I picked up one of these last week and have been using it at work , I have to say I really like it. I think it feels better in the hand than the standard 11 in 1 from Klein, that's purely subjective of course, but I find myself going straight to this tool for many jobs! Great video by the way!
@projectpinehills
Жыл бұрын
It does have a good feel to it. Thanks for commenting!
@LordStanley94
9 ай бұрын
@@projectpinehillsGot this today @ Lowes. Feels good in the hand. Good grip. Thanks for creating the video. Helpful. Beginner here. 😊
@Auto-Bots.Custom.Detailing
7 ай бұрын
I absolutely hate the grip and feel of the Klein drivers… I’ve got 5 years of extremely hard use..the Kleins were terrible.
@Thanos0001
Жыл бұрын
As a field technician, the fewer tools I have to carry, the better. I will be picking one of these up on my next trip to the store. Great video.
@projectpinehills
Жыл бұрын
Thanks for watching!
@uther10
Жыл бұрын
Klein def made some great decisions with this model.
@projectpinehills
Жыл бұрын
I agree, you can use it as you please.
@mikeismad2313
6 ай бұрын
I'm a homeowner that have been seeing this used in other creators videos for HVAC repair and have been waiting a reason to buy this. I was troubleshooting my AC today and needed a new fuse, so picked this up at the same time. I really like it. My previous goto tool was a Dewalt multibit driver, which I have really liked and never even thought about the the 1/4 nit driver was the standard size for the bits. I appreciate your video.
@projectpinehills
6 ай бұрын
Hope the video helped. Thanks for the feedback and thanks for watching! 👍
@Peponlikespeson3684
Жыл бұрын
I was hesitant on this one after watching this review I’m definitely picking it up. The versatility and universal options is a must imo. The fewer tools I have to carry in my pocket the better. 🤙🏽
@projectpinehills
Жыл бұрын
Thanks for watching!
@boone6751
Жыл бұрын
I’m an industrial electrician, bought one of these in November. It is a great improvement over the old 11-1. Just need to find impact rated flip bits for replacement. As mentioned magnetic nut drivers would be excellent but I can’t see how they would be able to incorporate that feature. Worth the extra money for sure
@projectpinehills
Жыл бұрын
Thanks for sharing!
@jman42s
Жыл бұрын
I was a big fan of the 7 in 1 flip impact socket model they had. And hoped they’d make this eventually. Makes going back to the truck for my bit case much less common as I always have my 11 in1 on me
@projectpinehills
Жыл бұрын
I was a fan of the 7 in 1 flip until I knocked the socket off a few times while on a ladder when only having one bit loaded. Thx for commenting!
@nathanh5978
Жыл бұрын
Just picked this up today. I really like the original 11-1, but this one seems a little more versatile. I really like it so far. Nice review.
@projectpinehills
Жыл бұрын
Tough to beat the original, time will tell. Thanks for watching!
@scottlaroc7396
9 ай бұрын
Thanks for the tutorial. Sister in law brought one and I said let me see if there is something showing how to use this thing, lol 😆. Now I’m off to the fixing.
@projectpinehills
9 ай бұрын
I’m glad the video helped! Thanks for posting! 👍
@bryonjasso3304
Жыл бұрын
You can’t go wrong with Klein. They are definitely the best tools out there. It doesn’t matter what trade you are in.
@projectpinehills
Жыл бұрын
Thanks for sharing!
@everythingbobbywolfe
Жыл бұрын
As an industrial electrician, i have tons of stuff i carry with me. There are only a few things i actually carry in my pockets - knife, ticker, sharpie and this new multi tool. The old 11-1 is in the bag. Magnitize the sockets, Klein! Thanks
@projectpinehills
Жыл бұрын
Thanks for the feedback and thanks for watching!
@asmautollc
Жыл бұрын
Great overview. I had to get one after seeing another good review of it. Super cool and the sky’s the limit for different configs.
@projectpinehills
Жыл бұрын
Thanks for watching!
