Really nice in depth box review Steve. Very concise and knowledgeable talk well done. Keep up the great work.
@SteveJonesScaleModellingSite
Жыл бұрын
Many thanks for the feedback Mike. I might have to try and do another kit review one day. Have a great weekend my friend and speak soon
@hillbillymodeling
Жыл бұрын
Great video Steve, and wonderful looking kit. I found it quite interesting how much the lower hull and suspension/road wheel sprues look like the ones in the MiniArt Valentine kit. Very interesting. Looking forward to seeing the build, stay safe my friend. Johnny
@SteveJonesScaleModellingSite
Жыл бұрын
Hi Johnny. I hope all is well my friend. The Bronco kit uses the Miniart kit sprues but the only common parts are the lower hull tub, suspension bogies and drive sprockets and some smaller hull details such as the exhaust, head lights etc. everything else is new The wheels are the previous Miniart wheels but with a different wheel pattern. Great to hear from you my friend and happy modelling
@joramamodellbau3987
Жыл бұрын
A rare vehicle and equally rare model. In 1/72, I don't know any kit of it at the moment. The Bronco kit in 1/35 makes a good impression and will certainly produce a great model with your skills. Ok, the tracks could be some work. In every case, have much success and much fun with it, Steve. Best wishes, Joachim
@SteveJonesScaleModellingSite
Жыл бұрын
Hi Joachim. Well I am sure you have worked out that I have not been around at all LOL. Today is my first day back in the YT community and I am enjoying catching up with all you old friends. You and Markus did an excellent job on the final video and my deepest thanks to you both. Looking forward to joining in the next GB when it comes around. I have done no modelling for the last three months and tomorrow I will be re-entering my model room and starting to get back to the hobby that I luv so much. Many thanks for your continued support and I look forward to speaking to you again soon. Happy modelling my friend!!
@joramamodellbau3987
Жыл бұрын
Hi Steve. In fact, I missed you and also saw that you hadn't made any comments to other model builders either. I had already considered writing you an e-mail to possibly check if everything is ok. I hear everything is ok and after a little break you're going to let your inspirations run free in model building again. I'm glad that everything is ok. See you again in KZitem, Steve. 👍 Best wishes, Joachim
@JeffDonahueScaleModeling
Жыл бұрын
Hi Steve, Nice review. This looks like a great kit. I'll be looking forward to seeing it built. Thanks for sharing. Have a great day. Jeff
@SteveJonesScaleModellingSite
Жыл бұрын
Hi Jeff. I am well into the build and having a lot of fun with it. I will upload the first build video soon. Many thanks for looking in and have a great weekend my friend
@panzer-meister
Жыл бұрын
Nice review Steve. As always, Bronco separated the parts extremely fine. Every parts look crispy. Thank you for sharing. Have a nice week end and stay safe my friend. Cheers, NOB
@SteveJonesScaleModellingSite
Жыл бұрын
Hi PM. If you like the review than I must be doing something right LOL. Many thanks for the supportive comments. Have a great weekend and speak soon my friend
@ThatMofoDamon
Жыл бұрын
A brilliant choice Steve! Kit looks wonderful, the only minor issue is the clean up of the tracks (totally minor issue). I will be looking forward for your build. Thanks for sharing, take care and keep up the good work my friend.
@SteveJonesScaleModellingSite
Жыл бұрын
Hi George. It isn't a minor issue my friend. It was a real pain in the arse LOL. I am doing a strictly OOB build otherwise I would have switched them out for Fruils. Speak soon my friend and have a great week
@davidchin350
Жыл бұрын
Nice unboxing of a unusual SP model. I hear Archers go faster in reverse than forward.🙂
@SteveJonesScaleModellingSite
Жыл бұрын
They certainly do David LOL A strange design but one that worked well on the battlefield. Many thanks for looking in and commenting. Speak soon my friend
@SPSteve
Жыл бұрын
Good overview, Steve, I've never purchased a Bronco kit so it was interesting to see what they look like. At 600 parts it should build into a nicely detailed model. I look forward to seeing this kit come together!
