How much muk could a Nessmuk muk if a Nessmuk could muk muk?
@fcadcock
7 ай бұрын
7
@mcsquirgle
7 ай бұрын
A Nessmuk could muk what a Nessmuk would muk
@chrisjohnson9542
7 ай бұрын
A whole muk of nesses
@homeofinventions
7 ай бұрын
WTF?
@John-tx1wk
7 ай бұрын
All of it?
@michaelinsc9724
7 ай бұрын
Kershaw Bel Air is USA Made, CPM Magnacut, crossbar lock, aluminum scales, and street prices are around $160. FABULOUS KNIFE!!!
@noahlar
7 ай бұрын
Mine hits the mailbox today. Can't wait to get my hands on it. Surprised it didn't get mentioned being so new to the market!
@sodathief
7 ай бұрын
Mines on order from knife center. I look forward to it
@knifecenter
7 ай бұрын
$149.95 at KnifeCenter ;) -DCA
@michaelinsc9724
7 ай бұрын
Yeah, to me it's better than what you end up with after you put metal scales on a Bugout to get rid of the flex.
@bornonthebattlefront4883
6 ай бұрын
The Bel Air is kinda nutty, Kershaw isn’t usually into making high end stuff, more just value, mass market stuff Came out of nowhere with some actually really good knives of late
@mcsquirgle
7 ай бұрын
The point Thomas made struck a chord with me today. "Pick the knife with the best handle". I have handled a lot of the current heavy hitters in the industry today. Spyderco's, Benchmade's, Hogue, etc. I was totally unprepared for it the other day when a friend handed me his old Kershaw Blur. I was super impressed by how comfortable that knife is in hand and was quite surprised by it. I think that knife has been overlooked a bit. I don't even mind the assisted action on it. It just comes off as such a good working folder
@1980JPA
7 ай бұрын
It was one of my first knives and haven't had one in literally more than a decade but with the new magnacut version I'll probably be grabbing one. Partially for nostalgia, partly because it's just a good knife.
@mcsquirgle
7 ай бұрын
@@1980JPA I ordered one of the magnacut versions from KnifeCenter a couple days ago. Can't wait for it to arrive. Blue aluminum with stonewashed magnacut nlade
@1980JPA
7 ай бұрын
@@mcsquirgle love those colors, that's what I'll have to get.
@nickiesiple5222
7 ай бұрын
Yes. I agree. I didn't care that it was in S30V.
@nickiesiple5222
7 ай бұрын
@@mcsquirglethat's frigging exciting
@arrowheadguys7637
7 ай бұрын
Also excited about the Bodacious, I'm not a fan of the 50/50 finger choil thing Spyderco does with most their knives, so that'll be a good one for me. Gimme all that cutting edge!
@maybefrank8345
7 ай бұрын
Right!? I mean I don’t need that much cutting edge but i DEFINITELY don’t want a 7 inch handle?😂
@arrowheadguys7637
7 ай бұрын
@maybefrank8345 yeah I just don't like anything about them personally. I don't want to change grip positions to choke up on the blade. Now I just gotta wait for them to do a version in one of the steels I fan for lol
@nickiesiple5222
7 ай бұрын
I agree! I hate finger choils and sharpening notches
@ImOnTheEdge
7 ай бұрын
Just got my Spyderco Manix 2 Salt Lock Folding Knife with CPM-MagnaCut Blade. Maybe the best, coolest knife I've had in a very long time.
@TovarichSputnik
7 ай бұрын
I maintain that liner/frame lock is lefty friendly. I'm left handed and find it very simple and comfortable.
@ramzcoldlampin5460
7 ай бұрын
Agreed! Just make the pocket clip reversible 👍
@chrisoneill325
7 ай бұрын
My coworkers are why I carry a utility knife. It cost me $10 and the blades are dirt cheap. There are only one or two who I would trust to not mess up one of my regular knives.
@JROTCBALL
7 ай бұрын
I got my dad a LW Endela with a combo blade for his bday.. he’s a mechanic so those serrations come in handy for him.