@MORGANSMaintenance
Жыл бұрын
Nice review… The customization is definitely my favorite part… turn it into all sorts of things…👍
@projectpinehills
Жыл бұрын
Hey thx! I like your overview on it too! I was planning to show more customizations like 3 1/2” Milwaukee bits for recessed screws but ran out of time. You have the perfect ugly xmas sweater BTW. lol
@MORGANSMaintenance
Жыл бұрын
@@projectpinehills 👍
@mynamesjeff347
Жыл бұрын
Man they did it , my 11-1 annoys the shit out of me sometimes. Being able to pop this out throw in my impact is gonna be extremely useful in hvac installs
@projectpinehills
Жыл бұрын
Good deal. Thanks for watching!
@dabby710
Жыл бұрын
I already do this with my hvac chuck and my regular 11-1. With the regular 11-1 you get more extension than the new impact 11-1
@projectpinehills
Жыл бұрын
Thanks for sharing!
@mynamesjeff347
Жыл бұрын
@@projectpinehills I got it and it’s very sweet , pairs perfectly with my m12 impact
@projectpinehills
Жыл бұрын
@@mynamesjeff347 good deal 👍
@douglassmith233
Ай бұрын
I too was skeptical at first. Turns out it is a very versatile tool. I've been using my 11-in-1 with product 32933 extension.
@projectpinehills
Ай бұрын
That’s good to hear. I really like the ratcheting version. Thanks for watching!
@A3777-i5m
Жыл бұрын
I was sold as soon as I heard impact rated ❤
@projectpinehills
Жыл бұрын
Thanks for commenting!
@larasfishingchronicles9301
8 ай бұрын
I was actually going to Home Depot to repace my Malco bit and I found this Klein screw driver sold 😊
@projectpinehills
8 ай бұрын
Klein has a ratcheting version now. Thanks for watching! 👍
@The_Durrs
Жыл бұрын
That with the Klein impact 7 in 1 is the best customization I can think of right now. Then you have every nut driver size in flip sockets that you can swap out.
@projectpinehills
Жыл бұрын
That would give you a lot in one tool. Thanks for watching!
@preekie1
6 ай бұрын
What was missing in your video was the ability to put 1/4" drive sockets on it. Sure, I always want to use my cordless drill, but in a pinch, confined spaces or simply convenience the ability to also attached sockets to it is another great feature making the tool even more versatile.
@projectpinehills
6 ай бұрын
If you are interested in sockets, check this video out: kzitem.info/news/bejne/uXifvZqniGuGYG0si=jAt8PUWmR92CYjFo Thanks for watching! 👍
@jessealvarez6687
2 ай бұрын
Being an impact rated screwdriver i would have loved if they had an impact spot in the back where you can use your hammer on it . Sometimes screws get some dirt built up or rust and that would help lossen it. I mean its no big deal but they already did so much to the screwdriver.
@projectpinehills
2 ай бұрын
That’s a good point. Thanks for watching!
@kevinklepp5894
Жыл бұрын
Very nice I've been in the electrical work for 25 years always like the regular 11 in 1 this one looks like a good way to go now that everything is being done by impacts these days I'll go get one thanks for that great review
@projectpinehills
Жыл бұрын
Thanks for watching & commenting!
@egbluesuede1220
7 ай бұрын
New sub for me. I was just looking at these at HD and now I understand it a lot better. Seems very versatile.
@projectpinehills
7 ай бұрын
Thanks for the feedback and thanks for watching. They have a ratcheting version now. 👍
@JonathanGarcia-cy7hd
Жыл бұрын
100% buying as soon as it’s stock at my local HD
@projectpinehills
Жыл бұрын
Hope the video helped!
@trlarosa
Жыл бұрын
Great review. For the impact part I would rather just leave my driver set up with an impact bit installed and use this just as a screwdriver. It just adds work to take apart the screwdriver to set up the impact and go back and forth between the two.
@projectpinehills
Жыл бұрын
Good point, hard to beat a malco driver, nice to have the option in a pinch though. Thanks for sharing!
