Drawbacks to a magnetic knife block: Kids - don’t store them that way if kids could grab them. Cats - beware of putting them where cats could rub against them or lick them. Dust/grease - if you have some knives you don’t use very often, they could get dirty sitting out exposed for a long time. Not a big deal, but it’s something you don’t need to think about when they’re covered.
@dennishayslip4605
2 жыл бұрын
Also, crabs could randomly just grab them right off the rack and run amuck in your house threatening everyone!
@chrisandjanice
2 жыл бұрын
I had the same thoughts 30 years ago . . . 2 kids and a dozen cats later it was never a problem. As for the dust and grease you are spot on, after about a year I removed the dust and grease collecting knives and put them in cardboard sleeves (cleaned first) and put them in a drawer leaving the seven most used on the magnet. As for the crabs . . . we are to far from the coast for that to be a problem.
@senoB
2 жыл бұрын
Best solution, I would think, is drawer storage with wooden or cardboard sheaths. If drawer space is at a premium then the magnetic plank may be the best option, as well fewer knives would be needed anyway.
@paddypibblet846
2 жыл бұрын
That's how my grandpapi died but it was a lobster.
@Leftyotism
Жыл бұрын
@@dennishayslip4605 lol
@peterdoyle447
2 жыл бұрын
Dog name: Blade Cause once he’s neutered you can say he’s a “fixed” Blade.
@bluwasabi7635
2 жыл бұрын
Ha HA 🤣. Brutal but hilarious
@crazeeaz
2 жыл бұрын
If the dog is female she's a spey blade
@bluwasabi7635
2 жыл бұрын
@@crazeeaz 😅😂🤣
@northernninety7
2 жыл бұрын
@@crazeeaz Let it rip!
@Jmon808
2 жыл бұрын
Eldris Light Duty is the best EDC. Highly underrated and much stronger than it looks. The scandi grind along with The handle being longer than the blade, tons of control and razor sharp. blade stays razor sharp for a long time as well
@kpfagerberg
2 жыл бұрын
How do you carry yours? I love that little blade but can’t find a comfortable way to carry it.
@hagninety4116
2 жыл бұрын
Nah. TS265 is better all the way around. Eldris is good but not best for EDC. Too round not carry friendly.
@Jmon808
2 жыл бұрын
@@kpfagerberg default is neck knife style although it’s kinda nerdy that way..it hides well doesn’t poke out . Very light weight I don’t notice it. I have thought about getting a custom Kydex sheath from eBay but still it wouldn’t be the greatest with an Ulticlip anyways lol.
@Jmon808
2 жыл бұрын
@@hagninety4116 oh nice I’m checking it out, thanks for the recommendation. I also have a Tops MSK 2.5 mini scandi for EDC it’s super awesome
@Adin100
2 жыл бұрын
I just bought one a few days ago and i agree!! I have a mora companion, bradford guardian 3, esee azula II, esee 4, and Rat 7 but l love that little mora eldris its cheap beater knife but feels so high quality and effective, its just ugly looking like all the other moras, but they are very good products.
@greekveteran2715
2 жыл бұрын
General light to medium use and/or food prep: Full Flat grind (with slightly convexed edge bevel) General Hard use: Saber Flat grind (with convexed edge bevel) Hunting / Skining knife: Full Convex grind Wood working/bushcraft: Scandi grind (with slightly convexed edge bevel) Tips Hollow grind: is the cheapest way for a factory to make a blade, because they use 2 big round stones to create the main hollow bevel, which costs way less, than grinding any other type of grind, where you need belts. Belts cost, Belts don't last as long as stone. Microbevel: is another cheap and fast way to create a sharp edge this time and it doesn't add to the edge stability, as companies claim, to hide the truth. It's still a flat bevel (V edge) which is also burnt from the fast factory belts, which means you still have to remove that burnt steel before use. Those kind of Microbevels, also provide poor cutting geometry, which means you either have to mompletely remove it, or at least, blend that with the main bevel to fix all those issues (edge stability.cutting properly and better) Geometry: of a blade (thickness and height of a blade, kind of grind etc) also heat treatment, are far more importand than type of steel is. Marketing has turned people, to look for steel as the most important, but it's the last thing you should check on a blade. If the heat treatment is really bad, no matter what steel it is, the knife will be garbage. Same goes for the Geometry of the blade, which is something a bit more complicated, than most people think it is, but it is very important to overlook and only care for the steel.
