In this video we will service dead Kind shock KS i950 Hydraulic seat post and make it work again! Everybody can make this at home!
Thanks for watching! Hope you enjoy! Don't forget to click like button, write your opinion and SUBSCRIBE for more interesting stuff that I make for You!
Channel / axrv88
Follow me on Twitter / axrv88
Facebook page / axrv88
0:00 Вступление
0:47 Unscrew seal cap and remove dirt inside
1:24 Let's test it before disassembly.
1:57 Unscrew bottom nut
2:20 Pull out cartridge body with bushing ring.
3:11 Remove guiding pins. Be careful, not lose em.
3:46 Remove bushing, seal and dirt oil.
4:07 For unscrewing bottom red cap I use ring pliers.
4:28 Bushing looks good... It's strange.
4:48 Seal cap looks like new.
5:58 Unscrew cartridge cap with old trusty ring pliers.
6:21 Pull out cartridge shaft.
7:11 Add some oil inside of inner tube of cartridge for remove it with piston shaft. Little trick ;
7:24 Pull out cartridge.
7:37 Clean inside of cartridge body.
8:11 Install secondary piston but oil it first.
9:00 Install inner tube. Be careful, upper side has little bevel.
9:30 Oil bushing and seal inside of cartridge cap.
9:50 Push piston inside of inner tube.
10:04 Drain excessive oil and tighten cartridge cap.
10:43 Clean cartridge out of oil.
10:59 I use big syringe needle and 10 bar of air pressure.
11:27 WOW! It's working! Look guys!
13:00 Don't forget to install seal cap!
13:43 Install guiding pins on tube.
14:23 Add little bit grease.
14:47 Install and tighten bottom red cap.
Негізгі бет Ғылым және технология Kind shock KS i950 Hydraulic seat post service for everyone DIY
Пікірлер: 71