I just bought a set of KKE's & was searching for a video about how to install them and stumbled across your video. I'm glad you are happy with them so far! I'm looking forward to trying out mine soon. Good video. Thanks!
@VigaBraaap
3 жыл бұрын
Thanks man. I'm on my 3rd set of tires and they are holding up well.
@lucasnickolson3425
Жыл бұрын
long term review/ update ??
@mikefisher3827
3 жыл бұрын
Thank you for the review and follow up!
@VigaBraaap
3 жыл бұрын
Sure thing!
@steroidjunky9394
Жыл бұрын
Think I'll grab a set I've been on the fence but just wanted to try em
@YAMAHA_YZ450F
26 күн бұрын
Hello friend! I want to buy the same Chinese kke wheels with kke hubs for yamaha yz450f. 1. What can you say bad about these wheels? 2. Do the spokes often loosen? 3. If I inflate the tires in the front and rear wheels with a pressure of 2.2 atmospheres and jump from a springboard 3 meters high or higher and land on the ground, then the wheel RIMS WILL NOT BEND and the WHEEL HUBS WILL NOT CRACK from such high jumps? THIS WORRIES ME THE MOST, AS I HAVE SEEN MANY CHINESE MOTORCYCLES WITH CRUMPLED RIMS AND ALMOST NEVER SEEN THE JAPANESE ORIGINAL CRUMPLED RIMS. Thank you so much in advance !!!👍
@kleystervarginha2352
2 жыл бұрын
Muito top !!!! Parabéns pelo cuidado e carinho com essa 2t
@nelsonangotti7382
3 жыл бұрын
Very good vídeo 👋👋👋
@kleystervarginha2352
2 жыл бұрын
Imagina no BR o preço de uma customização dessa :/
@DualsportDisport
3 жыл бұрын
Thanks for the video. What do you know about the wheel bearings? I have heard they are different sizes from the standard wheels does anyone know about how to order replacement wheel bearings?
@VigaBraaap
3 жыл бұрын
For the wheels I got, RM250/125. The front bearing is model 6905 and the rear is 6005. The information is available in a pamphlet that comes with the wheel.
@DualsportDisport
3 жыл бұрын
@@VigaBraaap have you found replacements anywhere? My concern would be getting a replacement bearing when they fail.
@VigaBraaap
3 жыл бұрын
Yes, partszilla, skf, any parts place. Easy. Here is a link to skf www.skf.com/us/products/rolling-bearings/ball-bearings/deep-groove-ball-bearings/productid-6005
@DualsportDisport
3 жыл бұрын
@@VigaBraaap thanks!
@oddricky
2 жыл бұрын
Do your wheels spin freely ? Just bought these for my bike and I noticed your wheels don’t spin that freely just like mine. If so, what is a solution for that
@VigaBraaap
2 жыл бұрын
The wheels spin freely as it should. In the video, my stand is low and the tires are touching the floor a little. That's why.
@oddricky
2 жыл бұрын
Ohhh gotcha ! Thanks boss 👍
@oddricky
2 жыл бұрын
Ended up finding the culprit, it was my front brake rotor it was bent 😅
@VigaBraaap
2 жыл бұрын
That would do it. Glad you found the problem.
@WILLY52368
3 жыл бұрын
I bought a set of KKE Wheels awhile back which I find pretty good but the problem I'm having trying to replace my bearings, seals and spacers. I would like to avoid everything related to China to avoid the outrageous shipping cost. There's got to be someplace here in the states where I can get them replace, any information would be greatly appreciated?
@VigaBraaap
3 жыл бұрын
You can replace the bearings with anyone with the same diameter. Try contacting All Balls racing and give them the measurements, they may be able to help you out.
@WILLY52368
3 жыл бұрын
@@VigaBraaap You are the only one with a solid response, I truly thank you for that. One more question, can the spacers be replaced by someone other than KKE Wheels? The KKE wheels are design to fit XR650L OEM style hub as well as rim. I pretty sure I can get seals and bearings I just hope I don't have to the spacers from China.
@VigaBraaap
3 жыл бұрын
I rarely had to replace spacers and I never had to replace the inner spacer, but as long as you get or fabricate one with the same length you should be fine. The inner spacer presses against the inner race of the bearing. here is a video about it: kzitem.info/news/bejne/2maIq4lqp4CLjH4 I don't know what bike you got the wheels for, XR650?, but for the outer spacers I would get the length of each one and 1. see if OEM are the same or 2.get generic ones and cut to length. Good luck!
@WILLY52368
3 жыл бұрын
@@VigaBraaap If only I could send you a pic of my spacers so you could tell me if they need replacing. Btw, kkewheels finally got back to me with the information. Saves me the hassle of taking the wheel off, lol. Hey thanks again the information you provided will someday come in handy for sure. Thanks again, braaap....
@VigaBraaap
3 жыл бұрын
@@WILLY52368 anytime, if you haven't done so, please subscribe. Thanks.
@DavidWilson-ye2yj
2 жыл бұрын
Are these still holding up ok?
@VigaBraaap
2 жыл бұрын
Yes they are. I'm on my 6th ser of tires. Got a small flat spot on the front rim due to a rock on a trail but I think would get the same on any other wheel. Needed to adjust spokes more often in the first set of tires but after that was typical. No bearing issues either.
@YAMAHA_YZ450F
26 күн бұрын
@@VigaBraaapHello friend! I want to buy the same Chinese kke wheels with kke hubs for yamaha yz450f. 1. What can you say bad about these wheels? 2. Do the spokes often loosen? 3. If I inflate the tires in the front and rear wheels with a pressure of 2.2 atmospheres and jump from a springboard 3 meters high or higher and land on the ground, then the wheel RIMS WILL NOT BEND and the WHEEL HUBS WILL NOT CRACK from such high jumps? THIS WORRIES ME THE MOST, AS I HAVE SEEN MANY CHINESE MOTORCYCLES WITH CRUMPLED RIMS AND ALMOST NEVER SEEN THE JAPANESE ORIGINAL CRUMPLED RIMS. Thank you so much in advance !!!👍
Пікірлер: 34