@timtitus2532
7 ай бұрын
I think there was an obvious suggestion for the ambidextrous knife that may have been overlooked, the Vision FG from Civivi.
@nickiesiple5222
7 ай бұрын
I was looking at them today because Birdshot IV raves about that model.
@mikerollins3088
7 ай бұрын
@nickiesiple5222 It's a great knife! I got the damascus in white g10 version. It looks great, its fidgety, and its a good size edc reverse tanto blade shape. (which is one of my fav other than wharnie)
@duaneraymond4252
7 ай бұрын
David, please do a segment on 14C28N fixed and folding knives that would have the best shapes for kitchen work.
@Legato-2057
7 ай бұрын
My recent answer to the $200 question was the Demko Shark Cub. Still waiting for it to arrive, but I loved my AD20.5, and the Shark Cub fixes the few little issues it had.
@hectorthrills8193
7 ай бұрын
What issues?
@Legato-2057
7 ай бұрын
@@hectorthrills8193 I found the thumb studs get caught sometimes when putting it in my pocket, I loved the Titanium scales, w/3V blade is very nice, but it’s a little heavy. But the action on the knife is still amazing and a great fidget toy, but I rarely actually carry it.
@TwitchRadio
7 ай бұрын
I love the drop bear... But I also like my qsp canary (neck and folder) for my beat it up knife... My two go twos %80 of the time... Waiting on the big fixed blade to come out from qsp... 😎✌️
@nickiesiple5222
7 ай бұрын
I was studying the neck and folder today. I'm glad they work for you, it's good to hear you get a lot of use from them
@TwitchRadio
7 ай бұрын
@@nickiesiple5222 yeah, going to do a one year review on the neck knife here in the next week or so (stepping away from music)
@jfh667
7 ай бұрын
Benchmade are so nice for lefties. I personally went with the Griptilian, Im thinking of upgrading to the Fact.
@fcadcock
7 ай бұрын
The fact is one of my least favorite Benchmade knives. The auto is awesome, but the manual one just has really uncomfortable scales on it.
@jfh667
7 ай бұрын
@@fcadcock Good point. I went with the Bailout.
@dennishayslip4605
7 ай бұрын
How about the Sig Sauer by Hogue K320 in CPM S30V?
@OnlyGamingClips
6 ай бұрын
I rotate between my Spydie Stretch 2's. I usually carry my VG10 model. But once in a while I'll carry the K390 one, and then I carry an MKM Isonzo one in marbled carbon fiber, the other bronzed Ti. These are my fav edc knives to carry.
@jonathancupp3686
7 ай бұрын
I absolutely love the colors of that Drop Bear. I wish it came on a sub 4” fixie though, as I like to carry fixies much better than folders.
@mikeh5967
7 ай бұрын
Look at asher knives, they have a fixed blade called the Fixie. It is 3.2" of S90v with a slim kydex sheath and attached belt/ pocket clip. It's invisible under my shirt. I love it.
@jonathancupp3686
7 ай бұрын
@@mikeh5967 lately I’ve been carrying the MKM Terzuola TPF in Magnacut and carbon fiber. Great little fixie, but I still want the WT Nomad edc.
@nickiesiple5222
7 ай бұрын
@@jonathancupp3686wtG Nomad EDC is just incredible. DCA showed it to me back when one could get it from Taiwan direct from maker. I wanted the old one in ATS-34 because the handle had a swelled woodgrain texture, but I'm still inordinately pleased with mine, plus my favorite N690!
@mikerollins3088
7 ай бұрын
@jonathancupp3686 I hear ya. Have you seen the Kizer Begleiter but in fixed blade form? Tbise are kinda cool!
@jonathancupp3686
7 ай бұрын
@@mikerollins3088 yeah, they are.
@gm5216
7 ай бұрын
DCA, you hit on something that has kept me from getting an OTF. It seems like they all fall into one of two camps: stiletto or a pretty thick, “non-slicey” blade. But today you mentioned that the Shootout has a more “slicey” shape than others. This makes me think that maybe I just haven’t seen enough OTFs to know what’s available, and maybe I could actually find one I like. So, my question to you is: what are all the various blade shapes that someone can get in an OTF?
