Spacebar so good it sounds like in the Lego game when you are building items
@thesurgeonkeebs9857
2 жыл бұрын
This is the best compliment I think I've ever gotten
@jammies701
2 жыл бұрын
I sure do love the U4’s
@thesurgeonkeebs9857
2 жыл бұрын
They really are something special! I need to get another batch
@ElasticoOFCL
2 жыл бұрын
Oh hey, we share the same board and keycaps! I just use Durock T1 POM sunflowers switches, PC plate and using the same gateron stabs what the board is included with (Just that I reapply the lube since the lubing application could've been better). Also added some Foam pads from KBDFans for both the stabs and switches. I also tape modded the PCB (4 layers of Masking take and an electrical tape at the middle of the layers) and added some 1mm and 0.5mm thick PE foam. The bounciness is barely there but the sound profile is pretty amazing! Also, I never thought of using scrap of switch films as a force break material. Glad I saved those Foam pad scraps so I can try them out cuz I use electrical tape or rubber tape for force break mod ^^;
@thesurgeonkeebs9857
2 жыл бұрын
Sounds like you have great taste, friend! I'm usually a linear guy, but I wanted to try out the Bobas. I always do the holee mod on stabs, and, honestly, it's easier to just buy new ones than to desperately try to clean the factory lube off of the stock ones. I didn't PE foam this one because I LITERALLY just added it to my last board, but I'm probably going to go back and tape mod it. I'll probably try out masking tape for force breaks just to see if it's any better than the film scraps. Thanks so much for checking out the video!
@ElasticoOFCL
2 жыл бұрын
@@thesurgeonkeebs9857 Oh yea, I only try out Durock sunflowers (I do have the Boba switches and they're a bit more thocky the the sunflowers) cuz I wanted to try out Tactiles more since I'm a clicky guy. I try holee modding the stabs but it won't stick for some reason (Probably cuz I didn't clean out the lube before drying it)
@thesurgeonkeebs9857
2 жыл бұрын
@@ElasticoOFCL yeah you really have to get the lube off otherwise nothing sticks. Too much trouble 😂
@ElasticoOFCL
2 жыл бұрын
@@thesurgeonkeebs9857 yea, I didn't know that until I looked it up ^^;
@botbeamer
2 жыл бұрын
For the sound, try silicone mod, or add more foam, or you can also try to fill the keycaps with foam to dampen a bit of that sound.
@thesurgeonkeebs9857
2 жыл бұрын
I never thought of silicon! I plan on revisiting this after a couple more builds, and the tape mod plus some foam for the space bar are 100% on the list. I’ll have to look into the silicon, though
@botbeamer
2 жыл бұрын
@@thesurgeonkeebs9857 Aight! I'd like to see a video of the difference in sound once you get to it ! :-)
@thesurgeonkeebs9857
2 жыл бұрын
@@botbeamer I think I can make that happen!
@botbeamer
2 жыл бұрын
@@thesurgeonkeebs9857 I want to make a similar keyboard, but I'm waiting for the Q3 TKL since I realized it's going to come out in Q1 2022. Also going to use the silent Boba U4s cause the U4T sounds pretty "thocky" (loud) in tests.
@botbeamer
2 жыл бұрын
@@thesurgeonkeebs9857 check out the Domikey keycaps, really high quality and pretty cheap compared to GMK
@Clackbait
2 жыл бұрын
Nice video bro! Really solid commentary. 👌
@thesurgeonkeebs9857
2 жыл бұрын
Thanks! Really appreciate it!
@k-lawn
Жыл бұрын
Keychron Q1 keyboard, Focusrite interface, Hazy Little Thing, and a Rubik’s Cube. Are you me?
@thesurgeonkeebs9857
Жыл бұрын
Sounds like I just might be 😂
@biskitboi2476
2 жыл бұрын
I really like that deskmat!
@thesurgeonkeebs9857
2 жыл бұрын
Thank you! It was a GB from late 2020, and I just fell in love with it the moment I saw it.
@niceup1177
2 жыл бұрын
Hazy Little Thing ... good beer!
@thesurgeonkeebs9857
2 жыл бұрын
You're the first one to say anything! Haha it's 100% one of my favorites!
@davidsugiarto2780
2 жыл бұрын
im getting Q1 today, and i heard some interference issue with some keycaps, im planning to get akko bred keycaps i wonder do you get that issue with akko keycaps? thanks in advance.
