Great tutorial! If you did it for a subscriber, warn him that second row of pins should be backwards, first row down, second up 1v ^16 :)
@ron.owensby
2 ай бұрын
Making it look nice is ... Nice. Making it CORRECT is IMPORTANT!
@jeffreyevans2947
2 жыл бұрын
When you placed the pins on the footprint, Pins 9-16 are reversed. 16 should be across from 1 and 9 across from 8. Pins go around the the chip counter clockwise.
@PlumPot
2 жыл бұрын
Hi Jeffrey, thanks for picking this up :) Seems like I had a little brain fart here. Will fix this. Thanks!!
@jeffreyevans2947
2 жыл бұрын
@@PlumPot no problem Great videos I need to build a couple items also Keep up the great work
@roscozone8092
10 ай бұрын
@@PlumPot Also missed it at 15:00 when opening Keri's Symbol, which had the pins correctly placed... Any news on the 'fix'? Ta
@user-tc3rh5qp3y
2 жыл бұрын
Thank you see you again
@tonyradice4166
2 жыл бұрын
Thank you. If there is one detail I would like is expanding on how through-hole part pads are handled (a) on inner layers and (b) for pour layers, ie: thermal relief or solid ? I will be looking for more information on the multi-layer pads. Cheers and Thank You again!!
@ruedesaugiers2959
2 ай бұрын
Great tutorial ! I'm a rookie with Kicad, so i made great use of your videos ! Would you explain how to create custom shapes through hole pad with Kicad ? Thanks again...
@maranata693
Жыл бұрын
really great and the best video about footprint creation! thank you!
@gameaholicaf7316
2 ай бұрын
nice explanation
@moniccax
3 жыл бұрын
thank you!
@PlumPot
3 жыл бұрын
You are welcome😁 hope it helps👍
@ModelSceneryTutorials
Жыл бұрын
How about making a video on making a footprint for a through hole component
@RixtronixLAB
2 жыл бұрын
Cool video, keep it up, thanks :)
@byronwatkins2565
2 жыл бұрын
Pins 9-16 are numbered backwards.
@PlumPot
2 жыл бұрын
Hi Bryan, Yeah😪 I need to come back and fix that. I think someone mentioned it before and I was suppose to pin that message. Thanks for letting me know though👍
@richardburgers8965
Жыл бұрын
I followed your informative video. I can connect Route tracks to my newly created footprint HOWEVER the track will not connect to any other components. It stops just short. Can you suggest anything? Thanks
@Antyelektronika
3 жыл бұрын
F.Fab is also important :)
@PlumPot
3 жыл бұрын
Good point👍
@filzli
Жыл бұрын
I'm aware that this is a somewhat old video by now, but I would have liked to know how f.fab is important. Other than that this was very helpful. I'm trying to create a footprint for an usb c type female SMD connector that I want to get placed by jlcpcb.
@limphomothae1351
8 ай бұрын
Nice video as always. However, I want to create a footprint for an NT72C-S10 which is a relay with 5 throughole pins. I cant find a matching footprint anywhere on the internet otherwise I'd simply use that. Thanks in advance. Benedict
@diags_1109
5 ай бұрын
any luck
@sreeyog
Жыл бұрын
Coool
@sourabhpatki477
3 жыл бұрын
Esp32 dev module with application (circuit)
@PlumPot
3 жыл бұрын
Hi 👋. Is that something you want a video off?
@moniccax
3 жыл бұрын
@@PlumPot yesss!
@KingWhiskers1
3 жыл бұрын
My only little gripe is that you are a bit fast in the showing of this and it is too quick for me. At least there is a speed control on you tube so I can slow it down. Otherwise an excellent tutorial though.
@PlumPot
3 жыл бұрын
Thanks for the feedback, will take note of that and slow down in next videos😀
@andydoddington2993
Жыл бұрын
Such a disappointment compared to other videos. Instructor speaks far too fast and unclearly. Also moves mouse all over the place making selections without explaining what he's doing. He clearly knows what he's doing, but I don't - that is why I'm watching the video!
@stuartpower6686
Жыл бұрын
How can it be a disappointment when he's doing this for you for free?
Пікірлер: 35