@NathanScooterKile
7 ай бұрын
Most overlooked knives. Thinking along the lines of grizzly ridge and ultimate hunter are two that come to mind
@stuartrollings602
7 ай бұрын
The Joker with the curly birch is as comfortable as it gets! Have and like the Becker as well but not as good a fit for my comfort!
@Matthew-fd6mj
7 ай бұрын
I rig cargo for airdrop and day to day duties consist of cutting cardboard, webbing, and ropes. What knife would you recommend? And are old school rigging knives with marlin spikes worth looking into?
@Jeremy-Two
7 ай бұрын
Cold Steel SR1 folder.
@dutchanimal010
7 ай бұрын
best ambi EDC? Stretch 2 K390, or the Magnacut Salt version of either Native 5 or Manix 2!
@duanerowland2453
7 ай бұрын
My grandfather, a sailor, used to carry a Buck pocket knife with a marlinspike on the back, for splicing rope. He used to say it was a holdover from his days in the Navy. My question is, in today's marketplace, what would be an excellent Sailor's folding knife in the sub-$250 range?
@mikep3043
7 ай бұрын
Look at myerchin
@gcvrsa
7 ай бұрын
Myerchin
@Davidwalker-iv1gc
7 ай бұрын
Hey Knifecenter. It seems like everyone is after super steels that cut forever these days. Could you recommend a folder that prioritizes toughness instead of edge retention? I don’t mind sharpening but I dislike chipped edges. I’m looking for something around 3” give or take and under $250 that can take some abuse. Thanks.
@richardkev3077
11 күн бұрын
“I will probably only do this once” Famous last words.
@oscarbaltazar8120
7 ай бұрын
Hey DCA I’ve been carrying a Spyderco NATIVE 5 for the past few weeks and I’ve come across a problem… it’s a larger than average knife so I was looking to get a companion knife something I can use when discretion is the name of the game. Preferably something in the 3 inch range with a Lockback or slip joint. Bonus points for no pocket clip!
@joshuaritzheimer1382
7 ай бұрын
As Frodo and Sam trekked to Mordor, what pocket knife do you think Sam would have carried? He was a gardener by trade and passion, he prepared the food (when they had it), and he was outside in the elements for most of that time and so was faced with all the basic tasks an outdoorsman would be.
@sodathief
7 ай бұрын
Wow that knife center drop bear is awesome!
@lordquenntillieusiii9250
3 ай бұрын
The Shark Lock is definitely a much better ambi lock than the crossbar lock it is stronger only needs and index finger to actuate so less repositioning is required is easier to use with glove and doesn't use omega springs When (not if) on a one and done knife those omega springs break you don't have a knife until you get them replaced
@shaunm5122
7 ай бұрын
This was the perfect opportunity to showcase your exclusive deka in gmascus and magnacut! I carry one daily👍🏻
@terrymccann9715
7 ай бұрын
A perhaps challenging question. The best knife for one who lives in England. Silly darn laws we have here dear sir! So to simplify it somewhat, blade of no more than three inches, folding knife, manual opening, non-locking. But to make it a little more fun, as expensive as you like. My only current knife is a custom slip joint by Vincenzo Ballistreri, which cost around £650.
@Nudel-nc1cp
7 ай бұрын
butter knoife 😂
@bokusimondesu
7 ай бұрын
jack wolf
@Ericstraordinary
7 ай бұрын
A great Ambi one-and-done EDC knife could also be the Spyderco Native 5 in Magnacut. At first glance the blade length may seem too short, but I think it is in the Goldilocks zone for EDC.
@Joshua-lx4ck
7 ай бұрын
Honestly, the Flytanium Arcade has been my favorite over the past year or so
@lmcq784
7 ай бұрын
12:54 I’m surprised to not see the Hogue Deka in the crossbar lock selection. Also surprised to not see a CIVIVI Vision FG in your non-crossbar lock mentions! Ambidextrous, light, strong lock, affordable (can buy 2 for less than $200), and even fidgety.