@johnfaustus1
Жыл бұрын
Canadian here - it's nice they included the 2 most useful Robertson's drives (which are super common), but wish they made a metric version. The 3 SAE nut drives are not common up here in anything but American-influenced industry like construction.
@projectpinehills
Жыл бұрын
Yes, maybe if this tool is successful, Klein will introduce a metric version. Thanks for sharing!
@carsonrowe8948
Жыл бұрын
Yeah but we use it for construction bro. Never use metric.
@projectpinehills
Жыл бұрын
Thanks for watching!
@christianbenfell2715
Жыл бұрын
The standard 11/1 has some shortcoming. Not accepting a standard 1/4 drive bit seemed so counterproductive to me. Also, my flip bit (PH2/SQ) eventually wore out and would sometimes fall apart in my tool bag. This magnetic version looks much better and more practical. Other multi tip screwdrivers were ahead Klein, and for cheaper. I’m glad they fixed this
@projectpinehills
Жыл бұрын
Thanks for watching!
@ryot340
Жыл бұрын
Thanks for the Vid. I do solar panel installation & swear by the first 11-n-1 & didn't see this one. Definitely going to get cause the only power tool I have on a roof IS my impact. Cheers-
@projectpinehills
Жыл бұрын
Thanks for watching!
@michaelgilbert8794
Ай бұрын
Good description. Much appreciated
@projectpinehills
24 күн бұрын
Glad it was helpful!
@mbk337
Жыл бұрын
This thing is slick! Thanks for the overview!
@projectpinehills
Жыл бұрын
No problem! 👍 Thanks for watching!
@experienceprecision5406
Жыл бұрын
Ever since the m12 impact, I don't think I have used my actual "nut driver" in 10 years lol. But still will get one 👍
@projectpinehills
Жыл бұрын
Lol, Thanks for watching!
@oriansinkleryukon2680
Жыл бұрын
Nut drives need to be magnetic. We need that!
@projectpinehills
Жыл бұрын
That would be an improvement. Thanks for watching!
@FossilOcelot
Жыл бұрын
As someone who does demo I specifically buy non magnetic nut drivers so I don’t have to flick every fastener out of the drive
@oriansinkleryukon2680
Жыл бұрын
A little gum will take it out
@salm8990
Жыл бұрын
Amen brother
@projectpinehills
Жыл бұрын
Amen
@solargoat
Жыл бұрын
Cool video grabbed one last week and getting it figured out.
@robertoperezjr.1119
Жыл бұрын
Nice! I really, really loathed the 11-1! The bits always fell out so easily. The Klein 10-1 was great in that it didn't let the bits fall out. But they don't make that anymore. I just figured Klein started have the 11-1 made in another country. I ended up going to picquic mult-driver. But I think I will check out this new Klein one. Thanks.
@projectpinehills
Жыл бұрын
USA made Klein is definitely better, I’d pay more for the 11 in 1 if it were made in the states. Thanks for watching!
@Auto-Bots.Custom.Detailing
7 ай бұрын
I installed appliances for Lowe’s for 5 years.. and these multi tools were are biggest go to tool for tearing down appliances… honestly I hated the Klein.. with a passion..? Thought they were cheaply made..always lost the bits. These new drivers are interesting to me though. I was at Lowe’s the other day and they had 4 different models.. with a $15 difference in price, we never had these.. I want to pick one up to try. I know electricians love Klein.. but I always avoided them when grabbing tools for the job. Looks like they came up with some new gimmicks, but I want to purchase the flip bit to see if it’s any good.
@projectpinehills
7 ай бұрын
If you hated the Klein, what was the go to multi tool that you used??
@allkindsofoutdooractivities
Жыл бұрын
Very nice! I have it in my Home Depot cart now!
@projectpinehills
Жыл бұрын
Thanks for sharing!
@hildolfrdraugadrottin7279
Жыл бұрын
I have a lot of their tools, they make good stuff. Looks like I'll be getting another screwdriver I don't need. 😆
@projectpinehills
Жыл бұрын
Thanks for watching!
