Hi, do you know if this particular LCD model display can show the voltage and current display when using the battery? I'm not referring to P03 in the setup - but actually when using the bike to gauge the battery juice? I know the M5 can do this - but they seem to have swapped that mono LCD screen to this one, and I have a suspicion that some functions are no longer on this model display compared to their earlier generation.
@reggiebannister1080
26 күн бұрын
i have the same display but on a ehora juliet.. could you find them for mine? please
2 ай бұрын
in option 14 of display, you can pick the max ah the controller has ? or should i put in option 14 display, the amp's from the battery ? that is 52v 20a what do i need to put in the display settings ? what does it do if i put it on 15a and what happens if i put it on 40a ? Greets, jorn
@GeorgeSauers
7 ай бұрын
How can I get a copy of the Display Users Manual?
@Mark_B544
Ай бұрын
Different from the K800 pro in case anyone is wondering
@theneuron
17 күн бұрын
WTF, what do I do to see anything on this video? All I can change on my display is the Pedal Assist Level, the speedometer reading, and the trip. How do I get the book he is scrolling through too fast for me to read?
@mEmE-sd9jz
7 ай бұрын
Can't thank you enough for posting this I love the bike, but it came with literally no instructions whatsoever. I was looking for some instructions on removal of the rear wheel the de-railer and replacement of them. I had to remove the rear wheel to replace the inner tube. Do you know where any of that can be found? Thank you in advance.
@MrSpubby
7 ай бұрын
I have no clue... Thanks for the kind comment and good luck!
@Mark_B544
Ай бұрын
You don’t remove the wheel to change the tube, just loosen one side
@kylependola8587
11 ай бұрын
This is for the 1000W, NOT the AWD Dual Motor 2000W version of the bike, correct? Both are K800, but they are different models entirely.
@MrSpubby
11 ай бұрын
Yes
@MrSpubby
11 ай бұрын
I changed the title of the video......didn't know they were different, Thanks!
@kylependola8587
11 ай бұрын
@@MrSpubby No prob. I have the 2000W and I screwed up the settings. I'm trying to find the default ones myself. Not doing too well.
@marvlb
10 ай бұрын
Did you find any instructions for the 2000 watt? I can’t find anything anywhere!
@MrSpubby
10 ай бұрын
nothing..............try getting a hold of Keteles USA, see if they can send some pict's of the setting's off a bike they have....I went back and forth with china about a bad battery I got with it and asked them about the settings. They sent me all those pict's.. they might do it for yours. They also sent me a new battery....It' a good company, I think they'll help you. @@marvlb
@onetailgunner
11 ай бұрын
What color wire is the speed limiter
@Mark_B544
Ай бұрын
White
@federicagrassi5981
7 ай бұрын
qualcuno ha il catalogo uso compreso computer di bordo per la keteles kf9 ? Ringrazio anticipatamente a chi può girarmelo via email.
@gyulamagyar2811
4 ай бұрын
Dear Sir. I bought my Engwe e26 electric bike 2 days ago and unfortunately I completely messed up the settings. I can't reset the yl26c display. How can I reset or restore the factory settings? Thank you in advance for your help. Best regards, Gyula
@Mark_B544
Ай бұрын
This is a keteles
@hozerdude
11 ай бұрын
how do you unlock speed limiter?
@MrSpubby
11 ай бұрын
I have no idea, I'm just a guy who screwed up the settings , got this from Keteles and thus shared it with all of you.
@joaquimmoreira9858
10 ай бұрын
1 pressione e segure os freios dianteiro e traseiro por 10 segundos 2. abra o instrumento e pressione o freio direito por 20 segundos 3. ajuste a engrenagem para 5
@TheCvp33
10 ай бұрын
P01=003 (back light level) P02=000 (KMH or MPH) P03=048 (voltage) P04=010 (screen timeout 10 minutes) P05=005 (first number = when the motor helps 0 or 1, 5 = levels) P06=29.0 (tire size) P07=086 (? Not sure) P08=100 (speed limit in kmh) P09=000 (0 motor helps immediately when you peddle) P10=002 (0 is pedal assist only, no throttle, 1 is throttle only, 2 is both) P11=001 (sensitivity of peddle assist 1-24, 1 is the highest) P12=005 (intensity of power delivery 1-5, 1 is the most) P13=005 (number of magnets on crank sensor 5,8 or 12) P14=012 (max amp draw of controller) P15=38.0 (under voltage cutoff, 38v vs. 48v) P16=002 (reset ODO, hold mode button and ODO returns to 0) P17 = 00 (cruise control) P18 =01 (walk boost)
@hozerdude
9 ай бұрын
@@TheCvp33 These setting seem to be the same for my Keteles K800 DUAL MOTORS. Thanks :)
@MrCsebike
4 ай бұрын
It's 08p.
@nicholasglade4572
8 ай бұрын
I got the 2000w k800 pro and can't get it past 11 mph no matter what I do. Think I have to return the bike. Update. The company helped a lot. the bike is great.
@LeeSheran78
8 ай бұрын
Hello. To unlock the higher settings. hold left brake and m button for computer and turn the ignition key
@georgemichalakis8272
6 ай бұрын
@@LeeSheran78 hello can you be more specific please ? Step by step ?
@Mark_B544
Ай бұрын
@@georgemichalakis8272turn off, hold on brake lever and turn on. Keep holding brake lever for around 15 seconds. Let go and turn on to Pas5. Sorted 30mph
Пікірлер: 33