@jgods
7 ай бұрын
What causes side to side blade play in a folding knife? Is this more common on knives with bearings or washers (or does “bearings vs washers” even matter here)?
@Jonny_Bo_Bonny
7 ай бұрын
Hey, DCA, Seth, and Thomas! Love the channel. And congrats DCA, on your new knife design, the MKM Pocket Tango! You can honestly make a shaving KniFAQ video with these 3 questions. #1- I saw the Petrified Fish Scholar and Artisan Cutlery Orthodox on your website and thought about the idea of shaving with a pocket knife. Apart from the obvious choice of just using a straight razor, would either of these be an ideal choice for a dedicated shaving pocket knife? #2- For us EDC enthusiasts trying to find additional excuses to use our pocket knives for more than just opening boxes, what are the knife specs best for shaving? Specifically, blade shapes, blade grinds, blade steels, blade finishes, handle materials, and locking mechanisms would be optimal? Any knives that you would recommend with all of these criteria? #3- For those who don't want to use safety razors, electric shavers, or pocket knives, what startles steel straight razors would you recommend? This would not use replaceable blades, nor would it be made of carbon steel. Instead, it would focus on corrosion resistance and edge retention. Bonus, if you can make 2 recommendations at least: one for best budget choice and another best premium choice. Thank you!
@mikeh5967
7 ай бұрын
Best 200 knife, if u can have an auto, is $130. Kershaw Launch 15. 3.5" magnacut blade, only 3.1 oz. Small and reversible pocket clip and cool black washed spear point blade shape. Amazing value for magnacut ultralight auto.
@vajuarez0193
7 ай бұрын
Just like checking the chamber when handing over a gun, never hand over an open knife.
@ruslangabitov5202
7 ай бұрын
Microtech MSI as folder and ColdSteel SRK as fix for $200 and another 200 bucks for beer!
@zthirtytwo
7 ай бұрын
DCA annd company .I enjoy watching your videos. I’d like to learn more about how different blade shapes and how serrations cut on various materials. Could you do a visual comparison on the advantages and disadvantages of certain blade shapes and grinds though various materials. E.g. plain vs serrated on ropes, most efficient blade shape for cardboard etc.etc. Thanks.
@bohonea1602
7 ай бұрын
Most serious question of the day !!!! Which type of blade would a professional vampire hunter actually use ?
@Randy_G
7 ай бұрын
QUESTION - what is the best edge angle for M390 - Ketuo Triad
@fcadcock
7 ай бұрын
Depends on much more than steel alone. What will it be used for? The harder the task, the wider the angle should be. How willing are you to maintain it yourself? You can get away with a lower angle if you are going to be taking care of it yourself vs sending it out to be sharpened. What's the heat treat like? Better heat treats allow narrower angles.
@ChampionCorner
7 ай бұрын
Hey guys, how about best folding knives under $50 and $100 with deep carry, flush mounted, recessed screws pocket clips? Bonus points if the knife has a blockout plate in cases of reverse pocket clip capabilities.
@jacobrotenberger4952
7 ай бұрын
Could you do a deep dive into the pocket tango? Such as how much space it takes in the pocket.
@cityhick1987
7 ай бұрын
The Flytanium Arcade is a pretty good ambi $200 dollar option. Really like the Shark cub too, but it may be a tad small for one and done.
@knifecenter
7 ай бұрын
I considered the Shark Cub and decided against it for exactly that reason. Arcade is a decent pick! I'd be more jazzed about it if it didn't require modding to make the pocket clip lefty friendly. -DCA
@kennkingg
7 ай бұрын
Microtech msi non g10 version is 175 and it’s amazing
@danwoods8195
7 ай бұрын
just bought a shaman on blade binge for 200-- and a ultratech-- good week.
@fallinmor
7 ай бұрын
I feel like an old man. I am but here goes. PM2 all day. I’ve had my s30v plain Jane for a decade now and it’s still chugging like day one.
@KepmukNesshart
7 ай бұрын
Why would anyone ever pick a Nessmuk or a Kephart? Just pick BOTH of them.
