I need to stop watching this channel you’re making go broke buying all these things for my Jeep I didn’t know I needed 😂 enter me in for the drawing please!🤙🏼
@trentoncooke9353
3 жыл бұрын
lmaoooo same, i hate watching these haha
@rcud1
3 жыл бұрын
I saw this and put one of these in, get almost 1/2 a cup oil after just a 1200 miles or so. I got from UPR Products and came with really nice hoses and easy to remove to empty.
@allenvincentjr
4 жыл бұрын
I put one on my ‘17 jku a month ago with 36k on it. Just did an oil change and in one month the amount it caught was astounding. I did use an actual fitted kit with hoses and bracket by mishimoto. It was eye opening enough for me to comfortably recommend a catch can of any sort to fellow Jeepers, or any car for that matter.
@checkurselfb4uwreckurselfw173
Жыл бұрын
Like Ford, in their 6.7 from 2011-present, is still using a CP4 pump that will burst & brake up & inject metal shavings throughout the entire fuel system/engine - to the point the owner will have to pay $10K-12K to remedy. Ford knows this CP4 is a bust, but like their 6.0 engines, they do not care because their dealerships made bank off the frequent repairs. Ford sales a disaster prevention kit (LOL) for a truck that people paid $70K-90K. Great Ford. Really "Built Ford Tough". Now I hear that the Mopar 3.6L consumes oil like the vehicle just ate marijuana brownies & oil is its only appetite suppressor. So an oil catch can is most likely needed so one does not burn their motor up because the engine is "baked" (pun intended) & eating all the oil. People buy brand new vehicles at premium prices to buy POS's & have to modify their new vehicles to allow them actual longevity. Maybe the car moguls are wanting to build crap so we will all think EV is the way to go. IDK, but the post herein has validity & I am pissed because I own all motors herein (6.0, 6.7 & 3.6). IMHO
@trjnsd6874
4 жыл бұрын
Bought a used ‘05 WK three years ago and installed a catch can (BilletTechnologies) on the Hemi right away. Every oil change I empty about a third of a cup of oil out of the can! I learned about CC’s from KZitemr videos. Thanks Y’all!
@legoMan104
4 жыл бұрын
yall give so much good info to the community
@davidcollie55
4 жыл бұрын
my yj 350 needs an oil catch can help me out please sir
@kenm9682
4 жыл бұрын
Watched the video and it reminded me to put on on. I'm going to mount mine closer to the engine so it stays warm and doesn't freeze up. The Joy of canadian winters
@leoaguilar5194
4 жыл бұрын
Inspiring channel to do hands on work on my Jeep Jk. Thank you man for giving us all this material to work with. You are awesome. Don’t ever quit making JK videos!
@spartan463
3 жыл бұрын
Its insane how a universal one is soo cheap but the JK kits are like 10x more expensive. Already on Amazon...
@ToxicGamer-bl2sc
4 жыл бұрын
Hey, I’d like to be entered or something. I’d love to install it on my own JK to keep that engine sparkling clean! Love the content, keep up the great work!
@MrStatic101
3 жыл бұрын
I have always despised pcv systems because of the whole concept of sending that filth back into my engine. I had no idea this even existed. Thank you so much for the great info. Also I’d like to be entered and win or something.
@scottlyng7994
4 жыл бұрын
“Hey dad wanna have a catch..... can”
@auntjanet2346
4 жыл бұрын
Ha, you would win if 'twas up to me.
@rmjryost
3 жыл бұрын
Installed JLT oil catch can on my 2016 JKUR. I get about 1-2oz oil collected every month! Yes they work. Is it worth it? ABSOLUTELY!!!
@DJLO50KC
4 жыл бұрын
Count me in the giveaway! I’d love to do another mod to drive my wife nuts! 😂
@BadMotor187
3 жыл бұрын
Thank you, I had kinda written off a catch can as not necessary, but having watched this, I've changed my mind!
@iloveredandblack
4 жыл бұрын
“Just leave a comment”
@bgt595
2 жыл бұрын
New to the JKs land with a 2012 Rubicon and you're the first subscription regarding the specific vehicle.
@KansasSlim64
3 жыл бұрын
Hey, Ben! Throw my hat in the ring! And thanks for your service! USA retiree here.
@jaybrown2424
4 жыл бұрын
GOOD DAY FROM OREGON, JUST WATCHED THE VIDEO, GREAT PRODUCT FOR ANY VEHICLE, I HAVE FOUR CHEVYS AND A 2012 JEEP WRANGLER SPORT, THANK YOU AND YOURS FOR ALL THE VIDS.
@keithgranado1101
3 жыл бұрын
My wife and I just got a Jeep and we want to go to hidden falls. We’re very inexperienced and would love to join y’all on a trip. Love the channel guys keep the videos coming !!!