@greekveteran2715
2 жыл бұрын
@@MountainFisher Hollow grind is what cheap knives come with, because it's the cheapest way for a factory to create a bevel (search for details on that) That's where their taste comes from. Market is full of cheap knives, expenisve Hunting knives are less and less, since both the crisis hit and the China filled the market with their cheap stuff. To the point now. Full convex allows the blade to glide on bones, without the edge hiting them (That will not only saves the edge from damage and getting dull faster, but also allows the blade to work) Convex edge also, provides way more edge stability that a hunting knife needs, otherwise the edge chips or rolls easily, which is not the best thicg to happen when you're out there field dressin an animal for example. Hollow grinds perform the xact opposite than that. The hollow bevel doesn't the blade glide on bones (when cutting back straps for example,where the side of the blade touches the ribs or the spine bones) Hollow grind always come with flat "V" edge bevels, which can't provide the edge stability a convex can.Actually Hollow grind produce a very thin edge, which is prone to damage. You can also compare the performance of a Bark River Fox River, with a Buck, which come with hollow grinds. Ask a hunter to field dress a couple of Deers, and then ask him to check both knive's edges.
@evildead1791
2 жыл бұрын
Amen
@HeyItsCoates
2 жыл бұрын
I love Knife Center because they bring the knowledge, unlike other knife store youtube channels ;)
@702johnny
2 жыл бұрын
Bhq used to... Now I don't even watch them. DCA has improved so much. Like knife tv now. Awesome.
@Gabor.Bujdoso
2 жыл бұрын
@@702johnny 5-6 years ago that had the 'meet your maker' series which was great, also they did testing, knife competitions, etc. Nowadays their content became a bit dull...
@HeyItsCoates
2 жыл бұрын
@@702johnny I love Kurt and Dallas, I love their charm, but I also love DCA's knowledge and humor. I hold no bias, if it's knife content, it's all good to me.
@702johnny
2 жыл бұрын
@@Gabor.Bujdoso my point exactly.
@702johnny
2 жыл бұрын
@@HeyItsCoates I can understand that completely. Lots of good knife content out there besides blade HQ though. Nick shabazz. Cutlery lover. Advanced knife bro. Frankie and bird. Just to name a few if you didn't know. Can also follow the knife brands directly on their KZitem channel to get some inside information.
@willblake72
2 жыл бұрын
Name that dog Flipper. As for a bugout with longer handles, those new AD 20.5 knives seem like a good alternative. Bailout is a good choice, too.
@coprolite_steve
2 жыл бұрын
The 20.5 isn’t as slicey though…
@jb7707
2 жыл бұрын
Bailout is an awesome knife imo
@willblake72
2 жыл бұрын
@@jb7707 Yeah it's good. I would like it more without that glass breaker, rarely carry mine because of that. On the fence about buying a different back spacer.
@chasetoncain
2 жыл бұрын
dog names to really spice things up: CPM K390 scales secondary bevel pakka wood ritter burr martensite t8 torque screw 15 thou choil carl?? thank you for your time
@bluwasabi7635
2 жыл бұрын
t8 torque screw is a neat name. Call them t8-r for short
@just-dl
Жыл бұрын
t8 torgue screw sounds like Elon Musk's twisted sister....but, "Secondary Bevel" may be my favorite so far! :-)
@christiannasca3520
Жыл бұрын
Regarding the corrosion issue with knives or anything in dishwashers: You can get dedicated zinc blocks to permanently keep in the dishwasher. The zinc will sacrifice itself by corroding away in place of all the other items in the dishwasher. It works, and the same principal is applied to the hull of ships. They, too, will be fitted with blocks of zinc to prevent the hull from rusting in places, where there might be imperfections in the protective paint. Try it!
@bobhabsolute4995
2 жыл бұрын
For a puppy, Leak would be a good name although you will wish he will outgrow it. Freek would be another good name even if the spelling is wrong. Personally I would go for one of my favorite steel : CruWear. Of course, you are in trouble if your favorite steel is 8Cr13Mov. 😉
@masonrains5010
2 жыл бұрын
420J2 is a very good boy.
@rwstubbz
2 жыл бұрын
@@masonrains5010 not in my house. Maxamet, elmax, magnacut maybe, can't use spy27 cuz it's proprietary of course. I don't think I'd be caught dead yelling m390, 20cv or 14c28n at the park lol
@landscapingspecialist
2 жыл бұрын
I like Leek for a dog.