@nickiesiple5222
7 ай бұрын
You're far from mistaken!
@knifecenter
7 ай бұрын
Wisdom
@bigjake6foot5
7 ай бұрын
Here's a serious question. What is the knife or price that embodies the line of diminishing return? In other words, what knife has such a value that every dollar you spent past it doesn't provide you the same return as what that knife did from zero. I've long thought the $200ish 20cv Protech Malibu was the line for a while. Yes you could spend more than that but there was not specific feature or function that you could really see any meaningful returns.
@israelchildress4523
7 ай бұрын
Totally agree with DCA on the first 2 folders he mentioned 👏 2 bangers 💯
@fg63-6
7 ай бұрын
Say I wanted to add a fork to my EDC, what would my options be? Does something like a swiss army knife fork exist? The fabled gentlemen's hobo knife perhaps?
@KevinAult-kx7qd
7 ай бұрын
My son and a couple of his friends are graduating this year. I would like to give them a decent fixed blade knife as a graduation gift. The primary intent is for hunting and camping. I want an emphasis on strength and durability. The knives that I am considering are the Victorinox Venture, the Ruike Jager, and the Joker Campero. I am leaning towards the Ruike based solely on blade thickness, but I am interested in your opinion on that matter. Is there another stainless knife in the $75 to $100 price range that you recommend? Thank you for your insight, Kevin
@StuartButler-ds5dg
7 ай бұрын
I think there's a saying "the easiest way to lose a friend? Lend them tools"😂😂😂
@lando8913
7 ай бұрын
That gerber savvy has the exact same shape as the piratech kraken. Don't all the cormorants fail the spine whack?
@volkstouareg5620
7 ай бұрын
I'd like to see a video talking about the pro's and con's of all Benchmade mini's and ranking them but also including an alternative brand model if you think it's better.
@baddestmofoalive
7 ай бұрын
If you believe in the 2nd Amendment, I would pass on BenchMade.
@davidgarrett5671
7 ай бұрын
@@baddestmofoalivewhy? The whole internet story that won’t die is bogus. Don’t believe it.
@baddestmofoalive
7 ай бұрын
@@davidgarrett5671 I literally watched it unfold in real time. Les De Asis even made a non-apology video about it but wouldn’t outright condemn the donations to gungrabbing liberal candidates
@davidgarrett5671
7 ай бұрын
@@baddestmofoalive I checked the records for all of the years in question. There were no political donations by Benchmade and they do not have a PAC. And not all Democrats are “gun grabbing liberal candidates”. So what did you see unfold?
@benwalters2192
7 ай бұрын
Hey Hey. I find many fixed blades and folders have thin tips. While this is good for many applications, I prefer strong tips, just a personal preference. I would be grateful if you could suggest some folding knives (3-4 inches) and fixed blades (4-5 inches) with robust tips. Stainless preferred, up to $200, not that I mind if it's below that price. Congrats on the pocket tango, it will be fun to watch you introduce it on the new knives of the week video.
@vme8611
7 ай бұрын
Longtime listener, second time question. Kitchen knives. I have my 20 year old Wustof 10” chef, go to Spyderco Bow River, and Condor CTK230-4HC Nessmuk Camp Knife 4" as my daily use. Anything I might be missing (or an excuse for another fixed blade?) PS- already have the MKM preordered. 🎉
@dennisgrimm
7 ай бұрын
What knifeis the most fun to reverse flick with a snappy sound? Bonus points if you can suggest a couple knife with different locking types
@ZiGGi03
7 ай бұрын
Personally the Benchmade 940 is a bit outdated . I’d rather anything else to be honest feels like you get a 940 when you already have everything else and you just want to round out a collection. Other than that theirs so much choice nowadays
@chrisjosekuehl
7 ай бұрын
My question is, what folder with a convex or scandivex do you like and why do you think there aren’t more out there?
