nibbiracing.com/collections/pe-carburetor/products/pe17fl This one has a 46mm intake so get it as close as u can to that. A 48mm should be able to be tightened to it
@bismarcktorres8747
6 ай бұрын
Thank you for the info, really helps. Question, did you have to tune the new carb when you replaced it?
@devincloud84
5 ай бұрын
No i left the stock jetting in the carb as it was sent. No worries there
@michaelguzman1286
2 ай бұрын
Hey I’m new to dirt bikes and I just got my kids the ts90. I just ordered the carb and filter. But newbie question, do you use regular fuel on the kayo bikes? 91 or 87 octane?
@devincloud84
2 ай бұрын
91 octane is what i use. U can use 87 put performance might suffer some, buy 91+ is the best
@NoahsRiding16
Ай бұрын
Did you change out the carb because of proformance? I’m having trouble with water and dirt going thru the air filter when my boy rides thru the mud and water… it sucks in water and stops running.. I have to use carb cleaner then it runs good again
@devincloud84
Ай бұрын
Yes it perfoms much better with the new carb and the nibbi dual foam air filter
@NoahsRiding16
Ай бұрын
@@devincloud84 Looks like in the comments there are different sizes what size do I need for the TS90
@user-nd5sb8ep9b
5 ай бұрын
How hard was the swap. Im used to working on small engines such as chainsaws mowers and stuff like that. Just got mine in the mail today
@devincloud84
5 ай бұрын
Really Easy, maybe an extra set of hands is all.
@tycollet3204
3 ай бұрын
What is the link or part number for the one you put on the 125
What Type of Carb would I need to purchase, to fit on the TS90? Looking to upgrade that and the Air Filter like yours
@devincloud84
3 ай бұрын
The 17mm PE flange carb
@jonathonmendoza1989
3 ай бұрын
@@devincloud84 Thank You! what about the aftermarket Air Filter? I like that Setup!
@user-nd9yi8oz5w
4 ай бұрын
Which air filter did you use? Nibbi has a few.
@devincloud84
4 ай бұрын
The dual layer clamp on. Black outer and yellow inner
@tekblu
8 ай бұрын
which air filter did you use on the 19mm 125
@devincloud84
8 ай бұрын
Dual layer foam air filter 35mm on the nibbi website
@HIGHLYMOTO
5 ай бұрын
Bro I can’t figure out how to start the TS90 lol 😂 I’m new to these type of bikes
@devincloud84
5 ай бұрын
You can call me 4175408218 and i can walk you through it
@HIGHLYMOTO
5 ай бұрын
@@devincloud84I figured it out 😅 what all upgrades do you have on the Ts90? And do you know of a installation video on the carburetor and air filter?
@devincloud84
5 ай бұрын
@@HIGHLYMOTOi have nibbi performance carbs and their double foam airfilters. Literally all ive done to that bike
@HIGHLYMOTO
5 ай бұрын
@@devincloud84 is it a pretty simple installation?
@nickbielke-uk6wd
2 ай бұрын
Sorry to bother you with the same questions….I have a TS90 and I ordered the 17mm (PE17FL). I just tried to install and it’s way too big. Any advice? Thank you Nick
@devincloud84
2 ай бұрын
When u say to big what do u mean?
@nickbielke-uk6wd
2 ай бұрын
Sorry right after I sent that I went back out there and it worked perfectly. Seriously 3 minutes to install and running!!! Thank you so much for this video! Have a great weekend. Nick
@devincloud84
2 ай бұрын
No worries its how we learn, enjoy tge bike!
@kratic7696
4 ай бұрын
didn't your TD125 already come with a nibbi carb? I just bought one today,ordered the nibbi carb and noticed the bike already came with one.