@mylesgalos6465
2 жыл бұрын
Bashia - vaciada - to sharpen
@timbucktoonotforyou.8442
2 жыл бұрын
Please not Freek. I've just lost my Super Freek and now I'm sad everytime I hear her name.
@mattadler4710
2 жыл бұрын
I think Medford would be a fine name for a dog. Also Esse sounds good. Kizer might be a little too aggressive.
@benoitcolignon8569
2 жыл бұрын
Kizer for a German shepard sounds appropriate...Finch can work too for a dog name...
@blowncold1
2 жыл бұрын
Knifey Dog names male: Axis, ABLE, Scratch, Spydie, Dagger female: Tighe or Ti, Moly (more edc-ish), Lucha, Cricket (aka CRKT), Mora
Very, explanatory. You cover information very well, clear detailed descriptions leaving almost no stone unturned, Thanks!😃👍🏾
@michaelhicks9563
2 жыл бұрын
David, speaking of blade grinds- What is the purpose of a chisel grind? My Snody designed Ka-bar BOSS sports one. I use it to trim the ends of my cigars off (flat side towards the body). I know that sharpening one is done only on the angled side, then stropping the flat side.
@slywolfe
2 жыл бұрын
I've always wondered this too
@nathankendall3519
2 жыл бұрын
It makes the “behind the edge thickness“ better, instead of two bevel shoulders, there is only one, so it will slice better.
@michaelhicks9563
2 жыл бұрын
@@nathankendall3519 Thanks for the good info. I remember ruining a chisel blade years ago by sharpening both sides.
@realbroggo
2 жыл бұрын
With dishwashers it's not just the knocking around and the heat. Dishwasher detergent is extremely caustic and contains abrasives - esp. the tablets. Dissolve a dishwasher tablet in water and you'll see the sand/silica abrasive material. Seriously, hand-washing your good knives takes only a couple of minutes and helps keep them in good condition. Also, while knife modding can be fun, for most it's easiest to contact Knife Center and have them help you find a knife that fits. Thanks DCA - another great vid.
@jean-baptistedemets3477
2 жыл бұрын
You did answer my question, and more ! Thank you very much !
@del4775
2 жыл бұрын
Wow, some amazingly patient answers to some incredibly dumb questions! You want to do WHAT to a Sebenza?! 😂🤣😂🤣😂
@censusgary
2 жыл бұрын
If you load the dishwasher carefully and correctly, you reduce the risk of damaging knives you put in it. Most people who use dishwashers don’t know the correct way to load them (or don’t care). That said, I still don’t recommend washing knives in a dishwasher. They are quite easy to wash by hand, anyway. If a knife has a wood handle, don’t even think about putting it in a dishwasher. If you’re ever tempted to put anything wooden in an automatic dishwasher, just throw it in the trash instead.
@juliomb1
2 жыл бұрын
Love the Terry Gilliam intro!
@-ius-6502
2 жыл бұрын
When I 1st found BenchMades, I went to buy the bugout because it looked amazing. When I got to the store I saw the bailout, asked to hold it and never gave it back. I love that Bailout!! I did end up grabbing the bugout (for my son)
Hey DCA and Seth. Which EDC Fixed Knives would you recomment for Bushcraft, Hiking and Outdoor? It should be nice to carry scout on the belt or just in the Jeanspocket. Please make a Video of EDC Fixed Knives for Bushcraft. Thanks. Take Care and keep going this way. Knifecenter with you and Seth is the best KnifeChanel in the world. For me definetly. :-) awesome.
@mdoe8
2 жыл бұрын
Alright DCA, have a challenge for you. Looking to make another unnecessary knife purchase. Here’s what I’m looking for. 1. Just below 4” blade with a decent steel. Shape not picky on, just not a cleaver. 2. Lock that my fingers aren’t in the way when closing 3. Grip that I can actually grab. It can be thin, but needs to be “taller” to still have grip 4. Clean, non-tacticool appearance 5. Deep carry pocket clip (or aftermarket available) 6. Optional, but ideal: Decent finger guard of some sort (finger grooves or flipper that helps prevent hand slipping forward) Sub $200. Would be nice to have something that’s not as common.
