Hi, I need an important information about kemei 1990 oil lubtification. When I remove screws I just have to put some oil there on the small groove on the metal blade, or there should be like a fiber piece that have to be filled with oil(not sold with the item) ? Because my problem is that the oil indicator let always shows its finished, also while I just added it. Thank you so much for your help!
@danzerako
4 жыл бұрын
Please help!! Where i can buy springs of these??
@pravinwagh6408
Жыл бұрын
इस मशीन का ब्लेड कहा मिलेगा कृपया बताईये नया ब्लेड चाहिये कॉन्टेक कहा करे
@shivakushvah4371
2 жыл бұрын
Bled kha se laye sir
@asaduddinchoudhury5039
3 жыл бұрын
Andor ka spring kulke lagai ye plz
@JMacomber
3 жыл бұрын
Nice video!! You only need to change the cutting blade not the top blade correct?
@benboud7971
3 жыл бұрын
Correct!
@broskillzjavier8052
4 жыл бұрын
also where can i buy the blade ?
@benboud7971
3 жыл бұрын
eBay
@JeetMathias
3 жыл бұрын
Where can I buy the entire blade assembly set for Kemei KM5017?
@amanverma8237
3 жыл бұрын
Hey buddy where to get these blades...provide any link or site
@samsungnexusnick
4 жыл бұрын
Wahl 8591 and Kemei 2600 blade be shared?
@benboud7971
4 жыл бұрын
葉葉 Yes
@chamakdewan7497
4 жыл бұрын
Great video!! Hey can i use generic wahl blade with kemei 809a model too?
@benboud7971
4 жыл бұрын
chamak dewan yes you can, I will be doing a video on that soon, very simple to change
@chamakdewan7497
4 жыл бұрын
@@benboud7971 Thanks you for your response. Be waiting for the video.
@chamakdewan7497
4 жыл бұрын
@@benboud7971 btw what do you think about Kemei Km-809a as a product overall? Is it good?
@benboud7971
4 жыл бұрын
chamak dewan it’s not too bad, I thinks not the most powerful clipper but very light, makes cutting hair all day less stress on the wrist
@sakurosozac6605
3 жыл бұрын
@@benboud7971 i got the 809a because u said the wahl blade fits but when i put it on the blade moves up and down how fix this?
@emelsonkhongbuh6971
4 жыл бұрын
Is this blade fit for kemei 809a? Where i can get this blade?
@AhmedAli-iv7qf
4 жыл бұрын
When the battry get empty . Can it work with cable directly or not .
@benboud7971
4 жыл бұрын
Ahmed Ali yes it works with cable in ad out
@AhmedAli-iv7qf
4 жыл бұрын
Ben Boud thanks much
@ELEVOPR
4 жыл бұрын
Yes, but instructions clearly state if battery is fully drained, let charge for 1 minute before turning power on. This is so some juice can fill the battery for that one minute. Kind of like buffering a video and giving it that one minute buffer gap.
@benboud7971
4 жыл бұрын
EL EVO well said 👍
@hpcooks23
4 жыл бұрын
What's the reason for changing the blades to wahl blades and which wahl blades did you use?
@benboud7971
4 жыл бұрын
Harman Pahal I use the wahl taper blade, good for fading, the quality of blade is a lot better than the original Kemei.
@broskillzjavier8052
4 жыл бұрын
you recommend this clipper ?
@benboud7971
4 жыл бұрын
BroSkillzJavier buy the blade and clipper from amazon and I highly recommend this product
@sakurosozac6605
3 жыл бұрын
do they get loud after swap? some people say this thats why i havent bought some. i was thinking of buying the Kemei 1986 on sale on amazon rn for 25
@benboud7971
3 жыл бұрын
Firstly the km809a are a lot better so I recommend getting them. Also if you replace blade correctly oiling the inside aswell as the blade then you will continue to get a nice clean sound 👍
@sakurosozac6605
3 жыл бұрын
Ben Boud ty
@myphones5466
4 жыл бұрын
is there any new clipper that can be modified easly that you reccomend ?
@benboud7971
4 жыл бұрын
MY PHONES modified in what way
@myphones5466
4 жыл бұрын
@@benboud7971 wahl blade for example
@benboud7971
4 жыл бұрын
MY PHONES ide say Kemei 809a personally, people won’t agree with me but I’ve tested nearly all Kemei products and this for me lasted the longest. But bare in mind the motor isnt that powerful
@Aalitolito
4 жыл бұрын
Where can I buy a replacement blade for km 1997
@benboud7971
4 жыл бұрын
Nico Yao Wahl blades fit on them. Yo can find them on Amazon/ebay
@xHustleHaRdx
4 жыл бұрын
What kind of walh blade do I use?
@benboud7971
4 жыл бұрын
Daniel Roman taper blade! I’m not a fan of the fade blade
@xHustleHaRdx
4 жыл бұрын
@@benboud7971 can you send me a link for the blade because there is to many wahl blades thanks
@benboud7971
4 жыл бұрын
Daniel Roman www.ebay.co.uk/itm/313112991799
@kalopaidi10
4 жыл бұрын
Could i use walh guards for my kemei?
@benboud7971
4 жыл бұрын
manos moutzouris yes
@danzerako
4 жыл бұрын
Where i can buy those springs inside please help
@benboud7971
4 жыл бұрын
Is it the tension spring that looks like the letter “M”?
@danzerako
4 жыл бұрын
@@benboud7971 yes thats it. I accidentally lost in
@benboud7971
4 жыл бұрын
Daniel Rugay you should buy new clippers. You can only get them from Greece as the spring are manufactured there. Will cost £20 all in for a tiny spring!! I know it’s ridiculous!
@danzerako
4 жыл бұрын
Thank you so much. But luckily i found it already. Its a great relief. Lol thanks thou
Пікірлер: 59