@kennywood6491
4 жыл бұрын
I love your show and would love to add a catch can to my 1982 Cj 5 project.
@danwilson2560
3 жыл бұрын
Glad you are showing a cheap way to do this. But I still think there is no benefit. Good on you for not pushing one of those expensive cans. For 30 bucks, it has low expense to go with the low (or no) benefit. I always enjoy your videos!
@JKGearandGadgets
3 жыл бұрын
I always thought the same way, until we opened up the Ls engine and spent 6+ hours cleaning up years of oil and carbon buildup.
@danwilson2560
3 жыл бұрын
@@JKGearandGadgets I think you'd have that anyway. Most carbon build up and oil build up would be there anyway. My 2008 Jeep 3.8 is clean as can be after 145k miles. Mobil 1 oil and Top Tier fuel had everything to do with it. But still, there's absolutely no harm in a catch can. So why not? Again, love your videos!
@daniellorenzo7285
3 жыл бұрын
Ok Im in I will try to installation now that I understand more about Catch can thanks.
@williamh6547
Жыл бұрын
I prefer to vent DIRECTLY into the atmosphere 👍👍 make sure I do my part.
@chadalcock7275
4 жыл бұрын
Planning on installing one in my truck, so of course I'd like an entry. Great video except for 1 thing, the oil is going to destroy the heater hose. You need hose that is meant to handle oil.
@pennypackmtb2542
4 жыл бұрын
I'm overhauling my WJ and the oil catch can is on the list of upgrades. It is a list, after all it's a 20 year old 4x4. Can't imagine the CRUD inside.
@mtoddvan
4 жыл бұрын
Enter me too please! Not just the residual oil going into the intake makes it messy, but that oil can create deposits of carbon on intake values & can cause values to stick. Lol that I was the only person to invert pcv & pvc!
@markblandford9346
4 жыл бұрын
I really appreciate this video. I have been seeing people use catch cans recently, and you did a great job of explaining it's purpose. Thanks a million.
@davidahrens1269
4 жыл бұрын
I don’t want tell anybody how to work on their own rigs but I’d recommend silicone heater hose as oil can brake down the rubber in typically heater hoses
@jeffleuenroth7849
4 жыл бұрын
Good point about not pouring that oil back in the engine.
@unwrangler11
3 жыл бұрын
Thanks for a great idea! I’ll be doing it as soon as it comes in.
@pbhound
3 жыл бұрын
I will be adding this to my Amazon list
@3brothersinarmsoutdoor43
4 жыл бұрын
This is awesome to find an inexpensive way to do a catch can. And free is even better
@JCJustice1
4 жыл бұрын
I had honestly never heard of this option... Awesome information. Toss my name in the hat. Appreciate all the info you guys put out! Maybe one day I'll run into you guys at a Jeep meet here in Texas.
@amavisca77
4 жыл бұрын
Thanks for the follow up with the JT visor on a catch can. Your video with the JK surprising the amount of oil sent back into the intake. Thumbs up to your channel and content.
@fox351swap
4 жыл бұрын
Great item to add on to any jeep.
@christopherkiger3354
4 жыл бұрын
you can throw my name in too! love that you show and tell... real world jeep diy!
@Carl-vx9ws
3 жыл бұрын
🤔 something to consider for my 2015 JKU thanks for the video. 👍🏼
@joediver69
4 жыл бұрын
Just got my 1st Jeep it's ATJ 2.4 l 6 speed manual when I always wondered about the catch CAD now I'm definitely gonna get it thank you guys loved the video
@MichaelCook1981
3 жыл бұрын
PVC is made from oil...so you're good 👍. I always say PVC , instead of PCV. I took my engine apart to fix the Pentastar tick, was replacing the intake manifold gasket and saw oil under the gaskets.
@that68lifestyle
4 жыл бұрын
I have planned to put one on my JK. I have one on my classic car. Works great.
@Mattie_Ice
3 жыл бұрын
This is a common mod on 7.3s also know as a CCV mod. Crank case ventilator. Some guys dump to atmosphere simimar to semis but end up with a truck smelling like oil and smoking. Also whats important is to nevet let the oil freeze in cold climates otherwise your crank pressure will sky rocket and you could throw your spark plugs or injectors. So to remedy this keep it close to your engine to maintain warm oil in cold climates.
@jad21964
3 жыл бұрын
Thank you. I ordered the very can you have listed in the description. It looks great especially for $28 compared to some other name brands that are over $100. I installed it on my 2016 JKU today and fabbed a bracket from some aluminum angle stock I had left over from another project. I mounted it in the same place you have yours on your JK. I removed the OEM bolt on the fender (where your Switch Pro pod mounts) and put a bracket there to hold the can between the ECM and the brake module.