@usman6
8 ай бұрын
thanks very helpful to see how to pull out all the bits
@projectpinehills
8 ай бұрын
Thank you and thanks for watching! 👍
@Sean-bp6xb
Жыл бұрын
Thx for sharing good info. Watching from Ontario Canada 🎉
@projectpinehills
Жыл бұрын
Thanks for watching!
@drewcandel
Жыл бұрын
Great video will be picking one up asap.
@projectpinehills
Жыл бұрын
Hope you like it, thanks for watching!
@MrTwoTwelve
Жыл бұрын
Picking up one of these asap!
@projectpinehills
Жыл бұрын
Hope it’s in stock, thanks for sharing!
@HandyRandyReviews
Жыл бұрын
yup, I think i’m picking one of these up now
@projectpinehills
Жыл бұрын
Thanks for watching!
@iedufake
Жыл бұрын
Magnetic !! It would be perfect!
@projectpinehills
Жыл бұрын
The would be an improvement! Thanks for watching
@TheAgore47
Жыл бұрын
Now if they would sell the handle and the double ended 1/4 collets separately and marked down, that'd be nice.
@projectpinehills
Жыл бұрын
Ha, I had the same thought! Thx for watching.
@davewood406
Жыл бұрын
I may have gotten a bad one but the last 11 in 1 I got I bell mouthed the main shaft and I couldn't insert that end into the handle. This one looks good and sturdy.
@projectpinehills
Жыл бұрын
Thanks for sharing!
@hacksaw5800
Жыл бұрын
They have life time warentee
@projectpinehills
Жыл бұрын
Good point!
@1Fine69c
Жыл бұрын
Funny thing is I was on a job where I had to get a ton of these 3 inch 5/16 screws out there exhaust fans and i didnt have a nut driver for my drill. so i threw my 11 in 1 in my drill chuck. It worked but it destroyed my driver after doing 30+ of these fans. Having this would have been perfect
@projectpinehills
Жыл бұрын
Thanks for sharing!
@jharding32
2 ай бұрын
Nice job
@projectpinehills
2 ай бұрын
Thanks for watching!
@austinreeves5221
Жыл бұрын
I got one 2 weeks ago. Hand feel is better and love the impact part but bits fall out easily just like the newer 11 in 1s. Older ones were better. Love the tool tho
@projectpinehills
Жыл бұрын
Thanks for your feedback.
@godlyxferris7879
10 ай бұрын
Amazing screw driver 🤘🏽
@projectpinehills
10 ай бұрын
Thanks for watching! 👍
@abubbam
Жыл бұрын
I’ve used the regular 11 in 1 in an impact for years and never had an issue
@projectpinehills
Жыл бұрын
How did you do that with double ended bits? Thanks for watching!
@danpoczynek
Жыл бұрын
I have been an Electrician for over 40 and although Kiein tools are just about the best all- around you can get. However, any time you get a tool that dose more than one thing it tends to be crap for everything. I personally cannot stand 11in ones or wire stripers that have plyers, crimpers and stripers it`s all crap. I tell all my apprentices to toss it in the trash.
@projectpinehills
Жыл бұрын
I think it depends on what your trying to achieve. Small maintenance job, where compact convenience shines vs. a big job where you have a lot of repetitive work and prefer a standard tool. Thanks for commenting!
@thenextgen1able
Жыл бұрын
The 14-in-1 Multi with the shank from the 7-in-1 flip sockets is a more versatile combo than this, while only weighing slightly more. Throw in the 27-in-1 precision security driver and you've got 2 drivers that can tackle almost anything LV or HVAC.
@projectpinehills
Жыл бұрын
Thank You for sharing!
@rb1891
6 ай бұрын
Best screwdriver 💯
@projectpinehills
6 ай бұрын
It is handy, I really like the ratcheting version. Thanks for watching! 👍
@aitf99
Жыл бұрын
Defnite improvement imo
@projectpinehills
Жыл бұрын
Thanks for watching!
