Excellent knife vice Sturdy construction very well made
@DBCraftWorld
2 жыл бұрын
I wouldn't change a thing! Simple, well made and very aesthetic! Great job Jon!
@jonstynes6365
2 жыл бұрын
Thanks bud
@HoutmeyersP
2 жыл бұрын
I think this vice is about the best i have seen until this day. I subscribed instantly for later vids on knifemaking.
@johnjude2685
Жыл бұрын
That slot might let huge jungle knives and lawnmower blades Thanks I'm busy with this today and will be painting before dark.
@shonp4120
7 ай бұрын
Yours is the best by far , going to make mine just like it !!! Thank you , awesome video
@johnjude2685
Жыл бұрын
Gary Houston BlackSmith built one much like this but your's tilting and good addition for the built I will do some figure I'll make one to handle lawnmower blades also thanks for the teaching Sir and I'll get back to knives and hopefully get your advice on knives also so I subscribed 👍 thumbs high!
@robertdominiczak6523
2 жыл бұрын
I don’t make knives but you have solved a problem I’ve been having. Great job 👏
@johnrizzato9192
7 ай бұрын
I think it’s awesome how you recycle! I enjoy doing the same thing. I think part of the fun is to make what you have work and figuring out how it goes together. Like you did with the anchor bolt.
@johnjude2685
Жыл бұрын
Today I finished my and much like yours ( pretty much copy yours. Did check out several videos of others building much like yours. Thanks for the teaching Sir
@timwalters1762
2 жыл бұрын
I work building exhibitions in a museum. I work in various materials of varying shapes. I could see making different clamping plates to fit different shapes - round, square, tapered etc. Brilliant design, well crafted, a pleasure to watch. Thank you
@homemadetools
2 жыл бұрын
Nice job again. We shared this video on our homemade tools forum this week 😎
@toadpond101
2 жыл бұрын
That was a very good video. Thank you for taking the time to make this for all of us. I do like the build design!
@jonstynes6365
2 жыл бұрын
Thank you Greg, no problem at all, I love projects like this
@johnjude2685
Жыл бұрын
Love the extension and the whole build. Except your logo I'll add mine and build this Thanks and very easy video. So many builders think I need to hear hammering and grinding but I don't like the noise also my family is sometimes present Thanks
@DrMrSmooth
2 жыл бұрын
Nice video mate 👍
@dormindont1
2 жыл бұрын
удобная и полезная конструкция!
@tonycee1144
2 жыл бұрын
molto inderestante liked good luck
@darrenlucke
2 жыл бұрын
Looks like it’ll work very well!
@vancleiramos5961
2 жыл бұрын
Muito bom!! Trabalho top...
@agentcovert
2 жыл бұрын
Great build..the only other feature could be a different base plate such as a half circle / protractor style base to make a swivel base to clock it at different angles besides the 90° to the work bench without having to remount it if needed from time to time..might never use the feature but it would be ready if needed..like a swivel base bench vise has..A full circle base would limit the tilt down feature so a half circle 180° swivel may be the best option..
@alessioceccano
2 жыл бұрын
Thank you 👋
@Hazehellivo
Жыл бұрын
I do like your design and looks cool, however it can be improved, putting at stop pin trough the inner pipe to the aluminum would prevent the jaws from sliding off, dont have to hold them when taking the blade off or adjusting position of the vise. Thanks
@joemcgarry1106
2 жыл бұрын
First class build!
@knarsdaleforge2787
2 жыл бұрын
Thanks Joe
@stephenjourdain1842
2 жыл бұрын
Very nice off the cuff build, one little extra, I'm thinking an adjustable extension off to the side for a rod attached to a stone or file to shape/sharpen the edges of the blade, you have the long tongue to support the blade during the shaping/sharpening process.
@knarsdaleforge2787
2 жыл бұрын
Thanks Stephen, nice idea, I think I'll try that
@MuhammadAfzal-jm6cw
2 жыл бұрын
Good 👍
@kentuckytrapper780
2 жыл бұрын
NICE "
@neilwalker3204
2 жыл бұрын
I will be taking this and building my own. (hope you don't mind.. :) )
@knarsdaleforge2787
2 жыл бұрын
I'd be honoured Neil, I hope I've give all the information you need.
@neilwalker3204
2 жыл бұрын
Finished my vice, the only real change I made was the baseplate where I used some angle iron. I can then either clamp the vice to my bench or use my bench vice to hold this knife vise. I powdercoated it with Dulux natural bronze, all i need to do now is design a logo.. drive.google.com/file/d/10f0qxvho1-afmbwZvpELvqk1IT7rXmok/view?usp=sharing
@knarsdaleforge2787
2 жыл бұрын
@@neilwalker3204 I saw it on Facebook, great job and nice idea with the angle for the base
@neilwalker3204
2 жыл бұрын
@@knarsdaleforge2787 I couldn't link your video in the main part of the post, FB rejected the post but I could as a response, go figure.. Thanks for the idea, now I need to make a knife! :)
@janikumlander1822
7 ай бұрын
Plans?
@jefflynam6058
6 ай бұрын
I send you my address and then you send me the clamp.. great video and great build man. I'll be checking my mailbox everyday😊
Пікірлер: 36