this does not hurt Lion Steel. this is 18 dollars, the Lion Steel is 200+. it's not even the same market. if I want a 18 dollar knife won't buy a Lion Steel, same backwards. If I want a 200+ dollar knife I won't buy a 18 dollar knife. sry for bad english
@jllucas39
8 жыл бұрын
there's nothing wrong with reviewing cheap knives it helps us poor people
@cutlerylover
8 жыл бұрын
oh I love reviewing cheapos its just an issue with reviewing copies I dont have a problem with but some do...I see it as eductaion just because a histiry teacher talks about Hitler doesnt mean he liked his ideas you know, lol
@victoriaevelyn3953
8 жыл бұрын
look at it this way its less than 50 to 100 dollars/pounds which their for can be used as a dirty do any job knife take it into some place and use it and know that its not to expensive to damage just get a new one when it does die try out different makes have 5 knifes for the price of one
@wcreview8227
2 жыл бұрын
LOL!! Also there are MANY very good knives that are not that expensive, but I hear you !!
@raymondabella4684
Жыл бұрын
In my case, the companies Ganzo copied should tha k Ganzo for me eventually forking money on the real thing that I otherwise would not have done. In my case, I was one of those people that thought spydercos were ridiculous looking knives. I bought a Ganzo copy and the design grew on me so much that I went out and bought PM 2. Without Ganzo I wouldn't have bought the Spyderco. Besides, the person who pays $20 on Ganzo is highly unlikely to spend $245 on a Lion Steel knife so I highly doubt there is money being lost on higher end models like these. The main threat of Ganzo stealing sales from other knife companies are certain popular budget models like the Ontario Rat 1. I love the Rat 1 but I must admit the Ganzo's knockoff offers a more tempting deal. I bought that Ganzo for the heck of it but was pleasantly surprised. The 727 is lighter, Benchmade cross bar style lock, offers real G10 scales, a bit more compact in the pocket and offers D2 steal for about $10 Less than the AUS-8 version of the Rat 1 and $20 less than the D2 version of the Rat 1. I still bought my 5th Rat 1 but I hate to admit that I dig the 727 a bit better and I carry this thing more than the other 5 Rats.
@beefyb93
8 жыл бұрын
Stop calling these reviews. These are rants against Ganzo. From second one you can hear the BIAS in your voice. You don't have to like them but don't say that these vids are reviews.
@brucedavidson5400
5 жыл бұрын
beefyb93 - exactly right. From the start he had his ass on his shoulder. If you don’t buy something for 200$ you don’t have a real knife. This knife would serve 99% of guys perfectly for years on end.
@jordandurham8951
8 жыл бұрын
As an EDC I would much rather use a copy such as the ganzo as opposed to the pricey alternative.
@gunznguitarz79
8 жыл бұрын
Why? Personally I'd rather have a proven blade in case I need it for defense or a hard use task that may save my life.
@metalkingconqueror
8 жыл бұрын
I would trust a Ganzo with my life. They are incredibly well built as long as you do a cursory examination to see if it's a lemon (something a large company would do better at the factory).
@jordandurham8951
8 жыл бұрын
Jordan Smith I would rather risk loosing a cheap knife over an expensive one. However i would carry an expensive blade whilst on my property or when there is little chance of it being lost.
@jordandurham8951
8 жыл бұрын
Jordan Smith If i had unlimited funds, then i would use costly blades as a standard.
@dwightehowell6062
8 жыл бұрын
If you think you need a fighting blade that isn't it and you need some training or you're dead meat. A stout stick trumps a knife any day. As for the hard use that may save your life...that just sounds naive.
@pughconsulting
8 жыл бұрын
The 3 Ganzos I have are great. I carry one everyday. To each their own.
@Canto00
7 жыл бұрын
Making knives available to people who can't afford 3 digit knives or want to get into knives how dare they :l
@Liv1ngTheDream
8 жыл бұрын
For me, these Chinese copies are more a part of a learning curve in an expensive addiction. This knife in particular has helped me solidify an irrational need for a quality overbuilt blade more than anything else.
