Hahaha "what does this have to do with my robot? almost nothing but it sure is cool" Thats how you know you have a good robot name!
@Ankow99
3 жыл бұрын
Well maybe you could say that his robot is like a wedge and once the opponent gets on his back he transforms to a flipper and sends them flying? I don't know lol hahaha
@alexsalchemy
Жыл бұрын
Exactly. What does my horizontal spinner have to do with "Cheesecake"? Umm... well, sometimes you can get Oreo cheesecake, and it's like.... kind of the same colors I guess.... lol.
@RobertCowanDIY
5 жыл бұрын
awwww. You're welcome David. Keep it up! Nice video.
@niIIer1
20 күн бұрын
no 150g co2 flippers? I thought there were. Maybe they just used compressed air.
@quinnfarquharson7638
2 жыл бұрын
where can one source a solenoid capable of these pressures?
@datguy8805
5 жыл бұрын
Maybe make a spatula interchangeable with a sort of wedge cover like tanshe.
@automaticprojects
5 жыл бұрын
Great video. Just found this channel from Robert’s.
@Smokin_Snowman
4 жыл бұрын
I saw kelpie in Robert Cowans video and I absolutely loved it. The design is just fantastic, I love that such a small bot has so much power lol.
@viniciusmamedereis7407
4 жыл бұрын
Nice project! I would like to ask: where can I get some ram like that? I am studying a lot about BattleBots in this quarentine and I'd like to make a hobbyweight flipper bot
@Lumakid100
4 жыл бұрын
Out of curiosity, do you plan on making a fairyweight pneumatic flipper?
@Micuss6
5 жыл бұрын
awesome little bots would love to get into these. Used to love watching them all on robotwars as a young kid
@TeamSmallRobots
4 жыл бұрын
You totally should! What country are you from? You can try searching RobotCombatEvents.com for an event close to you.
@olisk-jy9rz
Жыл бұрын
This is NOT "the world's smallest full pressure flipper". There are fully functional 150 gr. full pressure flippers. Well before this one.
@TeamSmallRobots
9 ай бұрын
Sorry for the late reply. When I say "full pressure", I'm referring to unregulated co2 straight out of a cartridge at ~800psi. Pneumatic bots like Anticide do not run unregulated co2 systems, they use low pressure air.
@neonism-
Жыл бұрын
"Freedom Units"
@ethankurtzvideos
4 жыл бұрын
Hello, Team Small Robotics for someone wanting to build a pneumatic flipper as awesome as yours. Would you mind sending links to the parts of your pneumatic system thanks so much!
@Combatechist
3 жыл бұрын
Title's a bit misleading as different weight classes have different full pressures. There was a robot called Anticide from the UK which weighed 150 grams and could operate at 190psi (the maximum allowable in UK ant weight competitions is 100psi). The heavyweights used to be limited to 1000psi but that might have changed in recent years. I'm impressed regardless.
@TeamSmallRobots
3 жыл бұрын
Nothing misleading about the title. Anticide is not a full pressure co2 flipper. It isn't even a co2 flipper.
@iamionscat9035
2 жыл бұрын
@@TeamSmallRobots Correct! If anyone thinks TSR (LOVE the homage to the creators of D&D) isn't telling the truth, you should look up Anticide's publicly published stats, you don't even need to ask Andrew (Anticide's builder) about it. Anticide uses a CO2 cartridge, but Andrew uses compressed air (from an air compressor he brings to events with him) to charge it. I love Anticide, I love 150g bots. I think Kelpie is awesome!
@Combatechist
2 жыл бұрын
@@TeamSmallRobots Maybe one year on I have an opportunity to learn. It doesn't mention CO2 in the title, so I presume the definition of pull-pressure implies the use of CO2. My understanding was that the definition of full pressure was using the maximum pressure allowed by the rules in the container directly - rather than through a regulator. What is the definition?
@TeamSmallRobots
Жыл бұрын
@@Combatechist Good point. I've updated the title to include "co2" in the name.
@soaringeagle175
3 жыл бұрын
We need Kelpie vs. completely redesigned Psychotic Break.
@VestedUTuber
3 жыл бұрын
An event that wouldn't allow an unstick for getting stuck on the arena on your own? Not sure how I feel about that.
@Lumakid100
5 жыл бұрын
1. How much do the full air tanks weigh? (As in full of air) 2. I didn’t know you were on Kilobots. 3. Can you make a build tutorial for a beetle pneumatic flipper (buffer tank included)? (If this isn’t one.) 4. Dying against The Butcher (Kilobots) is completely understandable. That thing’s deadly. 5. Can you make event reports of Kilobots and the other competition?
