Hey man. Good to see you getting into Ultra. There’s some recommendations you might want to consider. First off all, it’s a good thing to make a separate model in your radio for your kiss and kiss ultra quads. You can see that your current model has the sticks not centered in the GUI. If you center sticks for beteflight, they are not centered for Kiss and vice versa. That’s why you want to have a separate model for Kiss setups. And calibrate your sticks so they show centered (1500) in the Ultra GUI. Second, it’s recommended to enable experimental mode, and use one of the presets for a V2 with experimental mode enabled. I would recommend the V2 exp default preset. This really gives the best flight performance on the Ultra V2. Then there’s some other minor things that are recommended, like using throttle scaling and soft arm. Also flight performance wise, definitely try setpoint weight and breaking factor both at 100, and try Acceleration Factor at 50. Also using some RX deadband is recommended, 10 on pitch and roll, and 20 for roll. TPA curve has another recommended setting then standard. Check the box to use custom TPS influence values, and setup the first row of numbers as 0 25 25 100 and the second row as 0 0 0 100. OSD can be set up for all systems, not only analog. O3 is the only one that cant use the pretty Ultra font unfortunately. And last, setting up the esc orientation, motor direction and setting props in and out is very easy using the motor wizard. I’m pretty sure you’ll get a better experience using these recommendations. Cheers Gboni.
@GBoniFPV
Жыл бұрын
I will definitely give it a try. I can't imagine the drone flying even better because it's actually flying great already l.
@EbrFPV
Жыл бұрын
@@GBoniFPV should make a difference still. Would love to hear back what you think of the extra Ultra goodness these changes will bring 😁
@serval_fpv
Жыл бұрын
Great info just installed my kiss Ultra mini and will try these settings .🙏
@robe2295
11 ай бұрын
What does "scaling" and "soft" Arming do?
@周小喬-y9o
8 ай бұрын
I use kiss ultre v1 with foxeer 65a ESC. The connection cable should be correct because the ESC self-test sound sounded 5 times. But the ESC cannot be recognized in kiss gui. what do I do? please help me
@GBoniFPV
8 ай бұрын
You should be using BLheli 32 pass-through . Just open Blheli 32, power on your drone, and connect the. FC to the PC
@FSAFPV
5 күн бұрын
Thx U Bro, for the tutorial..How much does the quad total weigh? (include TPUs, Bat)
@LehtusBphree2flyFPV
Ай бұрын
I just got a FETec stack and downloaded the kiss configurator V3.1.7 and need to know how to set this up. I can't find an updated version of the v3.1.7 or if it's all the same from one version to the next. I have the ERA frame with 6s motors. If like to use 4s motors with 6s batteries but I didn't know if there's a motor output limit or a profile to switch between the 2 4s and 6s batteries like BF has. Let me know how to set this up or just go by this video
@Monching24
4 ай бұрын
Hi GBoni, great tutorial! I was following your build as I'm going to build a kiss too! Just a quick question. Do you have any issues with you DJI O3 connecting to the FC's V Batt? I saw some recommendation is to connect the power directly to ESC power through a BEC... Let me know your thoughts. Appreciate man! Thanks.
@LennonZFPV
6 күн бұрын
Are you getting props in view on a GoPro?
@almostlate
Жыл бұрын
Dude. THANK YOU FOR EVERYTHING! Earned a sub for all of the series!
@alexanderfedorov7890
Жыл бұрын
Use less "advanced" motor wizard :) will make your wideo 5 min shorter ;)
@GBoniFPV
Жыл бұрын
I already got a lot of tips on setting the V2. I didn't realize there were so many features. The drone is flying as great as it is. Now, I understand I can even get to fly better 👏 👏 👏 👏
@NishantPinto
3 ай бұрын
Hi Alex, what should be the current divider value to use with Fettec 45A 4 in 1 esc? I'm using Ultra V2.
@alexanderfedorov7890
3 ай бұрын
@@NishantPinto none. use esc telemetry for voltage and for current. same on voltara.
@slogan9105
Жыл бұрын
nice work
@SallencioFPV
6 ай бұрын
How to set up angle mode?
@GBoniFPV
6 ай бұрын
i don't fly angle mode. I will need to look it up and get back to you
@jayzzz1234
Жыл бұрын
Great vidoe thanks for the info, that is a nice set up on the quad, i recently bought the APEX EVO non dc, i obviously want to try 03 but keep my V2 goggles, you put out some good ideas on trying different, components motors, etc, i noticed the go pro mount old APEX doesn't fit the evo luckily i got the steele version.
@jayzzz1234
Жыл бұрын
My shopping LIST is, t- motor G4 HD FC, t-motor Pacer 60amp v2 esc, rcinpower GTS v4 2207, 2040 kV, and the 03 air unit, and just stay on crossfire.
@GBoniFPV
Жыл бұрын
As for the go pro mount, it is available on thingiverse.com. Are you building a 6s or 4s setup?
@jayzzz1234
Жыл бұрын
@@GBoniFPV I got the Steele version EVO it comes with the gopro mount my old APEX mounts are different, going 6s
Пікірлер: 23