@RoyFernbach
8 жыл бұрын
I dont see a problem with buying copies. If I dont want to spend $200 on a knife (which I wont, ever) then having a copy, however inferior, is ok. I know it is an inexpensive copy, and as long as it is not a counterfeit then it is ok. People who want to spend $200+ on knives can brag all they want on how their knife is better, etc... but I dont mind it. I have more than a few Ganzos and I have yet to be disappointed. (I also have a bunch of actual Spydercos, Cold Steels, etc)
@michaelkoncal7622
6 жыл бұрын
Brand name snob. Even the big name knifes are now made in Taiwan dude. Some more than we know.
@BornIn1500
7 жыл бұрын
LMAO. How does purchasing the $20 knife take away from LionSteel? The people spending the $20 on this were not planning on spending $200+ on LionSteel. Guaranteed. Just look at all the spinners you started collecting. They're all copies of one original spinner that caught on! Yet you keep buying all the copies and thinking nothing of it....
@mikescooling
6 жыл бұрын
I have financial goals, I can't spend more than $20 for a knife that I'm going to use and possibly loose. Thumbs up
@markd752
7 жыл бұрын
Had a real SR1, sold it, WAY too slippery and the lock would get stuck too far in, what a piece of junk. Axis lock and very grippy g10 on this ganzo, I'm getting one for sure!
@vze24yd9
8 жыл бұрын
Maybe you should consider not spending 5 minutes on morals and just review the blade. Ad a disclaimer text box or something... No need to apologize for half the video.
@macro820
8 жыл бұрын
I'm sorry but I don't think a $20 knife takes away from the $200 one. Imagine a person who can't afford the lionsteel and never would have bought it because of it's price. That person now buys a Ganzo. Did they really take from lionsteel? Or do they just get to appreciate something they would have never got to see or hold other wise? I'm sure I'd be pissed if someone was copying my design but I don't really think they are stealing from LS.
@macro820
8 жыл бұрын
Or they want the $20 one to beat up not sharpen and stab into random trees lol
@mark16443
8 жыл бұрын
agreed, plus if you look at the lion steel and compare it to this they really are two entirely different knives besides the overall shape. the lock the handle construction and materials its all different. really if anything its helping publicize lion steels design and acting as a stepping stone for people who are just starting to collect knives. start cheap and work your way up. if the chunky ganzo is good then imagine how the lion steel would perform. and if people dont care about collecting they wont buy the lion steel anyways because why would you carry a 200$ every day and beat on it. ik id rather beat on a 20$ knife all day at work and leave the expensive knife at home
@cutlerylover
8 жыл бұрын
I see your point but its the copying of the design thats the issue not the fact they make a decent affordable knife...its stealing the design thats not cool, if there was a new phone company called pear and they made apple product copies it wouldn't fly with the public at all, lol...in the knife industry you have dedicated people who had strong morals on this issue then you have casual knife users who dont care about it, and those people dont spend thousands of dollars annually on knives...
@2adave
3 жыл бұрын
@@cutlerylover I wish pear came out with an iPhone for 200 brand new.
@wrjames38
6 жыл бұрын
This knife definitely is 440C and for the money is an awesome blade.
@taolandin
8 жыл бұрын
Goes to show you how much these American manufacturers markup their knives....some higher quality materials, workmanship and most importantly a "Made in USA" label on the box and BAM charge it 10 times the cost to make.
@Player_Review
8 жыл бұрын
This knife is actually a clone of an Italian knife.
@Player_Review
8 жыл бұрын
zero 4U There isn't a 'USA badge' on Lionsteel products. They are made in Italy.
@Player_Review
8 жыл бұрын
zero 4U Gotcha. Westernized countries do indeed demand more pay for their factory workers. Definitely shows in the pricepoints. I'm sure they could bring it down some though, so good points you two are making.
@robertkirk4387
8 жыл бұрын
Copying is what the "Japanese" motorcycle, electronics and motor car industry did in the 50's and 60's now look at them, we all start somewhere
@craps4851
7 жыл бұрын
get this knife it's a good one for the price. it's hard to screw up this particular design. it's got decent steel. I reprofiled the edge and now it's my most used knife
@Lilnasty-jo3dc
8 жыл бұрын
If a person is willing to throw $200 on a knife, that person will not drop in price to get a Ganzo! That's a fact! Ganzo is not taking anything away from these overpriced knives! The person that buys budget knives will not ever buy a $200 knife to use! If these companies are doing this legally then I have no problem with it! We the consumer are the ones who benefit from this, when in most cases we are the ones getting screwed! It's just a tool, there is only so many ways and designs for a knife to be made and for it to look! If your tired of everything made in China, then get out and vote for people who want to bring jobs and manufacturing back to the US and stop voting for people who support our jobs going to China and other countries!!!