@devincloud84
4 ай бұрын
Yes they do but they are a much lower quality version
@juliogarcia8441
2 ай бұрын
Hey what type specifically nibbi carb they have pe12 and other stuff I have a kayo125 td too
@devincloud84
2 ай бұрын
PE19FE for the 125 @@juliogarcia8441
@derekshoots556
3 ай бұрын
I have a Kayo tt140 what carburetor millimeter do I need to get
@devincloud84
3 ай бұрын
You can look on your carb and it should have a number on the bottom portion. That should correlate to the flange size on the PE chart
@kevinengel8959
4 ай бұрын
I have 2 kayo td 125 and have had trouble with both since new starting and running. What nibbi carb would fit them i cant seem to find a definite answer. Exact set up you had on yours. If you could give info on a part number and where to purchase the right nibbi carb i would greatly appreciate it. Thank you
@devincloud84
4 ай бұрын
PE19FL
@devincloud84
4 ай бұрын
Also just go to the nibbi high performance website
@kevinengel8959
4 ай бұрын
Thank you for taking the time and for the info. I really do appreciate it
@racevision75
Ай бұрын
Do you have a part number for the filter? I can’t find it in Nibbis website
@SR-mh3if
2 ай бұрын
Just purchased one for my son's 90cc Kayo pit bike. Is this a pretty simple swap or should i take it somewhere to get it put on.? Im working on it now and having issues getting the throttle pin and spring back in correctly. Any advice or help ?
@devincloud84
2 ай бұрын
The throttle pin and spring should just go in easy. Did u put the lock clip in their? Id say if you are in spokane wa i could help, if not nibbi has some good videos that u could search. Just type in the pe17 carb installation and should pull up something that might help
@SR-mh3if
2 ай бұрын
@devincloud84 it was still in there. The throttle pin just seems to move around super easy and when I twist the throttle the first time it seems ok but when I do it again it's really loose, almost like the spring isn't catching
@devincloud84
2 ай бұрын
@@SR-mh3ifif it was working before id say u need to take it in to someone who can see it.
@SR-mh3if
2 ай бұрын
Got a stupid question for you. New carb came in. Easy install (or so I thought. Got it installed but gas it coming out from everywhere including the air filter. It did come with extra main and pilot jets or so i assume. Took the bottom off of it and everything seemed in place. Any idea what I'm missing or do I just need to take it to someone. Appears the entire carburetor was flooded out. Gas was coming out of the air filter and a run off tube.
@user-di7my2cz9i
4 ай бұрын
Is the 48 mm air filter right for the 17mm
@devincloud84
4 ай бұрын
I believe thats the 45mm.
@toddrenshaw24
3 ай бұрын
Which model carb did you use?
@devincloud84
2 ай бұрын
PE19 for TD125 and PE17 for TS90
@jpgall1
5 ай бұрын
Do you have nibbi part number for ts90?
@devincloud84
5 ай бұрын
Its their 17mm flange
@devincloud84
Жыл бұрын
If anyone wants info on these Kayo Bikes just ask. If you want to see a subject covered let me know
@vincentsheehan4290
Жыл бұрын
What part # did you order for the 90?
@devincloud84
Жыл бұрын
@Vincent Sheehan nibbiracing.com/collections/carburetor/products/nibbi-pe-carburetor?variant=42134324314277 Make sure u order the 17mmFL
@devincloud84
Жыл бұрын
@Vincent Sheehan the pilot and Main jet that come in the carb are just fine. No need to get a jet kit.
@PaperBeatsRockx
9 ай бұрын
I’m thinking about upgrading my carb is that the 17mm? What size jets are you using?
@devincloud84
9 ай бұрын
@dylantaylor58 the TD125 uses the 19mm and the TS90 uses the 17mm. Just use the jets that come with it. They work perfect but, order a nibbi air filter with it. Those are the best
@staygold1017x
7 ай бұрын
What jet size are you running on your 125?
@devincloud84
7 ай бұрын
Well its been a minute but the nibbi performance carb jets that cam installed and they run great.
Пікірлер: 66