@thesurgeonkeebs9857
2 жыл бұрын
The Q1 has south facing switches which already cause almost zero interference issues. The Bred keycaps are ASA profile just like the Wave caps on my board. You shouldn't have to worry at all about interference! Enjoy your build!
@mamatonett8118
2 жыл бұрын
Looks good. I like your cable and your desk mat. Though the sound is a bit clacky for me.
@thesurgeonkeebs9857
2 жыл бұрын
Thanks you! I still rock the deskmat, but the cable has unfortunately bit the dust. I agree with you about the sound. The taller sculpt of the keycaps resulted in a higher pitch acoustically when paired with the U4Ts. I’ve actually gone back and tape modded this! Just need to put together an update video.
@themechanicalrabbithole9041
2 жыл бұрын
The Q1 factory stabs work well in the GMMK Pro
@thesurgeonkeebs9857
2 жыл бұрын
I never thought of trying them! I just ordered an updated plate and some Durock V2s for mine though. Finally getting rid of those “GOAT” stabs 😂
@themechanicalrabbithole9041
2 жыл бұрын
@@thesurgeonkeebs9857 I gave the goat stabs a try but kept getting a phantom tick
@thesurgeonkeebs9857
2 жыл бұрын
@@themechanicalrabbithole9041 Same here. No matter what I've tried the tick always came back.
@osuventi4636
2 жыл бұрын
Why can't I thumbs up the video
@thesurgeonkeebs9857
2 жыл бұрын
uhhhh great question. I didn't turn off likes/dislikes. You should be able to
@pokeandcoke6710
2 жыл бұрын
nice video really liked the quality on these videos, btw is it just me or does your voice sound like your talking in the news or smthing?
@thesurgeonkeebs9857
2 жыл бұрын
Thanks so much! I would have said that about my voice, but I think we all cringe at the sound of our own voice 😂 I really appreciate all the kind words 🖤
@lennoxtan9226
2 жыл бұрын
Hi. The asa profile keycap won't interference with the top casing?? Especially the top row.. I'm having that issue
@thesurgeonkeebs9857
2 жыл бұрын
No interference on my end! Double check to make sure the plate is aligned properly with the case
@rydmerlin
2 жыл бұрын
I think it will look better if backspace is the same color as the alphas :-)
@thesurgeonkeebs9857
2 жыл бұрын
I actually debated on which backspace to use for an hour! 😂 I ended up picking this one because I wanted more of that bright green, but the space bar was too much
@fesfa4445
2 жыл бұрын
Didn't you remove any of the two foam pads on the bottom? I read that removing one adds a lot to the flex, but I don't know if pinging starts again then
@thesurgeonkeebs9857
2 жыл бұрын
I left both foam sheets in the bottom, but I think I’m going to remove one when I go back and tape mod it!
@a.b2510
2 жыл бұрын
That deskmat looks sick! What is it?
@thesurgeonkeebs9857
2 жыл бұрын
It’s the Celestial Deskmat from a GB in early 2021! I saw it and instantly fell in love
@ecuadorian90
2 жыл бұрын
What keycaps were those in the beginning?
@thesurgeonkeebs9857
2 жыл бұрын
They're called "Gentleman" and found them on KPRepublic!
@dougfoster1913
2 жыл бұрын
Hey what’s the key caps??
@thesurgeonkeebs9857
2 жыл бұрын
They're the Akko Wave ASA keycaps! They were discontinued by Akko, but you may be able to find extra stock in third party retailers. Another viewer managed to find a set not too long ago!
@deadpersonisepic7618
2 жыл бұрын
yooo less goo
@thesurgeonkeebs9857
2 жыл бұрын
sheeeeeesh!
@happylittletrees8130
2 жыл бұрын
#12 :)
@thesurgeonkeebs9857
2 жыл бұрын
🖤🖤🖤
@robertpearson8546
2 жыл бұрын
I made the mistake of buying a Keychron K7. What I received was NOT wireless (no dongle included) and, when connected by USB cable, many keys did not work. When I asked Keychron for an RMA, they demanded that I send them a video proving that I had not falsified the results of their keyboard test. Keychron has ignored all my subsequent requests for an RMA and a refund. There are many reputable companies making keyboards. Before buying anything from Keychron, think! Do you want to give your money to a company that treats its customers this way?
Пікірлер: 57