@raysirx9
8 жыл бұрын
You are all over the place with your review. You say "I am not biased" but through out your review you clearly are. You want to support companies that made the original product and not the China product. But the "original" is made in China.
@holdernewtshesrearin5471
Жыл бұрын
I've owned half a dozen Ganzos including this G720 and all have been excellent. The G720 is a beast of a knife. Mine has a buttery smooth action and rock solid lockup and has proven quite durable. They're great budget knives. I bought it as a trial run before buying the LionSteel SR-1 which is SUPERB!
@WalkingOnWater86
7 жыл бұрын
Why not support it? If you can beat extreme useless prices from hyped up pieces of brittle non resharpening novelty steel keep the copy's coming imo. Love your channel btw!
@sunwalker2438
8 жыл бұрын
for me it's very simple. do companies have moral scruples making profit selling overpriced products, no! do i have moral scruples buying cheap clones, no!
@garryoldham8779
7 жыл бұрын
I have 2 of these knives along with a bunch of other Ganzo's and I've never had a problem with any of them, the only complaint I have is the axis lock is a bit stiff but nothing that can't be fixed. Zero blade play either up and down or side to side. I think they make great knives FOR THE PRICE. That being said I also have almost all the original brand name knives that I get "copies" of. Reason being I'm not going to take my 150 buck pm2 and bring it to work with me and destroy it, I'll light carry it and take my Ganzo 729 to work and still get the feel of the real deal at a great price and not care if it breaks. Just my 2cents, I think people are coming down too hard on Ganzo, if you don't like it then DON'T BUY IT, the same way if you don't want to or can't afford the brand names you don't buy them.
@raylcc2620
8 жыл бұрын
After carrying different Spyderco's for years, I have to say I like the Ganzo knives. Yes, they have to be sharpened more often, but the Ganzo G704 I have (bought after a positive review on this channel) holds up well and seems to be of surprising quality given that its a cheap "Chinese" knife. Plus, if I lose it or have to beat on it.. It's $20! I won't be crying at the loss/damage of my years-salary-priced knife. In the end, for me anyway, thats what a pocket knife is about. Need to cut something, take out the pocket knife and cut it. Not standing there debating if the item to be cut is worth risking the wildly expensive knife you are carrying.
@yannik246
7 жыл бұрын
I think the companies they take their designs from shouldn't care. The Ganzo G729 really impressed me with its design and made me buy a PM2.
@lobsterclown5224
3 жыл бұрын
I've got a ganzo. Absolutely great knife, super solid, razor sharp and super smooth action
@dreamstwice
6 жыл бұрын
Review ... dont preach.
@Cole3418
8 жыл бұрын
I bought one to throw in the collection and just to see the quality. Mine came dull and the lock it a bit stiff. Also, my budget for any knife is $50 max. I will never spend any more than that on a knife because there are so many good budget knives out there.
@Aconitum_napellus
8 жыл бұрын
Why is it that American knife production, more than anything else, is considered so fantastic?
@emm01000
7 жыл бұрын
Something Dreadful cause MERICA!
@jelteghtc
6 жыл бұрын
* cause DELUSIONAL!
@yehudah.718
5 жыл бұрын
Because they are proven to be better
@spress97
8 жыл бұрын
Hi Jeff to change the clip use the bottom of an old toothbrush and melt it mold it to the shape of that screw then let it solidify and you have a re-usable screwdriver.
@____stu____
8 жыл бұрын
Are you on drugs?
@aperture100
8 жыл бұрын
interesting idea
@RedRacconKing
8 жыл бұрын
+Stu Preston depends, are you a narc?
@packbadge
8 жыл бұрын
Why would you say that? It obviously sounds like he has done it and that it must have worked. Who would just randomly come up with that idea just to fool people?
@____stu____
8 жыл бұрын
A True Wisconsinite erm, because screw drivers ain't usually made out of plastic you fool! And why is it obvious he's tried it?