@jim9win
3 жыл бұрын
After watching this I got one to on Amazon too thank you for the idea
@lonewulf0328
4 жыл бұрын
Looks like a useful setup for my JTR.
@interwurx
2 жыл бұрын
I just found your channel. I am certainly enjoying your videos! FYI: the cost for this on Amazon is now $150.
@josh_rit8045
4 жыл бұрын
Ya count me in! That oil catch can would be sick! Great video too!
@jimmythesaint6184
3 жыл бұрын
I CAN dig it. Count me in for this contest!
@bongobrandycasy
Жыл бұрын
rubicon phil from NL, just found your videos , watched your oil catch can video , definitely getting one.
@oDphanatic79
3 жыл бұрын
A catch can would be awesome for my mini van!
@gsdls
7 ай бұрын
Thank you for the video and thank you for adding the link to the specific hose that you got. I was able to go to Lowe’s and get some heater hose in 10 foot length and I’m ready to boogie and install this. Keep up the good work.
@gsdls
7 ай бұрын
You noticed any negative effects of having a catch cam or did you find that you had to replace a standard fuel line with a steel braided line?
@no2thenwo737
3 ай бұрын
@@gsdls You don't need a steel braided line, just a 5/8 standard hose. Mine has lasted for nearly 3 years and is good as new.
@gsdls
2 ай бұрын
FYI the Lowe’s brand is no good cause it’s not for Under the hood application. It collapses on itself. I ordered the one recommended here.
@White.Elemant
3 жыл бұрын
Hmmm... Legend has it, 3.6 pentastar has two pcv lines... haven't checked myself (freezing outside, garage full of junk), but if that is the case, you'd (I will) need a twin inlet catch can, or a Y -joint somewhere along the line...
@JKGearandGadgets
3 жыл бұрын
Usually setups with 2 pcv lines only have 1 dirty line
@davidbaziii9779
4 жыл бұрын
I'm totally doing this for my YJ and my 3.6 Charger now. Great video. Love both of channels you guys have!
@tomgardner6294
3 жыл бұрын
Going to install one on my 212 JK. Thanks
@jeremynichols1326
4 жыл бұрын
Great video. Ordered one for my jk while watching the video hopefully win this one to install on the other jk
@irismercado1288
4 жыл бұрын
Always good to see that you’re always doing something new something different something better in your jeeps and your wife’s jeep love you guys show keep up the good work and be safe
@RyanBennett_Gpd605
4 жыл бұрын
I could always use a catch can! Great work guys!
@smokeGR14
4 жыл бұрын
I have a 20 wrangler sport...love hitting the trails. In it...been to Rausch creek 2 twice ..I have 14k on it already just got it may 2020....I'd put this on..
@switchbackoffroad
4 жыл бұрын
Missed your videos during the move. Glad y’all are back!
@Cbfair1
4 жыл бұрын
Nice DYI project Ben.
@stevenkienle7617
3 жыл бұрын
"I'd like to be entered or something"... this would be great setup for my LJ 👌🏻
@chriscook8076
4 жыл бұрын
Very nice install. I like very much. I’m all about losing the oil out of the PCV System. Thanks!
@davidhunter3191
4 жыл бұрын
I could use one myself. Love the the channel bud, and Cassie's too.
@davidhunter3191
4 жыл бұрын
@@Jarod1941 yep. Jeep Gear and Gadgets.
@kbialo2340
4 жыл бұрын
I’m in. Seems like a no brainer to protect the engine long term.
@garyhenion9459
4 жыл бұрын
Nice vid Been thinking of doing this to my Gladiator as well as a bunch of other stuff
@sailme2day
3 жыл бұрын
yes liked the install video , should help keep that oil clean longer . I am interested in being in your drawing for a free unit. Thank you .
@bradbos533
4 жыл бұрын
Thanks for the education! The catch can is a great idea......
@adrianbargen9727
2 ай бұрын
Best for turbo charged motors because of increased cylinder pressure increasing blow by. And only helps direct injection engines from gunking up intake valves over time.
@jaydenschmidt1350
2 жыл бұрын
Just ordered mine, so happy I found this video 🙌
@vinjkdiesel3122
4 жыл бұрын
That has to be the easiest & cheapest install vid you ever did brah 🤙🏽🤙🏽🤙🏽🤙🏽🤙🏽
@johnhansen3298
4 жыл бұрын
Great product...👍🏻it’s on my wish list, to install on my wife’s new gladiator, AWESOME VIDEO, watch and like all your videos, good job great channel and information! 😃🤙🏻
@davidcrawford7902
3 жыл бұрын
I would love one for my 2011 JK, Thanks!
@andrewmason1111
4 жыл бұрын
Nice video Ben! I want to personally thank you for finally explaining in detail how the PCVsystem works. I ordered the plug and play model from your link, thank you again! And say hi to Cassie for me! The North East sure missing you! But you gotta go to Texas. Just as long as you dont become Dallas Cowboys fans! Lol!
