Just got a "new" (hand me down) TM-241A from a fellow ham. I love it! Still learning the bells 'n' whistles, but very happy w/ it so far as a new base station.
@Radionut63
2 ай бұрын
Great to hear!
@DuvalDashCams
3 жыл бұрын
Absolutely love my Kenwood Tm241.. been an excellent radio.. KO4RTO
@Radionut63
2 жыл бұрын
It is a decent radio, till the connector fails.
@GeorgeGardinier
6 жыл бұрын
this is just like mine in the car, my display went also, sent it to durham radio and is working well now. mine is used every day when the car is running, good job Darrell
@Radionut63
6 жыл бұрын
thanks George, i will do another update if the LCD goes bad again.
@GeorgeGardinier
6 жыл бұрын
yes yes i had to tap mine before the screen quit, now it is fine, i will follow you on this for sure, you are the man
@Radionut63
6 жыл бұрын
Hey George, got another video for you about the TM-241A, This next video is wiring up the microphone to the radio. ;-)
@josephroblesjr.8944
3 жыл бұрын
I have one of these and it is a pretty solid radio for what it is
@Radionut63
3 жыл бұрын
I gotta get mine back on the bench... the internal connector for the front panel is garbage. Gotta run ribbon cable and rid of it.
@Doonit_hard_way_since_65
7 ай бұрын
A bit too late... like 5 years, but if you have this display hash, and your radio acts like this, it is the memory backup battery most likely. It's a CR2032 with 180 degree tabs, mounted + side toward the CBA, on the back of the faceplate/display CBA. It's a pain to get to, but an inexpensive fix. New battery should last 5 years or so disconnected, longer if the radio has 13.8 connected. They are shock sensitive because the battery is dissolving itself internally. Can be a great used radio buy if no one has gotten into it and butchered it thinking they had a bad display.
@Radionut63
7 ай бұрын
In my case, it is the connection between boards that is the problem, needs to be either replaced or jumpers installed.
@Doonit_hard_way_since_65
7 ай бұрын
@@Radionut63 I have heard of a couple of radios with the connectors pulling off the boards completely when disassembling them. I can see that connector failing.
@cottenmouthsnake
4 жыл бұрын
If the lcd keeps messing up like that take the front off and clean the “zebra stripe” conductive rubber thing between the lcd and the lcd driver pcb. Just use some alcohol or board cleaner and a cue tip on the pcb and the rubber piece and it should stop messing up.
@Radionut63
4 жыл бұрын
Hooked mine up the other day, first time since i fixed this thing, now it power up.. LOL Talk about a contrary radio! LOL
@ignacioleonardo8500
3 жыл бұрын
a tip: you can watch series on flixzone. Me and my gf have been using them for watching all kinds of movies recently.
@okhamradio
3 жыл бұрын
This is very interesting device
@marceloandrade-ideiasempra2638
Жыл бұрын
My radio is open to airband but I don't know why I can't do more. Is there any programming to be done? Can I help me?
@Radionut63
Жыл бұрын
This radio will receive airband but it will not transmit in that frequency band.
@JULIOCESAR-oh7gv
3 жыл бұрын
consulta, donde puedo manipular el squelch desde la plaqueta , porque el botón se me rompió query, where I can manipulate the squelch from the board, because the button broke
@Radionut63
3 жыл бұрын
Can only be changed with the control as far as i know. If this was a commercial radio you could program a button to change the settings. But with this radio, i don't think so.
@JULIOCESAR-oh7gv
3 жыл бұрын
my potentiometer broke squelch ,, is there a way to cover the noise of some preset? se me rompio el potenciometro squelch,, hay alguna manera tapar el ruido de algun preset?
@Radionut63
3 жыл бұрын
Can only be changed with the control as far as i know. If this was a commercial radio you could program a button to change the settings. But with this radio, i don't think so.
@camilleroch4495
5 жыл бұрын
I got the same thing here then it comes back !
@gilmarlimavoador8429
5 жыл бұрын
Hi friend, good afternoon, I would like to know if the friend has the information on how to extend the frequency range of the TM-261 Kenwoon radio, considering that it only transmits to'pos 144mhz. thank you
@Radionut63
5 жыл бұрын
forums.qrz.com/index.php?threads/kenwood-tm-261a-only-fm-band.481151/ Please note: I will not be held responsible for any damages that you may do to your radio equipment, nor any legal ramifications you may suffer by performing any modification you may attempt to your radio equipment and that You have sole responsibility for your actions.
@r.w.leblanc6326
6 жыл бұрын
Congratulations i bet that loose CAP was the colprit why the screen messed up isnt it great when all u need to do is lay your hands on the macine and it works
@Radionut63
6 жыл бұрын
Hopefully between that and the wire, it will be AOK now. :-)
@nanangarifin7908
Жыл бұрын
Good morning, can give me tutorial for make down frek until airband seem this video, cause my radio tm241A frek Only FM 136-174, tks very much 73's FM YC7NNM (Indonesia)
@djarisumarsono9851
3 жыл бұрын
Cara mengoperasikan dari 148460 ke 148461
@tigerleo1395
4 жыл бұрын
Minta tolong bagaimana caranya mengreset TM 241 a tidàk bisa kepala enam keatas pak.
@Radionut63
4 жыл бұрын
Metode Reset Penuh 1: 1. Dengan OFF transceiver power, tekan [F] + [] (Power) Minta tolong bagaimana mengreset TM 241 a tidàk bisa kepala enam keatas pak
Пікірлер: 41