@Lilnasty-jo3dc
8 жыл бұрын
I will but Ganzos all day long! I own 2 now and I love them! Most knives are way overpriced and they are screwing the people who buy them! This proves you can get a great knife at a great price! Ganzos Rock!!!!!
@sethbitner6532
8 жыл бұрын
i have a G720 works great for my needs , dont get fooled by retail prices many are inflated knife companies still want to turn a profit
@rdietz68
7 жыл бұрын
Listen Up. The knife can't be passed off by some "poser" as a Lionsteel because GANZO stamps their brand right on the blade. There's more than 5 major design features different from Lionsteel mainly BLADE STEEL - thus the major $$$ difference. Patent laws in US don't apply to China and Lionsteel doesn't monopolize the knife design market. Similar - OK but don't be confused that this Chinese company is producing faux Louis Vuitton bags and labeling them Louis Vuitton - get it.
@Hungrybird474
2 жыл бұрын
Got it today . It’s nice . Happy about the buy . Not broken in yet but I can tell it’s a decent knife
@coryalansmith
8 жыл бұрын
I think it'd be great to see a side-by-side comparison of the original knife with the Ganzo knife. For the sake of cost savings, there are some stark differences between the Ganzo and the LionSteel. The ability of a blade to stay sharp is highly important to me, and while I'll admit to owning some of these cheaper knives, I think once many people use a blade that's made of good steel, it's hard to go back to using a knife made of inferior steel. The Sleipner used on the SR2A and the original SR1 is a great steel and the edge retention is pretty fantastic. While I've been able to sharpen a Ganzo knife to a pretty respectable edge, the retention of that edge is abysmal. For me, the time I spend to get it as sharp as I want it is worth something, and having to do it so much more often eventually negates any savings I get from buying the cheap knife.
@coryalansmith
8 жыл бұрын
This just isn't true. 440C is fine steel but it's not better than "most steels that knives up to $80-$100." Some examples of steels that are generally better that can be had in that price range are ZDP-189, CPM S-30V, D2, VG-10, the list goes on. There are a wealth of better steels with better heat treats from companies that back up their products. It's fine if you like a cheap knife (and some Ganzo knives are great values), but to say that Ganzo's 440C is better simply isn't true.
@nmfl100
7 жыл бұрын
So, your logic is: I won't buy a Ganzo knife because it's morally wrong, but I'll review it so that 18.000 + people get to know it better... right. I'd say you probably sold a lot of these knives with this review, cutlerylover (and there's nothing wrong with that, nobody will buy this instead of the Lionsteel original, apples and oranges).
@nelly19742012
7 жыл бұрын
my friend ive been watching your reviews for years. With that being said i usually agree with what you say in your reviews. But it seems that as you have grown in popularity, you have become more concerned with not being criticized rather than giving a solid unbiased review. This was not even a review. This was an excuse for you to bash a company you disagree with. Hope you go back to your old ways.
@cuffs50
8 жыл бұрын
brother you're past the point of having to explain yourself or justify your purchases. You just do your thing. Somebody is always gonna have a problem with something. just do your thing.
@cutlerylover
8 жыл бұрын
thanks I was just thinking out loud...lol
@BlazinBlades
8 жыл бұрын
Agree Give it to us as you see it: the good the bad and the ugly 😜 Each one of us can decide if it's their cup of tea or not.
@holdernewtshesrearin5471
Жыл бұрын
Btw snap ring pliers will work to remove the pocket clip/glass breaker.
@uncleboogie69
8 жыл бұрын
own three..amazing knives
@sameold77
8 жыл бұрын
This is a heavier but tough Ganzo. It can take some abuse. I like the newer Ganzo knives for sure.
@frankman7384
6 жыл бұрын
For proprietary hardware I use j-weld. I prepare the clay as directed. I then press it against the screw and use it as a mold or cast for my impression. I then remove it carefully BEFORE it fully hardens. I gently set it aside and let it fully harden. Then I use the homemade tool whenever I need to. One tube can make dozens of little tools like that for all sorts of weird shaped things.
@johnclark2278
8 жыл бұрын
Also all my Ganzos are dead center and smooth open and close and perfect retention!