@solargoat
Жыл бұрын
Just came across your page. Love the video s
@projectpinehills
Жыл бұрын
Thanks for watching!
@MrMultitool
Жыл бұрын
I just picked one up yesterday.
@projectpinehills
Жыл бұрын
What do you think of it? Thx for watching!
@MrMultitool
Жыл бұрын
I agree that it's an improvement of the original. You did a great job
@projectpinehills
Жыл бұрын
Thx!
@maruzura3658
Жыл бұрын
Does the new one retain the feature where all the bits constantly fall out of it and get lost on the floor?
@projectpinehills
Жыл бұрын
Thanks for watching!
@vaska916
Жыл бұрын
I had this in my hand before checking out but was on the fence and decided to leave it. Next time I'll grab one though. Seems like a good addition to the tool belt. Keep up the videos
@projectpinehills
Жыл бұрын
Thanks for sharing!
@bjjthaiboxing
Жыл бұрын
I'm surprised you didn't call the Torx a star bit? You did mention Robinson when talking about square bit? Anyway, I'm sold... I will be adding that to my collection of Klein Screwdrivers. I wish I'd seen this video sooner? I was at Home Depot almost 2 weeks ago? That's over 2 hr drive from my house? (I'm sure someone will try and be helpful by informing me about shopping online? No need, I'm aware.)
@projectpinehills
Жыл бұрын
Thanks for sharing!
@gordonborsboom7460
Жыл бұрын
RO-BERT-SON. not a ro-bin-son. Do you ever come across square drive screws ?
@bjjthaiboxing
Жыл бұрын
@@gordonborsboom7460 I use them all the time. Thanks for the correction. That's what I get for not wearing my reading glasses. I can't trust my phone to predict what I'm trying to say? Lol
@projectpinehills
Жыл бұрын
Yes I know, Robertson, I misspoke during the vid.
@mikecarr1484
Жыл бұрын
My problem is if I leave one around for any amount of time someone helps themselves to my Klein screwdrivers. I have lost three in two years . Last time someone stole my entire tool bag. (I work downtown in Reno) . So ya. Long as I can keep track of them they work the best.
@projectpinehills
Жыл бұрын
Dang. Thanks for commenting!
@wooki_in-the-wild
7 ай бұрын
Thanks for all that info in this vid.i just got mine today and as i was looking at it I noticed the barrels below the knurling has threads cut into them . Any idea what that is for ??
@projectpinehills
7 ай бұрын
What part of the tool are you looking at?
@wooki_in-the-wild
7 ай бұрын
@@projectpinehills the patent pending mid shaft. Just below the words pat pend is a 3 step thread .
@projectpinehills
7 ай бұрын
It’s a 1/2” nut driver.
@wooki_in-the-wild
7 ай бұрын
@@projectpinehills isn't the1/2 the handle itself? What im seeing is when you remove the shaftfrom the handle and itson the shaft.
@toby5961
Жыл бұрын
They left the bit shank hexagonal so you can use it with a wrench. Or take the bit out and you have an hex or (allen). Not sure what size that' ll be but it should work in theory.
@projectpinehills
Жыл бұрын
Thanks for watching!
@Bendc1970A1
10 ай бұрын
Would be better if "impact" rated meant you could tap the back with a hammer and it would slightly turn the bits towards the left (loosening) direction.
@projectpinehills
10 ай бұрын
I know what you mean! Thanks for watching! 👍
@chrisreibold1634
Жыл бұрын
The fact that this is slightly longer than the standard 11 in 1 means it shouldn't slide down and get stuck at the bottom of a Carhartt pouch. One small plus....
@projectpinehills
Жыл бұрын
Yes. Thanks for watching!
@jayybarra6236
Жыл бұрын
Excellent!
@projectpinehills
Жыл бұрын
Thanks for watching!
@jayybarra6236
Жыл бұрын
@@projectpinehills I went and bought 2 of these today from Home Depot. Thanks again for the most excellent review!