@jakerozier77
2 жыл бұрын
Howdy. Thomas RULES! I Love the WEEDS! QUESTION 🙋♂️ “IS A HOTDOG A SANDWICH? “
@jonathancupp3686
2 жыл бұрын
Only if you add mustard!
@robertlaborde2671
4 ай бұрын
Very clear and informative thank you !
@janeriksson6147
2 жыл бұрын
I was just about to send reguest for this video but you guys readet my mind and got it out faster....
@aPoxOnUsernames
2 жыл бұрын
Putting in a request for a whittling episode... What is the best fixed blade whittling knife - flexcut? Mora 120? Something else? What about folding whittler.... carvin' jack? What about spoon knives? How do you sharpen a v gouge, spoon knife, etc?
@millibarman
2 жыл бұрын
“Magnetosphere” Nice.
@lordirek1
2 жыл бұрын
Adamas, Contego, Deka, Barlow, Chopper, Condor, Izula, Ladybug, Bolo, Parang. That's all I can come up with off the top of my head.
@-ius-6502
2 жыл бұрын
Thank you for all these videos; great content. Thank you so much for the pictures of the grinds and explaining
@scootosan
2 жыл бұрын
Hey DCA thanks for the education as I am relatively new to the Club. Also I appreciate your style straight up and not Down to.
@landscapingspecialist
2 жыл бұрын
Most dishwasher detergents have a gritty substance added. This allows the dishes to be scoured and cleaned. However the gritty scouring action of the detergent will absolutely ruin any metal cutting edges. Listen to DCA. Wash by hand.
@johnny6171
Жыл бұрын
dca Thank you so much for your podcast! I have learned a ton!
@NinjaHikage
2 жыл бұрын
"Who's Molly?" ahhh, we really need more of Thomas! :D
@RobBernhard
2 жыл бұрын
I have the perfect dog name if the puppy has larger than average paws... 😎 Thanks for another great episode!
@nathankendall3519
2 жыл бұрын
Slightly larger than average paws!!
@anthonycampos7417
2 жыл бұрын
For that Daniel guy, Liong Mah makes a lot of his knives in left handed variations that you can buy directly from him. Namely the KUF 4.0 or 3.0 are Flatgrinds with left-handed versions
@Dustinrhoades
2 жыл бұрын
Thanks DCA!
@scootosan
2 жыл бұрын
and on a further note I bought a SOG assisted EDC (budget) that had resistance. I took it a part and ground and polished the contacting parts and the performance is so much better.
@amsg666crew
2 жыл бұрын
Love the weeds. Great channel
@Leftyotism
Жыл бұрын
23:11 Case, Honshu, Shrade, Mora, and so on. Preferably monosyllabic, or disyllabic; which is better for calling.
@Squatch-sj3vg
2 жыл бұрын
Question for DCA: when will you guys be the exclusive distributor for the axis lock rat 1? 😁
@Sherrodja
2 жыл бұрын
I have that Knife Center exclusive CJRB Feldspar. Great EDC knife.
@robertfish6779
2 жыл бұрын
Thomas yelling still cracks me up all this time later
@dorseywsg
4 ай бұрын
U have been a great help for a while! Thank you. I'm almost a Blade Master. May I offer an idea? City folk can't leave the 3 (three) inch realm of blade length, (I'm in DC). Keeping an edge is a problem for folks who use a knife. Whet Stones are fun but too time consuming...I use a few cheap SAND BELT SYSTEMS (I have diamond, aluminum and whet stones and so on), I think you would do well to investigate, use and review the advantages and problems with the Belt Drives...they are the best quick and lasting edges one can get! Please respond!
@jeffslaven
2 жыл бұрын
Hey DCA, Thomas and Seth! My EDC for the past year has been the very budget friendly SOG Terminus XR with OD green G-10 scales and D2 steel. It seems to get very little mention any more, and gets swept under the rug by the Terminus XR Lite, or the Benchmade Bugout, which are both considerably more expensive. I just want people to know that value for money, I've yet to find its equivalent. D2 rules!
@Gabor.Bujdoso
2 жыл бұрын
It's my perfect EDC knife as well! I was so impressed, that I bought the S35VN version too (not the LTE). I like the steel liners and that little extra weight isn't a problem for me.
@rwstubbz
2 жыл бұрын
Yuppers I carry mine sometimes. I got the s35vn version for 65 Bucks on sale. Great deal on that knife. I love the knife and was able to fix everything that I didn't like about it.