@michelpham1681
8 жыл бұрын
I bought a ganzo 729 because of cultlerylover I've had it a month and love it
@TheKimjoh560
7 жыл бұрын
I collect knives of all kinds. Cheap and expensive alike as long as they are not crap or can't at least be turned into a nice knife with some elbow grease. I have all ganzo automatics and maybe 20 or 30 other Ganzos. I also have a bunch of other simililiarly priced knives from brands like Sanrenmu and Brother. When people say "knives like Ganzos have a place" I get very curious.. what other knives are there like these? Because I have never picked up anything this price range that quite compares when it comes to value for money an consistency in quality. I never got a single Ganzo "lemon". I believe I paid $14 including shipping for this knife. This model is decent but as the saying goes, a chain is never stronger than its weakest link. This massive thick blade adds nothing to this knife but bulk and likeness to the SR1, because even at half the thickness the lock will give out long before the blade.
@johnniewalker3134
8 жыл бұрын
Hammond Cruiser by CRKT is a really good low end price point affordable knife
@nycbike73
8 жыл бұрын
I have the rat looking model and 4 other Ganzo knives so far they all work very well and the quality is very good. Because of the paramilitary look alike model I m going to go buy the spyderco paramilitary two.
@MrPlecemanvpd
7 ай бұрын
I have 2 Benchmades with the centering off. Griptilian 551 and 551-1. The 551-1 also has machining marks. My 940 and bug out no issues. Yet I can buy a ganzo have perfect centering and 0 machining marks. Imagine that
@farmninja6653
8 жыл бұрын
I got the orange one and it was very easy to sharpen.
@sethkhaine48
8 жыл бұрын
If you look to the glassbreaker more carefully, you can notice a small darker area by center of it, the top. It is because top is hardened enough to leave deep scratches on even ceramic plates, as I tried. So dremel here is off the charts.
@MusicalWeasel
8 жыл бұрын
Yay!! Another video! Thanks Jeff!
@Macgyver46
8 жыл бұрын
I have had many knives and really want a large collection. I will always use a less $$$ knife over a $200 blade. the only folder blade over $50 I would use hard would be cold steel.
@mropinion6903
8 жыл бұрын
Lol i just happened to get a lion steel sr1 in purple this afternoon. Cant wait to get it. Great vid as always jeff!
@BabakPA
8 жыл бұрын
I didn't know they come in purple as well! I thought that was a nutnfancy production run! That's awesome! Good for you!
@mropinion6903
8 жыл бұрын
+Babak P that is part of the TNP run! I was lucky enough for find one for a good price ($150) and i jumped on it. So happy to get it
@BabakPA
8 жыл бұрын
+MrOpinion that's awesome man :) I am very happy for you! I love the clip point blades on the TNP versions!
@brfam1977
Жыл бұрын
I knew about this knife before I knew about lion steel. I have 2 Spyderco para 2’s and I prefer this knife over those two because i don’t want to damage of lose my more expensive knifes.
@Hungrybird474
2 жыл бұрын
Might need some work but for those who like to fit and finish to their liking this is a great knife imo. If u want to spend $200 that’s fine . Two different knives that look the same
@pickledbologna
8 жыл бұрын
My Rat 1 Ganzo copy was pretty comparable to the real thing .... and until Spyderco comes out with a Byrd version of the paramilitary 2. I will buy the Ganzo copy with a clear conscience.. Of course I will buy the Spyderco too!
@esrahansenoutdoorsandselfr563
8 жыл бұрын
great video i think knives like this have a place so good on you for doing it
@KebabEater
8 жыл бұрын
Bought 3 Ganzo's Which Just arrived My Para Military Copy is very screechy when Using it, Also have cut myself from the "Spydie hole" because its sharp. the others are nice and smooth
@noahkoenig4447
7 жыл бұрын
this, the ontario utilitac 2, or the Buck Vantage Select Large?
@Player_Review
8 жыл бұрын
Thanks for the review, I usually don't like the Ganzo reviews. Appreciated the objective review and analysis on the knife market, including the consumers. It is really difficult to say anything negative about Ganzos without inciting an uproarious mob with pitchforks and torches at your door.
@TobiasYoderFpv
8 жыл бұрын
Remember when Jeff reviewed the authentic knife and not clones?
@johnclark2278
8 жыл бұрын
Lionsteel knives are made in Italy so your not taking away from a American company. I own plenty of name brand knives and also Ganzo knives there is a market for all knives if you love knives you would understand that.