@projectpinehills
Жыл бұрын
Thanks, much appreciated!
@omar415sf
Жыл бұрын
Game changer
@projectpinehills
Жыл бұрын
Thanks for watching!
@L.Scott_Music
Жыл бұрын
Now if they could figure out how to make it ratcheting, that would be the ultimate!
@projectpinehills
Жыл бұрын
Thanks for watching!
@TheCordova1014
11 ай бұрын
Klien tool has that too the maco bit
@projectpinehills
11 ай бұрын
Yeah I have those on the channel too! Thanks for watching! 👍
@realSamAndrew
Жыл бұрын
What is the hidden feature? And, is the 1/2 inch nut driver really meant to be the handle? Kind of hard to get torque that way.
@projectpinehills
Жыл бұрын
The hidden feature is the standard 1/4” drive that allows you to run different items. Yeah, handle us 1/2” nut runner. Thanks for watching!
@urjnlegend
Жыл бұрын
Get the new 11 and 1 and the malco bit. You should have both, if you can't afford both, you're literally eating more money and time
@projectpinehills
Жыл бұрын
Good point, thanks for watching!
@koryhargett7145
3 ай бұрын
Does anyone know where you can get replacement bits (in black) lost the #1 #2 square bit
@projectpinehills
3 ай бұрын
Good question. They sell the bits for the original 11-in-1 on Amazon.
@ShikikanZer0
Жыл бұрын
Does this mean I can actually hammer on it with my pliers now? hahahaha
@projectpinehills
Жыл бұрын
Yes. Thanks for watching!
@DaveUssell
11 ай бұрын
Nice tool. Next step . . . ratchet in the handle.
@projectpinehills
11 ай бұрын
It’s would be interesting to see how that would work. Thanks for watching!
@SwiftHelix
Жыл бұрын
does the square drive reach the screws on a twin breaker? Sometimes the valley is tight that I always have to use a dedicated driver. My current multi doesn't fit well.
@projectpinehills
Жыл бұрын
I don’t know, anyone else have an idea?
@Synic08
Жыл бұрын
I think i’ll prefer the old one…. As far as daily work, i never felt it wasnt strong enough….. i think i’d cringe busting up my stuff in the impact anyway.
@projectpinehills
Жыл бұрын
Hard to beat the standard 11-1. I like that I can drive any 1” hex bit with this new one. Thanks for watching!
@smashyrashy
Жыл бұрын
Definitely a better channel than LastbestTool
@projectpinehills
Жыл бұрын
What a compliment? Thanks for watching!
@joel6689
Жыл бұрын
Ill be getting one
@projectpinehills
Жыл бұрын
Hopefully they are in stock. Thx for watching!
@PersonaN007Grata
Жыл бұрын
Not a fan of the 5/16 nut driver. It’s recessed a little bit more than I’d like and starts to slip on some screws. I have a set of Wiha nut driver bits and they’ll grab what this Klein cannot.
@projectpinehills
Жыл бұрын
Thanks for watching!
@fieldlab4
7 ай бұрын
But does it also accept the Klein Knect pass through sockets?
@projectpinehills
7 ай бұрын
No, that’s the newer ratcheting version that I have a video about here: kzitem.info/news/bejne/uXifvZqniGuGYG0si=xtG-xrNIEwsiYwPw
@josephlore4831
Жыл бұрын
What happened to the T10 & T15 on the new screwdriver that the original screwdriver has?
@projectpinehills
Жыл бұрын
The standard 1” bit holder took the place of one of them. Thanks for watching!
@joeb134
Жыл бұрын
Do they have one of those nut drivers with 1/5, 5/16, and 3/8?
@projectpinehills
Жыл бұрын
It has 1/4, 5/16, and 3/8 inch. Thanks for watching!
@jwilkers1
Жыл бұрын
They've got several tools I would buy if they made them in metric
@projectpinehills
Жыл бұрын
Agreed, thanks for watching!
@silvajay6443
Жыл бұрын
Does the grip slip like On some of the other ones with the new design
@projectpinehills
Жыл бұрын
Not so far. Thanks for commenting!
