Thank you Jay! I could not find the model number and wasn't 100% on the part that I needed until I watched this video.
@Canada_Facts
3 жыл бұрын
Glad I could help!
@CraigClarkPersonal
5 ай бұрын
Very helpful, thank you!
@uxb2001
4 жыл бұрын
Used your instructions on my Maytag Gemini which is a sister brand of your Kitchenaid. watched your video Friday ordered part from Genuine Replacement Parts received part overnight, had replaced same day. total cost $101 US. Thank you for posting.
@Canada_Facts
4 жыл бұрын
Great to hear that
@aprilp.9181
2 жыл бұрын
I have this same model. I can't even tell you how many times over the years having this range, how I had to replace the same parts. So frustrating because it always seem to happen around the holidays. The last repair person that came out told me if it happens again to take the knob off and spray WD-40 in the hole. It worked a few times perfectly but now this last time it did not. Now i have to replace the part once again. Thank you for your video. Very helpful.
@Canada_Facts
2 жыл бұрын
Same here- So better is to take it out, clean and put back I figured out that the part is not very complex, you can dismantle and clean it
@JohnDoe-hd5vd
2 жыл бұрын
Thanks for that comment, took mine apart put some penetrating oil in there and left it for a while. Ended up clamping some vise grips to the knob stem and giving it a good twist in the correct direction. Just when I thought I was going to break it, it came loose. Working fine now. Mine was on the griddle so wondered if it was just the aluminum housing corroding a little on a burner that isn’t used as much.
@SnowLover1963
4 жыл бұрын
I have similar range and same problem at the right front one, watched your video many times, replaced new valve successful. Thanks!
@Canada_Facts
4 жыл бұрын
Really pleased to hear that
@SamDSchumacher13
11 ай бұрын
Does KitchenAid have a known design issue for these components? I have model KDRS505XSS01. And our front left burner just seized up for the third time in a year and a half.
@joevon8530
5 ай бұрын
Thanks
@cydeweyz
Жыл бұрын
Thank you. This helped out a lot
@Canada_Facts
Жыл бұрын
Glad it helped!
@tadhg-timdolan326
3 жыл бұрын
Great Video - Thank you This range, same model, was NOT a good buy. It's the heat from an oven door left open that causes the problem. The control valves are not adequately protected. More revenue from sale of spare parts. I would not encourage anyone to buy this range, sadly. I've had to insert a piece of aluminum foil along the front of the range and under the knobs, to deflect the heat away and protect the valves. Otherwise, this issue will continue to happen
@nataliecoffman-tyre5824
3 жыл бұрын
I have replaced valves three times already on model KDRS505XSS03. Very poorly made product. The first time I boiled water on the back right burner the clear coat finish came off the control panel on the top right corner. The finish in the oven is defective and little pieces/shards like sand of the blue coating drop into the oven when baking since I used the Self Clean feature. KitcenAid would not help until the upper broiler began coming on by itself (safety hazard). Then they came out and fixed the valves and the control panel. After watching this video I am confident that I can replace the valve myself as long as the screw heads don't break off while removing them like they did with the last two repairmen. Wish me luck!
@Canada_Facts
3 жыл бұрын
Thanks and wish you luck
@uxb2001
3 жыл бұрын
Happy Wife, Happy Life!
@shanescott8410
Ай бұрын
What language is this?
@salmarani2408
4 жыл бұрын
Hi I’m having the same problem with my cooking range
@Canada_Facts
2 жыл бұрын
I hope this would have helped
@iwirt6347
Жыл бұрын
@vinodchaudhari2803
2 жыл бұрын
I have the same issue on the exact model and burner. Tried spraying it with with white lithium but it didn’t work. I FIRST ordered part WPW10206288 as I was in the description of your video but when I heard you carefully, you said front rear which is part # WPW10206287 so I changed the order to this one. Can you please confirm if I ordered the correct part or not? Thanks.
@Canada_Facts
2 жыл бұрын
Hi, Correct I would suggest to check the online manual of your range and find the correct part code I think the left and right knobs in the extreme right and left have one part code and the ones in the middle are different
@vinodchaudhari2803
2 жыл бұрын
Thanks for the quick response!
@Sean-Aviation
11 ай бұрын
the valve can be disassembled, cleaned with wd40 and reassembled. don't waste money on a new unit. its simple
@gamelover420
Жыл бұрын
You didn’t do any gas leak tests in the video. Hopefully no one blows their home trying this.
@salmarani2408
4 жыл бұрын
It’s only two years old
@nataliecoffman-tyre5824
3 жыл бұрын
I had problems from the first day I had mine with the clear finish coming off when I boiled my first soup pot of water. The problems only got worse with time.
@salmarani2408
4 жыл бұрын
The company name is whirl pools I called the company a technician came and he said that this needs to be changed and the estimates he gave me is over $ 500 I don’t know what to do I’m so disappointed.
@Canada_Facts
4 жыл бұрын
Hi, As I have already told in the video that it costs $500. But what you can do is , just remove the knob and apply some wd40 with the small pipe into the shaft The primary reason is loss of grease After applying let it stay and then try turning with the knob If it’s still hard, order the part from partselect.com and replace yourself I have already installed 3 on mine, they wear out and you can’t keep spending $500
Пікірлер: 31