Just got mine! Did my build along with your awesome video! VERY HELPFUL...Great flavor and clouds. I think im set now I also have the Taifun GT1V, THANKS AGAIN!
@jamesm217
8 жыл бұрын
I love how in depth your reviews are,very impressed geekay vapes
@GeekayVapes
8 жыл бұрын
+James Mucklin Thanks!
@cosmoantonioignazzi3330
7 жыл бұрын
You are my hero :) you are the only vaper that explained the airflow control for different king of juices !!! thanks and greeting from Italy!!!!
@GeekayVapes
7 жыл бұрын
+Cosmo Antonio Ignazzi Thank you!
@chic38fulton71
8 жыл бұрын
Best review of the Kayfun V5 out there ,cheers.
@callous01
7 жыл бұрын
This was a great video and the coil/wicking guide helped me so much, many thanks!
@kivatt0
8 жыл бұрын
Hello Geekay Vapes, I've won a clone version of the KV5. So far it performs very well...the flavor is good and the throat heat feels hard as compared to my russian 91 clone with the same juice...thanks 4 the video..it helps me a lot..btw my setup was khantal 28, 6 loops and i got 1.2 ohm..normally fired around 12-13 watt using a vt40 mod...
@vashcorler
2 жыл бұрын
What a good review! I really miss you bro
@mikeb835
8 жыл бұрын
So thorough my friend. Thank you!
@danzesociety
7 жыл бұрын
Got the SXK clone today. Cost £28. Unbelievable flavour. Better than my Baby Beast.
@china33ful
8 жыл бұрын
Thanks for the total breakdown in the name of science lol! Very through, great job! Subbed! Liked & favorited!
@MsShannonVee
8 жыл бұрын
Great vid.. Helped me allot too figure it out. Thank you!
@jpasint
8 жыл бұрын
Excellent review, thanks.
@thomasrowlands5087
8 жыл бұрын
First review of yours I've found, and it's a great one, thanks for your work! Subbed and will be checking out more of your videos !
@GeekayVapes
8 жыл бұрын
+thomas rowlands Thank you!
@paulmeadia6607
7 жыл бұрын
Best review of this great atomiser, thanks
@GeekayVapes
7 жыл бұрын
+Paul Meadia Thank you
@bossplaya29
8 жыл бұрын
Great detailed video, thank you!
@voodooxylophone
8 жыл бұрын
Great review Geekay, a very in depth review on the KFV5. Is the tightest airflow setting similar to the KFL? And your accent do sound like you're from SE Asia... Just curious. Cheers buddy, and thanks for the review once again, keep it up!!
@biggjeppe
8 жыл бұрын
Great Review - thank you!
@jtmunn4496
8 жыл бұрын
I couldn't be happier with this kayfun so far after 4 days not a single dry hit the flavor isn't as good as my amon rta but it's damn close the kayfun 5 can be run at higher watts and bigger builds tho so it's a good trade up for flavor vs ease of build
@nelsonm5032
8 жыл бұрын
i'm pretty sure I read that there are longer post screws in the bag of spares for larger diameter wires, I could be wrong though ;) great review dude, very thorough :)
@Keith_Mikell
8 жыл бұрын
The clone is dead on. A friend of mine has one and we cannot tell the cosmetic differences. Only differences are those weird smelling china o rings and the fitting of the o rings. The juice control is actually looser and better because it doesnt get stuck. I have an authentic V5 so we compared. I saw on your site that you published about it. His clone is from 3FVape. Its an SJMY...
@edwinteo9341
8 жыл бұрын
Wow... Thanks for d great simple comprehensive review... Always been interested in a Kayfun like everyone else... Almost invested in d 4... D review save me $$$. Terima Kasih. 🙂
@psyclobe
8 жыл бұрын
Nice review!
@dnezarmichael
8 жыл бұрын
Awesome show, as usual, keep up the good work.
@kgskoda5911
8 жыл бұрын
nice review !
@china33ful
8 жыл бұрын
3fvape has just the POM tips for $1.99 in different colors. FT has clone drip tips with different colors. For authentic Kayfun v5 users just getting the different colors POM.
@kookikookikat9402
8 жыл бұрын
Fab video....again :)
@Liv1ngTheDream
7 жыл бұрын
Nice one, I was messing the wicking up big time lol
@georgemastragelopoulos9496
6 жыл бұрын
very good my friend you are the best
@abyedrikn
7 жыл бұрын
hey guys, I just started vaping 3 months ago and I really dont understand the concept but I love it. I have been using tfv8, leaking problem never stopped and it tasted more like shit every passing day. Last night I got sick of wasting juices(also the shitty taste) and ordered a kayfun 5. What are the chances for me to fuck it up? Is it easy to use for an amateur like me, does it ever leak? I ordered Transformer Coils (0.5Ω) is it a good choice? What are your best coil suggestions for me? Thanks!