@jufuh1503
7 ай бұрын
Hi DCA (and Thomas) , i'd like to know what's the difference in toughness between carbon steel and stainless? On paper, some stainless (like the Sandvik familly) are tougher than many carbon, yet in practice carbon seems thougher. What am i missing? If you really need a serious question: would you say you get high on your own stuff? Thanks guys, keep on the great job!
@cemetarygates2800
7 ай бұрын
Sure thought a Hogue DEKA in magnacut would have made the list?...
@corporalpunish6089
7 ай бұрын
Take a look at the new Kershaw Belair. I almost didnt buy it because I have the Deka, but glad I did. Action is much better. Getting lots of pocket time.
@parkewalton
7 ай бұрын
Man para 3 should’ve been mentioned for that $200 range but glad spyderco was mentioned. Is the compression lock too right handed friendly? Honestly idk. Hogue deka too.
@knifecenter
7 ай бұрын
Although I have heard plenty of lefties have adapted to the right-handed compression lock, there are other truly ambidextrous locks out there, so I don't really consider it when ambi is requested, as in this case. Cheers! -DCA
@bodegavega
7 ай бұрын
I have that Cormorant, and I love it.
@destrywilcox6534
7 ай бұрын
Magnacut who does it best? I'm leaning towards a buck.
@davek6473
7 ай бұрын
My ~$200 edc is a Zero Tolerance 0357.
@oneblackboxed
7 ай бұрын
Hi DCA! Big fan of your channel! I have question, rather a problem for you to solve. I come from a country where knives are not imported from USA or China (or anywhere), and anything beyond 8Cr13MoV is too costly for me to purchase. Consequently, I have a 5inch drop-point knife that I frequently use when hiking. It’s made of 5Cr15, 5mm thick, Scandi convex ground, and I use it to clear my way and chop small timber for a fire. What can I do to get better edge retention out of the same blade? Convex geometry? Steeper sharpening angles, or maybe the opposite? I am quite skilled at sharpening, so give your best advice! Thank you! :)
@sloanNYC
7 ай бұрын
I have a buddy whose birthday is coming up, he camps a lot, has a couple knives, but nothing he has ever invested in. When I saw your Drop Bear CPM-20CV I thought this could be perfect, but he also is from Portugal. Do you have any knives designed by someone from there?
@geauxst5964
7 ай бұрын
Most Kershaw Kai knives
@DirtNapCity93
6 ай бұрын
What folders in general under 200 you’ve made videos on it but I was wondering if you could do an update
@ChristopherBrusa
7 ай бұрын
DCA, help me. Every good EDC folder I have had has been lost, and replaced. In the case of my Sebenza and Grayman Dua, twice each. I no longer carry my “good knives” in my pocket, only in a leather case affixed to my belt when in the woods or hunting. I’ve tried knives from your sub $100 video and have been disappointed (sorry). What can I buy for sub ~$300 with very good quality, a blade that is centered when folded, no bushings, tip up carry, and a drop point? I’m not averse to flippers but prefer a thumb stud. Thanks man.
@snowthearcticfox1
7 ай бұрын
Is there any good scandi grind folders under $100 that arent the cold steel finn wolf?
@briceconway7443
7 ай бұрын
Tops scandi folder is nice but they are about 130$
@briceconway7443
7 ай бұрын
Casstrom Lars Falt is pretty nice as well. 140$ ish
@nickiesiple5222
7 ай бұрын
Thomas is AWESOME!
@mikewilliams2771
7 ай бұрын
Isa the Protech TR3 shown here available yet? Blade looks really shiny/polished opposed to the one on the KnifeCenter website.
@knifecenter
7 ай бұрын
We'll be getting more throughout the year, but they may or may not have the high-polished compound grinds of the one in the vid. All depends on what Pro-Tech decides to produce. -DCA
@themahones
7 ай бұрын
DAC if you could sit down with someone for an hour to talk about knives that’s living and not in the USA who would it be?
@VortymLichbane
7 ай бұрын
Most serious question: what would be the best 3 tool load out for an Ewok? May the force be with you 😊
@MLKusername
7 ай бұрын
Biggest laugh ever out of me today. Nice job, Thomas.
@poppacooter
7 ай бұрын
love these guys great video.