@SteveJonesScaleModellingSite
Жыл бұрын
Hi Steve. I have built a few Bronco kits now and yet to find a bad one. You get a lot for your buck and well worth their money. Many thanks for looking in and it shouldn't be long before I upload the first build video. Speak soon my friend
@scalemodelinc.6077
Жыл бұрын
Cool kit Steve, very nice overview of the kit! 👊👍👊
@SteveJonesScaleModellingSite
Жыл бұрын
Hi Corey. Hope all is well my friend. Looking forward to seeing how your SDKFZ 7 comes together. I wish you all the best with that build. Many thanks for looking in and commenting. Have a great weekend and happy modelling
@michaelhintzmikesminiature1812
Жыл бұрын
Cool looking tank. Thanks for the review.
@SteveJonesScaleModellingSite
Жыл бұрын
My pleasure Mike. Many thanks for looking in and commenting. Take care my friend and speak soon
@LarrysModelShop
Жыл бұрын
It's my first time seeing a kit by this manufacture. A bit over my head, but an awesome looking kit. Great review, Steve and I look forward to seeing how one of these is built. Subscribed!
@SteveJonesScaleModellingSite
Жыл бұрын
Hi Larry. Sadly I have been away from YT and modelling for the last three months. I have started the kit and I am hoping to post an update soon. I appreciate you looking in and subscribing. My apologies for the long time in answering. Happy modelling my friend
@tomatoes3
Жыл бұрын
Watching from behind the settee Steve , the mention of the part count and the tracks fills me with fear ! Hope your both well .J 😊
@SteveJonesScaleModellingSite
Жыл бұрын
🤣😂😅 Its not that bad mate - honest LOL. Even I have been struggling with some of the small parts. It certainly isn't for the feint hearted. I have taken the photos of the garden. I will try and get them over to you soon. Many thanks for looking in and I hope you and C. have a great weekend
@tomatoes3
Жыл бұрын
@@SteveJonesScaleModellingSite great, will look fwd to seeing them .
@mp-modelplastic
Жыл бұрын
Good video, very intersting subject in that kit, lots of detail and very good molds. Thanks for sharing. greetings from Portugal😉👋
@SteveJonesScaleModellingSite
Жыл бұрын
Many thanks for your comment and supporting the channel. Take care my friend and speak soon
@dvdw_graphics_crafts
Жыл бұрын
3:27 That's what scares me the most, but the end result looks much better than a whole-piece track XD
@SteveJonesScaleModellingSite
Жыл бұрын
I am having to do an OOB build on this one otherwise I would have replaced them with fruils. They have gone together well but very time consuming and very fragile. Thanks for looking in and happy modelling my friend
@dvdw_graphics_crafts
Жыл бұрын
@@SteveJonesScaleModellingSite fragile, yes, you touch one piece, it results in chain reactions. X')
@ModeliteDiorama
Жыл бұрын
Great overview of this kit! :)
@SteveJonesScaleModellingSite
Жыл бұрын
That's very kind of you to say. Many thanks for looking in and commenting. Take care my friend and speak soon
@thescalemodelcarguychannel8681
Жыл бұрын
Looks like a great kit Steve!
@SteveJonesScaleModellingSite
Жыл бұрын
Hi Shawn. It is indeed but I don't think you have any room left in your stash my friend LOL Thanks for looking in and have great weekend
@ramblers69
Жыл бұрын
Looks really nice Steve
@SteveJonesScaleModellingSite
Жыл бұрын
Hi Tom. How are you my friend. It is a great kit and well worth all the hard work needed to put it together. Have a great weekend and speak soon
@ramblers69
Жыл бұрын
@@SteveJonesScaleModellingSite Doing great Steve, enjoy the weekend buddy
@jimrafe3109
Жыл бұрын
An excellent review of what sounds like an excellent kit. No kit is perfect but some get close. Good to know the plastic is nice to work with considering the number of small parts. Shame about the wheel size issue, I don't know what your intentions are regarding them but I think I'd leave well alone. I look forward to your build.
@SteveJonesScaleModellingSite
Жыл бұрын
Hi Jim. Hope all is well my friend. I hope you are sitting down as I am going to do an OOB build LOL. Thats right no bells or whistles, no additions or improvements. Just gonna do what it says in the instructions. Basically its a competition piece for Telford and the category its in is OOB builds only. Have a great weekend my friend and speak soon
@smoothbrush4722
Жыл бұрын
Looks sick mate
@SteveJonesScaleModellingSite
Жыл бұрын
Hi Lucian. How are you my friend. It is a great kit and well worth all the hard work needed to put it together. Have a great weekend and speak soon
@BoysOfCinnamonCat
Жыл бұрын
A very cool AVF!