@beccacciahunter238
7 жыл бұрын
I bought a k5 one week ago, and my cotton becomes black from the first 5 ml. with tha same e liquid in other rtas i had no issues, any idea for my problem?
@ngochanbuicao5557
4 жыл бұрын
What name of box mod you has used in this video?
@LessTalkMoreDelicious
8 жыл бұрын
Very nice tank and also review. Does anyone know who's gonna make the highest quality clone of this tank? Infinite, Hcigar, EHpro, Tobeco, A-Mod/Wotofo perhaps?
@GeekayVapes
8 жыл бұрын
+Less Talk, More Delicious I have the infinite V4 and it's pretty darn good!
@LessTalkMoreDelicious
8 жыл бұрын
Geekay Vapes ..Nice. I'll keep an eye out for any Infinite clones. thx
@ATLAS719711
4 жыл бұрын
In which Watt are you vape with this resistance, ?
@samerabdelnassir7511
8 ай бұрын
Is it the best M Aris 2 M Firebird M Xpromiser 5 ؟
@dennarodrigues234
6 жыл бұрын
Geekay, is it still worth it to buy the v5? I wanted the Taifun GTIII but i cant find it and the Kayfun V5 is available in a shop nearby. It still cost me 120€ so if you could let me know if its still worth it i would be gratefull!!
@michaeldaury5485
8 жыл бұрын
I'm taping on a Kayfun Lite clone right now watching it so I will be buying the Clone
@GeekayVapes
8 жыл бұрын
+Michael Daury V4 infinite clone?
@michaeldaury5485
8 жыл бұрын
+Geekay Vapes if I can find the clone I will buy it.Idont know it's but I will be looking.I love your vids man You are very entertaining
@h-dawg6462
8 жыл бұрын
why are you "taping" on it........did you crack the tank??!!!!??? :D
@michaeldaury5485
8 жыл бұрын
+Aitch Dee lol vaping😊
@mimo.46.
8 жыл бұрын
Hello, nice build there. Can i ask whats the difference in terms of flavor and vapor with your coil and with a kanthal/kanthal clapton coil?
@GeekayVapes
8 жыл бұрын
+Oren748 With Kanthal / Nichrome Clapton I think the resistance is lower and taste is better for fruity flavors. For other flavors I don't see any real difference.
@mimo.46.
8 жыл бұрын
thx for the info!
@aggelosmor
6 жыл бұрын
I have the sxk one.. Great flavour. But I can't stand the leaking. Every time I refill there is about 2ml of liquid leaking through the airflow. I also noticed that when I blow through the drip tip then I get bubbles through the juice holes. Is there a problem with the orings? How can I detect what o-ring is the "bad" one ? I waited 3 months for this atomizer from 3fvape and I am so dissapointed.. any ideas?
@kickthejamz
6 жыл бұрын
aggelosmor hey I would like to throw this out there because I've watched a lot of videos of people reviewing this and they had the same issue with the clone. There is an oring that is missing somewhere on the tank but the spare is included in the extra bag. I dont remember the exact ring but I'm getting mine on tuesday same model sxk. Hopefully you can figure it out, but you like the flavour so far?
@aggelosmor
6 жыл бұрын
Roy Glass the flavor is fantastic. I also have the wismec theorem which I consider a flavorful rdta but the kf5 has two times more dense and "in your face flavor". I have no problem with the theorem, even if I leave the tank upside down but with the kayfun I am afraid I am going to screw my mod with all that liquid. Haha
@DONTSHOOT999
6 жыл бұрын
Close the juice flow before you refill.
@vashev7056
8 жыл бұрын
Have you pushed it further than 40W? Able to chain vape with high VG at the higher watts? Great review thanks !
@GeekayVapes
8 жыл бұрын
+William Affleck Above 40 the vape is too warm for me
@QckSGaming
8 жыл бұрын
At least on 35 watts you can chain vape no problem on Max VG.
@iwiliaasr5086
8 жыл бұрын
cool video
@zero2three1
8 жыл бұрын
Always curious about Kayfuns as there is a strong following but never purchased one because of other options. Aside from the build quality, and even price, how is this comparable to other single coil tanks? Is the flavor and function better than say the Wotofo Serpent or the EHpro Bachelor?
@GeekayVapes
8 жыл бұрын
+zero2three1 Kayfuns are like religion. You have to first be a believer, then you can understand it lol :)
@zero2three1
8 жыл бұрын
I'm an atheist so it aint for me.