@Mike-mi3yw
7 ай бұрын
For 200 I’d buy a Protech. There aren’t many in that price range but they exist
@oris2252
7 ай бұрын
Hi DCA, love your videos. due to local laws i am limited to carry sub 10cm (3.9 inches) non locking knife. looking for an interesting recommendation for a modern locking knife with a deep carry pocket clip and a decent steel. 100-200$ budget. thank you very much and keep up the good work.
@Andreravone
7 ай бұрын
The best ambi knife under $200 is the Sencut Serene. ✌🏾😎
@chikendrumstick
7 ай бұрын
Hey DCA, I have a coworker that swears by his Gerber Paraframe. While every knife has its place, I’ve been trying to push him towards an upgrade with no luck. What would you recommend as a higher end Paraframe alternative?
@kerryrwac
7 ай бұрын
I think that the Borka Stitch's blade is shaped like an arrow head.
@Tcrowe406
7 ай бұрын
If Sasquatch is coming to camp for dinner. What knife do you use to prep it?
@2Bstrifeless
7 ай бұрын
How about the para3 in s45vn or lightweight in spy27 for
@monkpato
7 ай бұрын
DCA, which knives world be characters from The Office or possibly Parks and Rec?
@Swearengen1980
7 ай бұрын
Fixed blade, depending on your purpose, just a tad over $200 I'm sticking with MKC magnacut. The Joker Nessmuk is laughably stupid. Why would anyone ruin a skinner with a scandi grind? Damn near useless. Get a legit Nessmuk and have one forged (Lucas Forge, for example). Plenty of guys out there who can make an authentic Nessmuk or a close variation (less hump) that are great skinners if that's what you need (and at the $200 price).
@dennispoley6005
7 ай бұрын
Great stuff! Hey DCA, Cru Wear or Magnacut ? Hearing lots of great things about Magnacut. I'm looking for best all around performance for the price. Preferably American made.
@pelayoasturias6650
7 ай бұрын
Best knife to skin and process Whitetail deer?
@burchie1224
7 ай бұрын
Hey DCA, my favorite knife is the tragically discontinued Benchmade 943 Osborne. I really love the blade shape, and I've tried to find a suitable replacement but I just can't. I tried the Tactile Maverick, but the action wasn't quite right. What would you recommend?
@Aaron-pf7eh
7 ай бұрын
Hi DCA and your larger than average hands, I’m after a bushcraft knife with the best edge retention as sharpening to me is just abit tedious. Any suggestions?
@themahones
7 ай бұрын
I would like to know what is the best knife for Joe X?
@JohnSanders-p7o
7 ай бұрын
1.75 to 2.75 in the knife world I'd equivalent to 4.75 to 6.75 in the pistol world
@ruarkmichaels3320
7 ай бұрын
DCA I’d love a recommendation for a locking, micarta with some vintage vibes. Looking at something like the Boker bonefire I love the blade profile of the civivi chevalier. anything that kind marries the two designs that I’m missing?
@RuffTurtle
7 ай бұрын
MSQ: I love buying knives and want to gift knives to people. How do I do that with out them thinking its weird?
@nickiesiple5222
7 ай бұрын
Tell them knives connect the whole Human family and we had them before we were Homo Sapiens so gift knives recognize that and are noble, not weird
@Tacticrats
7 ай бұрын
Hey DCA Im looking for the best knives for the money that are corrosion and rust resistant to put on a PFD for kayaking preferably knives with blunt tips
@Ericstraordinary
7 ай бұрын
The Spyderco Atlantic Salt might work.
@OliJuliusson
7 ай бұрын
What would be a good knife to give to someone with their initials lazered?
@steviefowler6382
7 ай бұрын
Dumb Question: 😂 Which knife or Knives would you buy if they hadn’t been discontinued/out of business? For example, the DCWO BuckLore is one of mine I wish I still had but he stopped making knives.
@rustyknifelover4463
7 ай бұрын
Hogue Ritter RSK MK1-G2 in CPM Magnacut for best ambidextrous knife under $200.
Пікірлер: 268