Ow do! That looks mighty impressive fella. Hitting part 2 now A
@Pezzapoo
Жыл бұрын
Thx Andrew, I loved the build
@Granite-City-RC
Жыл бұрын
WOOT WOOT ! I've not been brave enough to cut my loader into 3 bits to do the suspension yet lol
@Pezzapoo
Жыл бұрын
The magom vid seems good but yeah its a pucker twitcher for sure haha
@herbieRCpaints53
Жыл бұрын
Superb mate can't wait to see how it turns out👍👍
@Pezzapoo
Жыл бұрын
Thx bud, very challenging it turns out lol
@SpringWoodsRC
Жыл бұрын
Awesome project buddy 😁👍 up's van looks pretty good, sure by time ur done it be fastest in the fleet 😂🤣🙋♂️
@Pezzapoo
Жыл бұрын
Haha yeah firing mechanism to shoot out parcels
@SpringWoodsRC
Жыл бұрын
🤣
@tomjohns8498
Жыл бұрын
Nice to see someone build something from their own imagination not a kit 👌👍
@Pezzapoo
Жыл бұрын
thanks Tom, when it works its one of the most fun parts of the hobby for me
@ianyams
Жыл бұрын
Nice little project 😊
@Pezzapoo
Жыл бұрын
thx mate, enjoying the challenge of not pulling my hair out )
@ianyams
Жыл бұрын
@@Pezzapoo 🤣
@rccrawlersmid-wales645
Жыл бұрын
I suggest a funky latch system as well.
@Pezzapoo
Жыл бұрын
thx Stevo.........now I have to think harder and my puny brain is already hurting )
@thatsmyrc
Жыл бұрын
Bruder trailers are good for converting. I’ve done quite a few. There are tons of cad files for them to convert the ramps and I’ve even seen the drop. If and when you decide on rear end engineering. The axles if you cut like you mentioned no heat is needed for removing wheels. You can remove the wheels that way but also you can “since the axle is cut” slip a 5/8” nut through the axle and it threads onto the plastic inner hub of wheel. From there just clamp cut axle into a small vise and use a claw hammer to pull wheel off. As simple as pulling a nail out of wood 😉
@thatsmyrc
Жыл бұрын
I’ve also used cheep aftermarket little wheels and tires off mini rcs that did the job extremely well. Take into the effect you can either make own axles using rod and thread ends if wanting to use a 12mm hex for wheel options.
@Pezzapoo
Жыл бұрын
@@thatsmyrc thx for the tips Ron, I have cut the axles off so that I can work on the frame and then I can decide how to approach the wheel issue. I decided to rivet all the box sections on and it worked great instead of bolts
@thatsmyrc
Жыл бұрын
@@Pezzapoo cool beans 👍🏼 well if you already cut the axles no really use saving the wheels. Due to I imagine your going to want rubber not reuse the plastics. Personally I can only remember one plastic wheels I reused. That was on the Bruder gator. I’m deep into a build I’m doing, I’m down to the final soldering and wiring for personal lighting. After that I’ll be back for another video.
@3dman875
Жыл бұрын
Cool video I really enjoy it m8
@Pezzapoo
Жыл бұрын
thx Freddo
@Granite-City-RC
Жыл бұрын
If you run out of space for more weight grind the wheels mate, can add some in there if you dont think you'll need the flex in the tyres ....... i might have a box of weights that i havent got round to using yet myself :)
@Pezzapoo
Жыл бұрын
Great idea and thx for the offer dude, I have some weights knocking about but tbf I have fixed the issue recently with an axle mod and so far so good, thx for stopping by man
@grrfy
Жыл бұрын
A little heat and a strong pull and the wheels on trailer come off ok ,just have small friction grooves .
@Pezzapoo
Жыл бұрын
awesome thx mate will give it a go
@SpringWoodsRC
Жыл бұрын
Could it be possible to use 2 servos an horns hucking on to a bar going through the bed where you want to lower and detach 🤔🤷♂️
@Pezzapoo
Жыл бұрын
Maybe for someone with skills lolol
@junkb06
Жыл бұрын
Loving the builds man. Is the ups van same scale as the construction van?
Пікірлер: 31