@ivarisaksen
6 жыл бұрын
Thank you:-)
@15Godrick
7 жыл бұрын
bought the kayfun v5. Every time by the end of the day, my juice is burnt. The color changes from a clear or gold to brown. The coil gets dark too. I'm using clapton, 5 wraps, 2.5mm to 3 mm. Vapid from 23-33 watts, 4.2-4.5 volts. Any idea what the problem is
@MrDavekek
7 жыл бұрын
Sounds like heavy sucralose liquid :p
@paulmeadia6607
7 жыл бұрын
+1
@GeekayVapes
7 жыл бұрын
+Godrick15 Like he said probably the juice
@Pagl302
Жыл бұрын
Good bro
@GenSparks
7 жыл бұрын
I never glow my coils anymore due to the metal can loose there properties and you have more chance of it coming in your vape.
@GeekayVapes
7 жыл бұрын
Glow it and wash it off then if you're worried about loose metal parts. In my opinion the metal would need much more heat than what a vape device can give to break or melt. You can also use alcohol wipe to clean it.
@vashev7056
8 жыл бұрын
At 35-40 watts were you getting any burning or dry hits ?
@GeekayVapes
8 жыл бұрын
+William Affleck Nope none of that. Except when I forgot to twist the tank back after filling it, just kept vaping till started getting dry hits
@chaichingsia
7 жыл бұрын
thanks
@georga.9236
8 жыл бұрын
I watched the whole things and I have a few things noted. 1. This is not a sub-ohm tank. 2. You are reviewing an authentic product, do not talk about clones. 3. Thank you for your time
@GeekayVapes
8 жыл бұрын
+Danny Devito Very neat and structured comment. I like!
@teabobaggins2909
7 жыл бұрын
Danny Devito 1.wrong
@asrr62
6 жыл бұрын
.6 ohm coil is perfect for this. so it is a subohm.
@user-xf1lp4gd8t
8 жыл бұрын
i the first look... it seems like a mechanical engineering equipment. :p but looks great and vapes perfect!!
@nige65
7 жыл бұрын
i didnt like that wicking method and doubt it worked well for you, ?
@GhostvaperYT
7 жыл бұрын
that lube tho!
@dasoultube
7 жыл бұрын
can't change the pyrex or remove the chimney :( is so damn tight, used hot water, didnt work dont want to break it either !
@GeekayVapes
7 жыл бұрын
It is pretty tight at first, but I managed to get mine off. Hot water only makes it tighter I think as the orings expand. Try cold water.
@dasoultube
7 жыл бұрын
+Geekay Vapes ty man, gonna try it
@ToasterDude1
7 жыл бұрын
goddie darko use rubber gloves for a better grip, works great
@outlawrallyrob
8 жыл бұрын
Ace well helpfull thanks
@hairybubba6807
8 жыл бұрын
Looks like old Hairy Baby strikes again ! LOL
@Shuvojit69
6 жыл бұрын
2:32 14:57 19:15
@rico300zx
6 жыл бұрын
I’m picking one up on fasttech today SKU9573300 they have a 10% off sale for Christmas for like $12 thanks for the review. Can you tell me the type and detentions of your build please?
@lukeshoot
8 жыл бұрын
no spare glass tank? i'm sure that i'm gonna break the glass tank within 1 months or less.... as always,
@GeekayVapes
8 жыл бұрын
+lukeshoot Nope lol
@lukeshoot
8 жыл бұрын
due to the size of the glass, when it fell to the ground, it most likely to be hit and broke. Even on my kayfun 4, which had smaller surface area, after a couple of incident, it did get hit and broken... the bummer part is its hard to get the replacement where I live...
@fatousarr3715
8 жыл бұрын
+Geekay Vapes wt
@fat-nx6oo
8 жыл бұрын
top
@PumaDedek
8 жыл бұрын
ok
@Count_Grishnackh
8 жыл бұрын
that V4 appears to be a clone. the mini v3 and v5 look legit though.
@GeekayVapes
8 жыл бұрын
+xzach23 x Both V4 and Mini in this video are clones, I think I mentioned that.
@Count_Grishnackh
8 жыл бұрын
sorry didnt catch it. i watched the whole thing vid too my bad
@jasonhunter6125
8 жыл бұрын
I don't like this way of buildilng; I want a vertical coil and the cotton around the wire and I want manual clamps for the wire. I also want top airfow that is routed down beneath the coil, so that it exits out in the middle of the coil. This, in my opinon, gives correct airflow, is faster and easier to build, instead of f'ing around and wasting time with pushing cotton through the god damn small wire hole and f around with screwdrivers and whatnot.
@michaeldaury5485
8 жыл бұрын
I'd buy the clone in a minute can't justify the price for the original
Пікірлер: 107