@lordquenntillieusiii9250
2 жыл бұрын
I think Kizer would be good for the dog name
@fredelmo
2 жыл бұрын
'Opi' for the dog. Whether it's short for opium or Opinel is up to you!
@Ericstraordinary
2 жыл бұрын
If you don't have the means to give your knife a true convex edge, you can approximate it with secondary bevels. Try re-profiling your edge down to 15 degrees and refine it with progressively finer stones. Then do the same at 17.5 degrees, and then the same at 20 degrees. Finish it off with a thorough stropping, and you have an edge with a nice stoutness behind it, almost like a convex one would have.
Idk if it was asked, but i think that blade finish (Such as blackwash, stonewash etc) is really interesting topic. Also really cool thing about one russian knife channel is that it's leader shows wich knife he is carrying at the moment. Thanks for your interesting videos
@gabespain
2 жыл бұрын
Bowie is a great name for a dog
@quaxenleaf
2 жыл бұрын
Would’ve liked you to include/discuss the Rockstead line…pricey for sure but worth a look.
@bradprater4789
7 ай бұрын
The more I watch these knife center videos, the more I realize I am not a member of their core demographic. I love knives, and carry at least one at all times. Because I use them everyday. I take care of my blades, but I refuse to baby them
@DylanLey
2 жыл бұрын
Do you have any good suggestions for a CA Legal Auto knife that has a full length handle like the SOG TAC AU Compact CA and the upcoming Benchmade Partial Auto Immunity? I live in CA and want to get a legal automatic knife that also has a "full" length handle. Most CA legal autos have small handles.
@barrydneedham
2 жыл бұрын
My big boy Akita (120 pounds of love) was named Katana.
DCA. Culinary bushcraft wordsmith( like nordsmith) sweet blades man pop o colors awesome on nordsmiths. Goodjob sir.
@dennisleighton2812
2 жыл бұрын
12:28: I'd love to know where this myth about hollow grinds being the most difficult to sharpen originated? As you rightly say, (thanks for that!) the opposite is true! If you can sharpen a flat grind or sabre grind, it's exactly the same.
@paulmills426
2 жыл бұрын
I was planning on buying a $1500 rockstead knife, the one with the etched titanium handles and the botton lock but I was really hoping I could find a coupon for even 10% off would be a big help. That would save me the tax plus a little extra. Thanks, Paul.
@dennisleighton2812
2 жыл бұрын
5:50 Hollow grind: your point about the area behind the edge being vulnerable. I have heard this levelled at hollow grind blades often before. However, in almost every case (this one included) the blade depicted has a very deep and wide hollow, going up almost to the back of the blade! But, not all hollow grinds are done this way! Many tough and durable blades are grownd much more steeply - ie the primary grind bevel is much narrower and less deep, which result almost in a grind very similar to a sabre grind. Such blades look and perform much like sabre grinds too, and can be very durable and tough. They sometimes have quite a large secondary grind at a steepish angle meaning even more steel thickness behind the edge. Such blades a far more robust than a similar sized flat grind, and better at splitting. I wonder if you would care to offer a comment, and point out any flaws in my argument. Much appreciated.
@ordinaryaverageguy3233
2 жыл бұрын
Hey Mollydookers unite!! 😂 the Shiro neon lefty is a flat grind and a fantastic framelock, you guys usually carry them. And Shiro just released a larger variant in lefty, albeit for about $1,100
@oferbechor1579
2 жыл бұрын
THANK YOU
@c_solly5892
2 жыл бұрын
I 100% agree with never putting your kitchen knives in a dishwasher. I always handwash and immediately dry my kitchen knives. Mostly because I paid a lot for them, and I want them to last. Edit: LOL at Carcass Splitter for a puppy name.
@adamjames1375
2 жыл бұрын
I'm not so worried about the rust. I just don't want my baby hanging around with spoons & forks.
@crazeeaz
2 жыл бұрын
I'm going with Barlow for the dog name
@clintashmead3558
2 жыл бұрын
As always thanks for the education DCA and side kick Thomas. Medford might be a good dog name. Boker?
@AleksandrePertaia
2 жыл бұрын
I think Jesper is a good name for the puppy, or maybe Azo
@MLKusername
2 жыл бұрын
Show some respect. Name your dog David C. Anderson.