@dominicmartinez4448
8 жыл бұрын
Please do an updated gun collection
@joeroy8354
7 жыл бұрын
Jeff!! Been a sub for 4-5 years and never really comment or PM you bc I'm not too technical that's just too much for me. Any way always enjoy You vids all of them. Just got my First Ganzo today it's the one our reviewing and I'm really shocked at the quality it took me years to pull trigger on these "copy" knives but I had to try one
@retrogamingrocks
5 ай бұрын
So I have seen quite a few videos reviewing this knife and most have been awesome and positive. While I am all for supporting American businesses, honestly American made knives of the quality of some of the Ganzo knives I own would cost 3 or 4 times as much. I do own several American made knives and they are good but so are Ganzo s. I would argue that 98% of urban dwellers who want to have a pocket knife have no need or reason to buy a 100 or 200 dollars knife, other than for collecting purposes. There is nothing a 200 dollar knife can do that a budget knife cant do. Now will you need to sharpen a budget knife a bit more often? Maybe, depends on how much use you give it but other than that a ganzo a stivien, an eafengrow and many other Chinese knives will be more than any urban dwellers needs. Having said that, if you go out in the wild every weekend or you have a job where you need to be cutting things continuously then maybe yes go ahead and buy an expensive knife, otherwise no reason. Now the lionsteel knife from which Ganzo COPIED the design is around $200 or more. Now let's talk about that, that knife is made in Italy with 2D steel which is what most Ganzos are made with, this one happens to be 440c. Additionally the frame lock of the Lionsteel failed in open close tests, which is why they added an additional safety lock. The main difference is that ganzo has G10 scales and the other one has an aluminum handle. Now I wish American knives weren't so expensive, the reality is that a lot of people cannot afford knives like Benchmade, which keep getting pricier all the time, and also the realization that for every day common cutting and doing things with a knife, there is no need to spend 50, 100 or more for a pocket knife. Even some American companies like Spider o have created a separa brand (Byrd) of knives made in China because they know that many people cannot afor to spend 80,100 or more on a knife. I know a lot of people will disagree with my comment, and it is ok. I'm all for supporting American made products but when reality many have to choose between a $200 and $25 knife and putting food on the table, the choice is clear.
@RecicledCanadian
8 жыл бұрын
As you can guess from my YT name I'm an old fashion wet straight razor shaver. Believe me or not, but shaving is one of my hobbies. I have extensive collection of wet shaving gear. Among around 40 different shaving soaps 30 shaving creams I own around 20 shaving brushes and 27 straight razors. i own super dupe premium silver tip badger brushes made in Portugal ($200 CAD) made in Germany ($280 CAD) end my THE BEST badger shaving brushes ( $25 CAD) are made and purchased in China. Also one of my the best straight razors is made and purchased in China. My dear friend all that BS is about branding.
@OnAirVoice
8 жыл бұрын
Picked up one from Amazon, nice lil' knife for the price.
@nissanlord
8 жыл бұрын
I own the Lionsteel SR1 custom version that's so pretty I'm afraid to use it much so getting this one makes sense to me lol
@grumpyoldphart7325
8 жыл бұрын
I ordered a Ganzo knife and the lock release is all messed up. You get what you pay for.
@themadhookerbro1
8 жыл бұрын
that knifes amazing ive hade MY for 7years
@drengskap
4 жыл бұрын
Circlip pliers will unscrew that pocket clip screw, no problem.
@dalecarpenter8828
7 жыл бұрын
I got the miss on the rat 1 and rat 2 .so the conpany they copied has just as many misses .i know from experience .
@eliheakins5217
8 жыл бұрын
I am alright with cheap copies. A guy who is buying $20 knives isn't even going to think of buying a $200 knife.
@cameronwilliams4149
8 жыл бұрын
not true for all, I have the rift copy and would hope to get a real one in the future, either that or a custom with similar blade shape
@eliheakins5217
8 жыл бұрын
cameron williams Okay, but you getting the copy helped the knife company in that case.
@cameronwilliams4149
8 жыл бұрын
Eliheak most definitely, these copies give you nice taste
@adamjohnson7931
8 жыл бұрын
Since you don't like what Ganzo is doing you can just pass those knives along to someone who would appreciate having them.