@damonvibbert2933
4 жыл бұрын
Love this idea. Makes sense to separate the oil out to eliminate issues!!! Count me in on the giveaway!! You two are great!
@chrisreports9031
4 жыл бұрын
Awesome video and useful content and budget friendly 👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏✌️
@markp9474
4 жыл бұрын
Great video! Count me in on the catch can giveaway... need one for my el camino LS swap! thanks
@edwardluciano6885
3 жыл бұрын
I just got a beautiful black miniature lab. Any dog hacks for taking them off roading with the fam? I think that would be an awesome, unique video!!!
@tooslow1976
4 жыл бұрын
That is such a good idea. I have found my next modification for my JKU
@herbscott11
4 жыл бұрын
Count me in on the catch can give away. Keep them videos coming!
@oscarpatino330
4 жыл бұрын
Thanks for the video Buddy.... i love all of them, you've been an inspiration for me.... keep up the good work as well Cassie's channel....
@JKGearandGadgets
4 жыл бұрын
Thank you!
@oscarpatino330
4 жыл бұрын
@@JKGearandGadgets always… stay safe!
@smyerpropertiesllc3858
3 жыл бұрын
Great option. I’m going to do this to all my vehicles! Keep em coming
@zyt2785
4 жыл бұрын
Love your channel! One of the BEST on YT for Jeepers. Please count me in the give away!
@davidwilkerson42
4 жыл бұрын
hey Ben keep up the great work. your videos have help me in my build. I have a 2009 JKU on 37 's I love it. so glad y'all moved to Texas. we are in west Texas hope to meet y'all in person some time. Thanks again
@royreedy3714
4 жыл бұрын
I would love to try this on our 2000 TJ. Love the information in your videos
@Bennett-xo6iu
4 жыл бұрын
You guys are doin such a good job on both your channels.. keep the videos coming...
@JonnyBgooD007
4 жыл бұрын
What are the odds, I was just looking to buy this. Specifically the RIPP Supercharger Brand, being that it's on sale. Great video man!
@JKGearandGadgets
4 жыл бұрын
Dont forget that the code Jkgear will get you a 12% discount!
@JonnyBgooD007
4 жыл бұрын
@@JKGearandGadgets that's right and will do! Thanks for the heads up 🍻.
@ArdisticCustoms
4 жыл бұрын
You can throw my name in there as well. I need one for my wife’s JL and then one for my LJ. It would be nice to only have to buy only one....lol. Love the videos, both of y’all keep up the awesome work!!
@owenwest2402
4 жыл бұрын
I'm so needing to do this cheap easy mod when I do the rebuild on my 4.0 288k no catch can and it shows! 😆
@MrHotrodder1964
Жыл бұрын
Change oil often, every 3,000 to 5,000 miles, us a high quality synthetic, like Amsoil or Royal Purple.. will make a big difference. I put an oil catch can on my 2019 Silverado, hardly any residue on two oil changes. On the right track.
@richardalderson1868
4 жыл бұрын
I'd like to be entered or something, lol. It would be my first engine type mod for my JL Willys. Keep up the great works and as always enjoy yours and your wife's videos.
@molonlabe4240
3 жыл бұрын
I too, like to be entered in something...But yeah I'm going to install the can.
@tymekiller88
4 жыл бұрын
Enter me in! This will be going in my 18jk forsure!
@corbind.9395
4 жыл бұрын
Looks super easy. Wouldn't mind installing one myself! Thanks for the show how.
@jeffwhitaker6743
4 жыл бұрын
Everyone saying they want to be entered or somethin........ Enter me too please, another great install video by the way!
@moabwheeling
3 жыл бұрын
Heck yeah I would liked to be entered Ben . I would use it either on my wife's 07 JK or my 03 TJ . Thank you for sharing your experience with using one . Take care and be safe guy's .
@randomcrafts4623
4 жыл бұрын
Been thinking about getting one for my JL. Count me in please.
@Charles-m3t
3 ай бұрын
You still need to check your Pcv valve every 30000 miles because of seal wear on Pcv that rides on the cam shaft that will allow allot more oil to intrude past into your catch can. Just changed Pcv valve at 58000 on a 2019 Ram 1500 and seal was worn out .will be looking into catch can Thanks Jk gears and gadgets
@daughertypb3663
4 жыл бұрын
Enter me. Great idea. Great video, as always. 👍
@southernstar_offroad
4 жыл бұрын
Definitely need one for my JK. Also it was cool meeting you at Clayton's!
@larrybain1
4 жыл бұрын
Yukon Oklahoma Checking in. I gotta get me one of these.
@ericfick4294
4 жыл бұрын
Great video......put me in the running for a catch can setup
Пікірлер: 1 М.