@chrisrichardson2919
2 жыл бұрын
They make scales for the bugout that are almost an inch longer then standard. Applied weapons tech is the company that makes them
@brettt1268
2 жыл бұрын
The spyderco spidy chef will never rust
@bobbrown98
2 жыл бұрын
DCA: I trying out carrying a fix blade around my house when I am doing some regular fixing/maintenance. I have been trying the ESEE Izula for this, and it works okay - but I wouldn't mind something a little thinner & w/o coating - so it is a bit more slicey. Want it to be good for utility work and have a belly... I wear it vertically on my belt - and like the size of the Izula because it doesn't get in the way - and is long enough to get some work done...
@scottcarpenter6715
2 жыл бұрын
Which blade steel would you recommend for a convex edge? Maybe, top 3 choices?
@mylesgalos6465
2 жыл бұрын
Brk uses lots of A2
@del4775
2 жыл бұрын
I've got a few convex grind Fallknivens that use a laminate with either a VG10 or Cobalt steel core, and they are just amazing!
@jeffpeters4497
2 жыл бұрын
We had a saying while I was in the Army..."If ya can't fix it, duck it."
@brocksamson4250
2 жыл бұрын
Great Tutorial, thanks DCA. 👍
@barrybaldwin5535
2 жыл бұрын
As usual, an excellent discussion for enthusiastic newbies entering the "WEEDS" of the knife genre. Your descriptions should offer up some additional logic regarding initial choices for EDC or specific tasks.
Dog/knife names: Strider, kukri , Joe Flowers (he's a beast, is he not?)
@zpwilson85
2 жыл бұрын
Hey DCA. I am just recently entertaining the idea of a pocket fixed blade. I have not seen any fixed blades that have a clip on the handle of the knife and just a sheath to cover the blade. I think I would like a design like that. I have a couple of small fixed blades that have pocket clips on the sheath, and one MKM with the little magnet clip thing. I just would like the knife to be further in my pocket than it is with knives I have. If the pocket clip was on the handle of the knife it would sit further down in the pocket. Do you know of anything like this?Thanks. Zach W.
@DroogyT
2 жыл бұрын
Puppy names.. Rat 1, Kershaw, Tanto, Bevel, Aus 8 (for Australian shepherd)
@wes.killed.it.5511
2 жыл бұрын
Manix/Ontario/Praxis/Nitro(Nitro-V)/Arcane/Randall/Wharny(Wharncliffe) seem like some unique but not too outrageous knife names for doggos!
@jordanducharme.jd86
2 жыл бұрын
Hey DCA, first of all, big fan and I have learned a ton from you show! Thank you for all the tips and tricks. My question is, my brother is a sinistral citizen (left handed) and he's getting married, I am the best man and I'm looking for a nice knife that's fitting for a wedding present, budget under $200 and good for someone who does both camping and for edc as well, preferably a good folder or smaller fixed. No preference on brand but something kinda both camp and gentleman if that exists. A bonus if you can recommend some budget option that I can get for the groomsmen that go with his but obviously not as nice lol. Thanks for all the awesome episodes and all the best!! Take care to all and stay safe
@rwstubbz
2 жыл бұрын
A Spyderco para 2 left handed for the groom and Spyderco tenacious for the groomsmen. Actually, artisan has some good options for that as well. Titanium versions for the groom and budget for the groomsmen. there are a couple of sog series like the terminus that have similar high end and budget friendly brothers. They are xr locks so ambidextrous with 2 way tip up carry. That said, Benchmade would work as well, but they don't really have a groomsmen priced option. Not less than about 100 bucks.
@just-dl
Жыл бұрын
curious what you went with...the Fallkniven line up is classy looking enough to qualify as gentlemanly, while they're easily robust enough for serious camp work. The R2 is smaller, more subtle, but the F1 with satin finish would be my recommendation. I like fixed blades for southpaws, as they're naturally left-handed. For the groomsmen, the Civivi Elementums have a similar classy look, half the price and seem pretty rugged. if I were a groomsmen, I'd be hoping for a Condor Krakatoa, but that's just me.... :-)
@SimonSaysCanada
2 жыл бұрын
Hey DCA (shush Thomas :P) what would be you best leather sheathe / fixed blade combination for multi-week expeditions in the Wild Canadian North? Expecting wet conditions, canoe flipping over, so that sheathe must be strangling that blade tight until called upon. Curious to see your budget pick, as well as your "money is no object" pick. Bonus points for real rustic woodsman aesthetics! Thanks for all the free knowledge!
