұрын
Why do you need to go through so much just to bypass a switch? Isn't the real problem in the switch for the belt? Why not just wire it closed circuit and call it a day? I thought you want that actuator that you removed to help slow you down when you go down hills when you are letting off the gas?
@KnightATV
2 жыл бұрын
This video shows you how to bypass the belt light & KEBC actuator. There are many common issues our kit fixes such as not being able to reset your belt light, stuck in limp mode, KEBC actuator pulling power from the battery 24/7 (even when vehicle is turned off) and so on. You are right that the KEBC actuator is to help you automatically slow down however, many people prefer to bypass that feature.
@pedromendia152
3 жыл бұрын
My 05 prairie 360 is making a grinding noise when I try to put it in gear could you tell me what’s wrong with it
@kenknight8399
3 жыл бұрын
yeah you have a clutch problem
@AlexLopez-nm3bd
2 жыл бұрын
You might have to tune your carburetor lower and it should work
@AlexLopez-nm3bd
2 жыл бұрын
Worked for me
@tspecht610
2 жыл бұрын
@@AlexLopez-nm3bd When I first bought my 360 I got it super cheap from the honda dealer because they couldn't get it to shift and then I called the Kawasaki dealer and he turned the idle screw down and had it shifting perfectly in 30 seconds.
@tylarpratt6439
3 ай бұрын
We’re can I get one for the 07 Kawasaki 360
@KnightATV
2 ай бұрын
Hi Tyler- we are currently working on a model for 2007 models and up. Please check back on our website for updates. We are working on new models every week !
@TheMDB1986
Жыл бұрын
I have an 03 kvf650a2, I have tried everything to get the belt light to reset and get it out of limp, light never changes speed during procedure. Will this eliminate that to where I don't have to do the reset at all and it will run normally after install?
@KnightATV
Жыл бұрын
Yes, although you would just need our KEBC delete & hole cover combo, the belt light bypass is for prairie 360's years 2002-2006 only. If the speed isn't changing its most likely your belt switch or the reset procedure isn't being done correctly. With our kit, if the belt light doesn't clear after installation then you will need to perform the belt light reset procedure with our kit installed, it will clear your belt light, get you out of limp mode and you'll never have to deal with the headache again! :)
@Williamlofton-dr5fu
3 ай бұрын
just installed this. still in limp mode
@KnightATV
3 ай бұрын
You did the reset procedure? Call us 732-737-7761
@michaelcordova3926
Жыл бұрын
Will this fit my 98 400 prairie
@KnightATV
Жыл бұрын
No, you need our "KEBC delete kit" to bypass your belt light, this kit is only for 2002-2006 Prairie 360's.
@frankywalter2997
8 ай бұрын
I have an 07 Kawasaki 360 would it work ?
@KnightATV
8 ай бұрын
You need our KEBC delete kit, this kit is for 2002-2006 only. knightatv.com/products/brute-force-prairie-kebc-delete-hole-cover-combo
@frankywalter2997
8 ай бұрын
Well mine is 07
@frankywalter2997
8 ай бұрын
Thanks I'll let you know if it works I just ordered one
@devinwilson500
2 жыл бұрын
I have followed you procedure step by step and I have tried to get my Kawasaki 360 out of limp mode and stays in limp mode. Any suggestions on how to get it out of limp mode?
@KnightATV
2 жыл бұрын
Hi Devin, do you have our KEBC delete kit? If you do, did you completely remove your KEBC actuator?
@devinwilson500
2 жыл бұрын
@@KnightATV hey, yes I have completely removed the kebc actuator and covered it.
@KnightATV
2 жыл бұрын
@@devinwilson500 Are you doing the belt light reset procedure? If you are doing it correctly, the speed of the light flashing should change, does that happen when you are performing the belt light reset procedure? Please email us at sales@sgroiinnovations.com or give us a call at 732-737-7761 so we can get this figured out for you :)
@devinwilson500
2 жыл бұрын
@@KnightATV I have been out of town for a couple weeks but I will do the belt light reset procedure and see if the light speed changes. This is done after I have deleted the kebc and then I do the steps at the end of your video correct?
@KnightATV
2 жыл бұрын
@@devinwilson500 Yes exactly! Please let us know how everything goes
@ivanramos5530
2 жыл бұрын
I may need that kit pls send me info thx
@KnightATV
2 жыл бұрын
You can check out this kit here: sgroiinnovations.com/products/prairie-360-belt-light-bypass-with-kebc-wire-harness-kit?_pos=4&_sid=b18436c58&_ss=r
How much for the kit and where can I order it from
@KnightATV
3 жыл бұрын
Hi Angelo, here is a direct link to this product sgroiinnovations.com/products/prairie-360-belt-light-bypass-with-kebc-wire-harness-kit?_pos=13&_sid=233bb596b&_ss=r It currently retails at $164.94
@glenragan1483
3 жыл бұрын
What’s that do
@harryrupertus2075
4 жыл бұрын
Do you have this for a 2007 model?
@tonybilly2709
2 жыл бұрын
My is 07 do they have one
@fxdraco576
2 жыл бұрын
Will my 4x4 still work?
@KnightATV
2 жыл бұрын
Yes of course!!
@fxdraco576
2 жыл бұрын
@@KnightATV okay thank you
@fxdraco576
2 жыл бұрын
@@KnightATV i got and I’m exited to get it installed
Пікірлер: 64