@TeamSmallRobots
5 жыл бұрын
1. A full 20g co2 cartridge weighs about 2.5 oz 2. Yup! It was Kelpie's first event there 3. A full pressure co2 system is too expensive, dangerous, and complex to be worth making a tutorial video. Buuuuuuuuuut, I do plan on making a beginner-level pneumatics tutorial for an antweight 4. Yes it's very scary! Hence the reason I spent most of the match hiding behind hazards. 5. Possibly. I have a large backlog of event reports I'd like to catch up on. The biggest non-kelpie updates would be my featherweight Morag which I still need to make a video on as well as the new version of Highlander that's now 3d-printed and took 2nd place at GearJam!
@Lumakid100
5 жыл бұрын
Thanks for the reply.
@Lumakid100
5 жыл бұрын
Out of curiosity, what is Morag’s design based on? Apollo, Eruption, Bronco, or Hydra? Edit: You might want to add some ARMor.
@TeamSmallRobots
5 жыл бұрын
@@Lumakid100 None of the above :P (Especially not Hydra since it didn't exist at the time I built Morag). The biggest inspiration for it would probably be Rocket (Lightweight) and Polaris (Featherweight). As well as taking what worked for Highlander and scaling it up.
@iamionscat9035
2 жыл бұрын
@@TeamSmallRobots Did you ever publish your antweight pneumatic tutorial? I don't use Facebook and never will (never say never, but... never.), so if it is there, I might have to beg someone I know who uses it.
@cornmaized
3 жыл бұрын
just wanted to say i ADORE this robot
@antweightzrobots6094
4 жыл бұрын
Thanks for sharing the technical details, and the awesome match!
@codywalkey9378
2 жыл бұрын
Where did you purchase the Co2 ram? I have been searching every where for it.
@TeamSmallRobots
2 жыл бұрын
As covered in the video, it's my own custom design. Not an off the shelf product.
@TheLegacyofHitchcock
5 жыл бұрын
Great little robot. Now that you've mentioned the origins of the name, I actually think that it's quite fitting (while being cool of course): I can imagine opponents first looking at Kelpie and thinking "Okay, fighting a lifter. He might get under me a few times, but I should be able to wear him down with some continuous attacks. As long as I don't get near a pit, I've got a shot". So Kelpie "lures" other robots in, unaware of its true nature. Then BAM! It turns out that this tiny thing is a bona fide full pressure flipper, and can launch its opponents Oota. It sinks others just as the beast does to its riders.
@Dia1Up
2 жыл бұрын
Sooooooooo, CO2 hammer bot?
@tiantian329
4 жыл бұрын
Looks promising! Do you know the exact brand for the pneumatic piston you used for the flipper?
@TeamSmallRobots
4 жыл бұрын
As mentioned in the video, it's a custom piston of my own design.
@tiantian329
4 жыл бұрын
Got it. Thank you.
@AlecM.
5 жыл бұрын
Loved the video! I hope we get a chance to fight sometime. Are you by any chance going to the Nov. 23rd competiton?
@TeamSmallRobots
5 жыл бұрын
Still up in the air about that one. (heh, flipper jokes) I'm looking into renting a new place soon and that may sap my travel funds.
@AlecM.
5 жыл бұрын
@@TeamSmallRobots Well I hope I get to see you there :)
@amist98
4 жыл бұрын
Sorry if a dumb question, do the pneumatic parts screw together with standard fittings or do you have to modify them to make them fit together airtight?
@TeamSmallRobots
4 жыл бұрын
Any NPT fittings need to be wrapped with PTFE tape or else they'll leak. And make sure they'll rated for the pressure you're using so that nothing explodes in your face :)
@amist98
4 жыл бұрын
@@TeamSmallRobots Thanks for replying! ok so I should get parts with all npt fittings? And PTFE tape obvs. Is npt the most common?
@kittka
5 жыл бұрын
Can you share the specs/sourcing on the solenoid? I've had a hard time finding solenoids that handle more than 250psi
@teamalreadybroke795
5 жыл бұрын
It is a Nitrous Purge Solenoid. We were running a Nitrous Solenoid at Motorama and gave him the idea. I never would have guessed he would have put it in a 3lb bot though - pretty neat. :-)
@TeamSmallRobots
5 жыл бұрын
The idea was inspired by Flange. I asked around on the FRA forum back in 2018 what Flange used. It is indeed a nitrous valve.
@themechanix393
5 жыл бұрын
Thanks for the awesome video! Could you make a video just on the pneumatic system in the future?
Пікірлер: 53