@rodgreene2687
Жыл бұрын
Bought one. Thew it out the next day.
@projectpinehills
Жыл бұрын
Did you like the original?
@wboss7
6 ай бұрын
Hi. Would I be able to use 5/16 36mm length hex bits in this?
@projectpinehills
6 ай бұрын
I don’t think so. Thanks for watching.
@djkillachris
Жыл бұрын
Worst thing about the original is rust. Second, driver shank is too short for many applications.
@projectpinehills
Жыл бұрын
Yeah there are always trade-offs, convenience (bit count) vs function. Thanks for watching!
@ADIYHD
Жыл бұрын
The biggest problem with all of the “?? in 1” tools is the Phillips bits! The second the Phillips bit wears , which never last long, the tool becomes almost useless. The Phillips is by far the most needed bit. If it can’t be replaced by itself, this tool has no use to me.
@projectpinehills
Жыл бұрын
Good point. Need availability of replacement bits. Thanks for watching!
@thenextgen1able
Жыл бұрын
Those are called 1/2" nut drivers. 1/2" hex is an allen key.
@projectpinehills
Жыл бұрын
Yes! Thanks for watching!
@nooranijan7777
Жыл бұрын
could you plz tell me the distributors or wholesalers of it without amazon
@projectpinehills
Жыл бұрын
Home Depot is the only place I know that has it.
@truthdefenders-
Жыл бұрын
So what was the "hidden feature!"?
@projectpinehills
Жыл бұрын
That you can customize the center collet.
@EK9Redline
Жыл бұрын
Damnit now i gotta buy it lol
@projectpinehills
Жыл бұрын
Ha, Thanks for watching!
@1mikewalsh
Жыл бұрын
I'm going to keep on using my ratcheting 11 and 1, provided no stinking maintenance man gets his hands on it and uses it for a chisel, AGAIN!
@projectpinehills
Жыл бұрын
ha! Thanks for watching!
@sal.m2A
Жыл бұрын
the handle is a 1/2 nut driver, not labeled
@projectpinehills
Жыл бұрын
Thats right. Thanks for watching!
@gnewman18
27 күн бұрын
But what is the threading for
@projectpinehills
24 күн бұрын
What threading are you referring to?
@gnewman18
21 күн бұрын
@@projectpinehills the thread between the two halves.
@dwaynelonganecker6529
Жыл бұрын
I missed the 1/2 driver? where is it!
@projectpinehills
Жыл бұрын
I did too… in the video lol. It’s the hex that is part of the handle. Thanks for watching!
@jeremiahnewsom7775
Жыл бұрын
The bits stay in the impact!!!
@projectpinehills
Жыл бұрын
Thanks for watching!
@oilandfireguy1739
Жыл бұрын
atleast when it comes to combo tools , klien is trash. I have between 5 to 10 different hand tools or flip socket sets and they all jam. Constantly having to use 2 pairs of channel locks to get bits free again. To the point I just carry 5 tools I can grab quickly, as opposed to their one tool that takes me minutes to switch bits.
@projectpinehills
Жыл бұрын
Thanks for your feedback!
@kleintools_EU
Жыл бұрын
🔥
@projectpinehills
Жыл бұрын
Thanks for watching!
@richardcarver5356
Жыл бұрын
What's the threading for on the center piece?
@projectpinehills
Жыл бұрын
It’s a 1/2” hex. Thanks for watching!
@wadeg6081
Жыл бұрын
What model Milwaukee impact was that…?
@projectpinehills
Жыл бұрын
M12 Surge, thanks for watching!
@stantom100
Жыл бұрын
NO WAY is the original 11 in 1 only $5 for a few dollars more , I would just get the IMPACT one However, I know the original rubber grip becomes loose after a short while ...( not sure what the impact one would be like ) From personal experience, putting too much on a single screwdriver, the bits are too SHORT to fit a lot of standard recessed holes ! !
Пікірлер: 256