@SteveJonesScaleModellingSite
Жыл бұрын
Thats kind of you to say. I just started to build the model and I am hoping to post an update soon. Speak soon my friend
@BoysOfCinnamonCat
Жыл бұрын
@@SteveJonesScaleModellingSite you're welcome
@goforitpainting
Жыл бұрын
Cool.
@SteveJonesScaleModellingSite
Жыл бұрын
Many thanks for looking in
@OzzysScaleModelerSecret
Жыл бұрын
That's a cool looking kit Steve :) Thanks for sharing buddy . That's one for sure on the must have list. Are you planning to build it soon? Would love to know how that goes with ore without much trouble. Keep on the good work . Have a nice weekend and bench time my friend
@SteveJonesScaleModellingSite
Жыл бұрын
Hi Ozzy. It certainly is a great kit and well worth all the effort you need to put into it. I am about half way through the build and having a lot of fun. I am currently painting and weathering 62 separate items for the interior LOL. Will do the build videos hopefully next weekend. Take care my friend and speak soon
@OzzysScaleModelerSecret
Жыл бұрын
@@SteveJonesScaleModellingSite Thanks Steve for the info mate . Next order i will get one to :) Im looking forward already for the video , bring it on mate i would say :) Have a great weekend :) You too mate take care :)
@2ahdcat
Жыл бұрын
Kickass 👍
@SteveJonesScaleModellingSite
Жыл бұрын
Cheers my friend. It is a great kit and well worth all the hard work needed to put it together. Have a great weekend and speak soon
@gavinbooth
Жыл бұрын
Hope all's well with you Steve just checking in marra . Regards Gav.
@SteveJonesScaleModellingSite
Жыл бұрын
Hi Gav. Today is my first day back into YT and social media. Life has not allowed me to do any correspondence let alone any modelling. I lost my job - got a new one. Yeah! However lots of training and systems to learn. Ripped out the upstairs toilet and bathroom and made it into one big bathroom and walk in shower. Also a lovely holiday visiting Southwick House and seeing the D Day map room. However that is all behind me now. I am catching up on all my YT messages today and hopefully posting a video. Tomorrow I will be venturing back into the model room. Cant believe it has been three months. I have missed you and the community and looking forward to carrying on from where I left off. Many thanks for reaching out my friend and speak soon. Happy modelling!!
@gavinbooth
Жыл бұрын
At least your alive marra i thought the worst , i will have to get the whip round money for the wreath returned . We collected £4 .67 too . Still your with us and thats all that matters marra . Good to see you back Steve . Regards Gav.
@SteveJonesScaleModellingSite
Жыл бұрын
You crack me up mate😅😂🤣
@John_Sharrock
Жыл бұрын
Great review Steve,it looks like a nice kit. However,and you know me,those track links are a no-no for me! 👍
@SteveJonesScaleModellingSite
Жыл бұрын
Hi John. I totally agree. It should be Fruils all the way for this model along with a metal barrel. Many thanks for looking in and have a great weekend
@auttorama
Жыл бұрын
Hello Steve, thank you for subscribing to my channel. I just subscribed to yours. I loved your walkarounds, especially the T-54 one which will be very useful to me for my Trumpeter T-54A 1/35 build. Cheers!
@SteveJonesScaleModellingSite
Жыл бұрын
Many thanks for the sub my friend. Speak soon and happy modelling
@gavinbooth
Жыл бұрын
Sorry Steve this one went under the radar . I look forward to the build , do you favour open vehicles than turreted ones i suppose you get more of a chance to show your skills . Regards Gav.
@SteveJonesScaleModellingSite
Жыл бұрын
Hi Gav. Its more a matter of more for your buck. It works out that you are doing two builds for the price of one as you have to part build then paint and weather the interior. Then you finish the build and paint and weather the rest of the model. This cost of living crisis is a real bitch LOL. Take care my friend and thanks for looking in
@MadGeniusProductions_MGP
Жыл бұрын
Dang this does look like a nice kit for sure. I'll put it on the list to find.
@SteveJonesScaleModellingSite
Жыл бұрын
Hi Joe. How are you my friend. It is a great kit and well worth all the hard work needed to put it together. Have a great weekend and speak soon
Пікірлер: 64