@74u85
8 жыл бұрын
MORE GANZO REVIEW'S.... or just more budget blades
@BabakPA
8 жыл бұрын
Thank you for the video! I actually prefer the axis lock to the frame lock lion steel uses! Perhaps they will see this knife and make the sr1 in axis lock version as well
@dalecarpenter8828
7 жыл бұрын
I was holding the cull rat 2 while watching your vid .
@michiganedge4770
8 жыл бұрын
snap ring pliers for the pocket clip screw
@jacobmanalang8162
8 жыл бұрын
OH! i didnt think of that! i was wondering how the hell i would get that off of there HAHAHAA thanks man!
@michiganedge4770
8 жыл бұрын
No problem bro. It's actually a good design. Less likely to strip
@jacobmanalang8162
8 жыл бұрын
when i got this knife i saw that and was like WHAT THE HELL do i do here? i almost thought i had to buy the actual tool from lion steel lol
@dalecarpenter8828
7 жыл бұрын
Most of the hard ware the chinese are using is 440 at 45 hrc .most ! They use d2 steel mostly to at 58-60 hrc .
@-BWS-
6 жыл бұрын
Thinking about getting a ganzo
@hamschh
8 жыл бұрын
If a knife is $250 bucks, companies have every right to copy it for a cheaper price.
@alexcunningham1647
8 жыл бұрын
would you ever consider reviewing straight razors
@loganketron9527
8 жыл бұрын
Hey Jeff!! Was wondering if In the future when you do more Ganzo fake reviews and happen to have the knife Ganzo is copying if you could get it out to do a side by side comparison?
@rollinlikeariver7756
7 жыл бұрын
Moral stance is you are still supporting the company and the blade by doing the review. Doesn't bother me though.
@chriselliott484
6 жыл бұрын
But Jeff you reviewed ganzo knifes before how is it better or worse than the firebird
@Daily-Internet-Diary
8 жыл бұрын
PLEASE MONETIZE YOUR VIDEOS IT WILL HELP YOU GET MORE KNIFES TO REVIEW I PROMISE WE DONT CARE !
@GOonTedgi
8 жыл бұрын
He doesn't monetize his videos?
@Daily-Internet-Diary
8 жыл бұрын
+Gamertag Woody no he doesn't , he needs to though , I'm sure no one would care
@alldayedcers9454
8 жыл бұрын
He already does
@Daily-Internet-Diary
8 жыл бұрын
+All Day EDCers he just started
@welovetheoutdoors4834
5 жыл бұрын
In all honesty, these are very good knifes for the money. About the qc deal....... it’s a 20 dollar knife, what do u expect. I will say that they are better at qc than a real BM!
@mk45gunnr25
3 жыл бұрын
I'll put my 2 cents here. I look at what some companies charge for their knives and laugh out loud. Lion steel for 230 or Ganzo for 20? Ganzo thank you. Lion steel can take their 200 knife and take a long walk off a short pier
@treerat7631
4 жыл бұрын
Ganzo firebird are very well made kife
@ronstoner1823
Жыл бұрын
I love Ganzo knives. I have several of them, never bought one that I didn't like. To me spending over $100 on a knife is ridiculous and a huge waste of money. I'll take a Ganzo over a lion steel any day of the week and twice on Sunday.
@druidic4353
Жыл бұрын
What about the kershaw link at 91. It's in 20cv and American made. Great knife.
@freddygonzalez3511
8 жыл бұрын
I bought two.great knife
@BROSIDEGAMING
8 жыл бұрын
Please do a review on the Boker plus tech tool 1
@cloudcloudly
8 жыл бұрын
Which would be your favorite Ganzo knife?
@elcas20012003
8 жыл бұрын
Thx for the vid, (5min to get to the meat is a bit long though)
@TacticalPatriot-hd7hl
8 жыл бұрын
Please do more videos on budget knives :)
@thomasbonnington7130
8 жыл бұрын
Thanks jeff
@nathanmcelyea9650
8 жыл бұрын
nice video man. I collect knifes my self but I'm broke lol
@aleksatadic6
8 жыл бұрын
Will/would you make a review on the Mtech Twist Butterfly Knife?
@brucewilson77
8 жыл бұрын
I thought no it's terrible how that company is getting ripped off. I'm going to order a few of the just to see how bad they are!
Пікірлер: 253