@MountainFisher
2 жыл бұрын
Shoot, grinding a convex is easy, I can do them accidently while grinding flat grinds and not pay attention. 🤣😂😅 Actually I screw a 1/8" plate to the platen two inches above my table and grind the slack area under the plate, perfect convex every time. It's hollow grinds I use a jig with.
@jeremybusk5319
2 жыл бұрын
I am looking for a protech sbr but they are always out of stock. I want a aluminum scale auto so it antiques with use, my question is do I settle for a hogue or launch which is always in stock. Another option is the protech TR-5. Thanks
@Grummash
2 жыл бұрын
Bowie would be an obvious knife-related dog name.... or if it’s a Spaniel... Flipper could suit the dog!🤜🏻🤣🤣
@AR-vf7vg
2 жыл бұрын
Most Knife "enthusiasts" don't use the knives at all. I guess the big majority of knifes produced by these top brands exist solely because they produce for collectors, never because knifes needs to be replaced because of being worn out. In our age of high tech consumerisme, I'd say 95 % of every new knife is merely a potential tool, a symbol.
@paulklein37
2 жыл бұрын
Thank you for continuing to fuel my new addiction with these great videos. I have been looking for a knife to carry while fishing for gutting/prep. Also a multi tool with needle nose thin and long enough to pull hooks, scissors, and tweezers or something for deboning. Not sure if there’s anything that combines a decent knife with any of these options, but any recommendations would be appreciated.
@geico1975
2 жыл бұрын
MAN! When talking about the Benchmade Bailout, and grinding one into a drop point blade I was thinking. OMG! No way! I'd try that on a Benchmade:) HA! Of course, I have zero experience in that type of modification, I'd most definitely buy one or two gas station specials to get some practice:) LOL!
@ohiogarbageman9507
2 жыл бұрын
Just sharpening while ignoring the point will result in a drop point after a few sharpenings.
@bill64gr
2 жыл бұрын
Bohler, Hogue, Sig, Vox
@ryanonsrc
2 жыл бұрын
I would say a big disadvantage of a magnetic knife holder is magnetizing the blade, which can be undesirable for some applications.
@nemo6686
2 жыл бұрын
Dog name: Vagabond (two names for the price of one with DCA's pronunciation!)
@jesuschristiskingandsavior461
Жыл бұрын
Love this series. Thank you DCA! How do I tell which grind is which on knives I already own though?
@PopeRocket
2 жыл бұрын
For tanto profiles. Is it just the pointed belly that makes a tanto or is it the scandi-like flat and thickness before the geometry of the two bevels?
@glennklug4438
2 жыл бұрын
Hey DCA, what is the best blade shape/grind for opening bubble mailers? Cheers to KnifeCenter's whole content team!
@d4ngerd4d
2 жыл бұрын
Hey DCA! I know you mentioned kitchen knives should ideally not go in the dishwasher. I would assume this means we should wash them by hand in the sink. But how do I scrub them when they have food stuck on? I always feel like I'm going to cut my hand or the washcloth or the sponge and it's somewhat awkward to use a scrub brush on a knife. Is there a method or tool that works well for scrubbing knives by hand without as much risk? Thanks!
@michaelhicks9563
2 жыл бұрын
A nylon dish brush works fine while keeping your hands/fingers safe.
@tobyhall1167
2 жыл бұрын
Hey DCA and Crew, Have a question about Buck's 110/112 slim and lt. Why do those models have a bump at the back of the blade and front of the lockbar? I don't see the bump on the regular models. Are they trying to distinguish the less expensive from the normal priced models??? I've ground down the bumps on my 112 slim and like the results, feels fine to my thumb but is noticeable to the eye.
@diverson63
2 жыл бұрын
Hello David, I liked your story about using Duct tape on the PVC pipe. Then you made a statement that makes me believe you will understand, "Quando Omni Flunkus Mortati".
@Mattisfaction
2 жыл бұрын
I googled it. I should have known. I am terrible.
@diverson63
2 жыл бұрын
@@Mattisfaction Red Green and the opossum lodge.
@Mattisfaction
2 жыл бұрын
@@diverson63 oh I know now! I used to watch The Red Green show all the time!
@diverson63
2 жыл бұрын
@@Mattisfaction my favorite show! Always remember, If it ain't broke, you ain't trying!
Пікірлер: 329