LOL, I was about to have a panic attack when I saw the hammering test.
@Aldrizzle
Жыл бұрын
Same lmao my cheeks clenched
@evankennette1146
Жыл бұрын
Lol why they're well made tools, I've done it, you can still take care of tools without babying them
@BrainTimeOut
Жыл бұрын
I have a knipex cobra from 2014 and i often abuse it as a hammer to open tank containers
@jasonvandervalk3679
Жыл бұрын
I just got some today. I also tenst up said to myself you better not
@autumn5592
Жыл бұрын
I've used my 180mm Pliers wrench as a hammer, it's fine. Just learn how hard you can hit with it.
@fixedit8689
Жыл бұрын
The hammer test sold me on the Cresent
@209chevymon
8 ай бұрын
😂😅🤦♂️
@dtoman6831
3 күн бұрын
That’s why we call em adjustable Hammers
@isaac_bear
Жыл бұрын
Unrealistic speed test. You didn’t move the adjustment on the crescent wrench the wrong way, every single time, before making the right adjustment, only to find out you’ve now gone too far. You also didn’t drop the crescent wrench, then forget which way you have to move the adjuster and go the wrong way again.
@DieselWrenchDoctor
5 ай бұрын
also 2 hands vs one
@stephenphillips8692
Жыл бұрын
Every tool you own is a hammer at some point!
@ParklanCustom
Жыл бұрын
True words
@Elpipiton
Жыл бұрын
Not if you're prepared. I carry a 2 inch hammer. And my putty knife is always handy, it's got a hammer thing in the bottom.
@vorsprung2330
11 ай бұрын
@@ParklanCustom lol
@dylanherne6093
5 ай бұрын
The title of Adam Savage's book is "Every Tool's a Hammer"
@dan4age
2 ай бұрын
And every screwdriver is a prybar😆
@CarpeDiem601
Жыл бұрын
THE ENDING WAS PERFECTION.
@dant8213
Жыл бұрын
I was like dude it's still brand new looking...not yet at least
@dant8213
Жыл бұрын
The hammer test us what I was referring to
@samestes8069
Жыл бұрын
Love the hammer test ...every tool should have a hammer on it
@ParklanCustom
Жыл бұрын
The ability to use any tool as a hammer is definitely a plus! Lol
@kappa8767
Жыл бұрын
Yes all mine has dents & bents for prying & hammering
@wes1051
16 күн бұрын
Check out the Wera Koloss rachet😂😂😂
@micahj89
Жыл бұрын
"anything is a 'hammer' if you swing it hard enough" - Someone, probably
@takenusername
Жыл бұрын
The Knipex required 100% more hands to use.
@keldon_champion
3 күн бұрын
On a serious note, the pliers wrench takes slightly longer to adjust but if you have to do more than 2-3 turns in a cramped space it is night and day better
@georgecurtis6463
Жыл бұрын
Each tool has its purpose if used properly.
@joey4277
Жыл бұрын
This is the best satire I've seen in a while
@fuloplehel
Жыл бұрын
I have the pliers wrench in multiple sizes and is my favorite one, but after the cobra which is the most used one. Adjustable wrench is rarely used. But I always carry a hammer. In the past I used my pliers as a hammer and after that they were sticking and the rivet was damaged. So I learned a lesson.
@ParklanCustom
Жыл бұрын
Using pliers as a hammer will definitely damage the tool. Great point.
@robertacosta1293
Жыл бұрын
Yea I hardly use my adjustable now channel locks are just more convenient. There’s times where the adjustable does a better job but the ease and speed of channel locks make it better
@owenwilson3750
Жыл бұрын
Test result: Tester as expected does not do actual work.
@ParklanCustom
Жыл бұрын
Work? What’s that?
@ianholmquist8492
Жыл бұрын
He means it would be a much better test with practical results if you do it in a real-world situation instead of drilling a bunch of holes in a 2by and setting some bolts in it.
@ParklanCustom
Жыл бұрын
@@ianholmquist8492 I set bolts into lumber all the time, how is that not real world? lol
@xcynn3rx
7 ай бұрын
What about bending metal? What one wins? putting the jaws on metal and a pipe on the other end and giving it a go
@julianweiser9985
4 күн бұрын
The knipex are perfect for brass as they dont damage it.
@sickmike0739
2 ай бұрын
I have 2 pairs of pliers wrenches (7&10in) and I love them. However, we aren’t gonna shit on the adjustable (crescent). Don’t ever forget where ya came from!
@melchizedekvanvreden7280
Жыл бұрын
This guy did a grip test on the complete opposite tools 🤣
@rydermiller1782
Жыл бұрын
well it's something they can do that the other can't.
@AandAEquipmentService1276
Жыл бұрын
Might loose clamp test but they make Vice grip locking Creasant wrenches
@MLGxBXRxPRO
3 ай бұрын
Ahhhh the old "whats closet to me at this moment is a hammer"
@ralphpeepoo6786
Жыл бұрын
I'm sorry, were you using 2 hands with the pliers lmao
@ParklanCustom
Жыл бұрын
Yep, I believe I was, what’s your point?
@nodabot
5 ай бұрын
Nearly panicked right there at the end lol
@KaiserVonKrieg
Жыл бұрын
Lmao exactly. Cheap tools make great demolition tools. Don’t wanna hammer with quality of
@LargeFatherKain
Жыл бұрын
Slightly misleading imo, Crescent brand adjustable wrenches are not the best, compared to a set of pliers from a pretty top tier brand doesn't exactly feel apples to apples to me.
@ParklanCustom
Жыл бұрын
its not comparing the brands, its comparing the type of tool.
@LargeFatherKain
Жыл бұрын
@@ParklanCustom I know, my point is that a higher end adjustable may perform better than a lower end one.
@JP-kp9bg
Жыл бұрын
@@LargeFatherKain there’s nothing wrong with crescent’s adjustable wrenches, they work just as well as any other.
@porkchop7652
Жыл бұрын
Love my pliers wrench, but have to admit I tried for ages to not use it as a hammer but last week I had no tools on the plot I was working close to hand apart from the knipex, I was lazy and it got used 🤣🤣
@ParklanCustom
Жыл бұрын
I’ll use them only for a small tap
@porkchop7652
Жыл бұрын
@@ParklanCustom yeah it wasn't a big bang but it felt wrong 🤣 great tools cool vid.
@ex8280
11 ай бұрын
Is it true, you have to use two hands to operate the knipex?
@sambothebold
5 ай бұрын
The ending was the best. I was “yes” do it
@SouthCaliPlumber
6 ай бұрын
I said “Ah he’ll no “ on your hammer test
@jampacc
Жыл бұрын
Best hammers are the battery end of my Dewalt impact and my klein linesman. I know I know but idc. Its just so convenient lol.
@HAJARIlalNishad-hl9es
27 күн бұрын
Thanks
@chrisanastasia6672
Жыл бұрын
In what application are you using these tools to put bolts/ screws / lags into or taking out of wood personally i use a impact
@ParklanCustom
Жыл бұрын
there are several applications that call for using a hand tool to tighten bolt connection through wood. Impact drivers aren't always the best choice as they can over tighten and damage the wood depending on the application. Rough framing impact drivers works fine.
@milwaukee_69
3 ай бұрын
The crescent wrench was here 1st but both will do the same tighten nuts and bolts. The crescent for me more cause I don't own a pliers wrench.
@posmaster22
Жыл бұрын
you need both
@Bloodbain88
Жыл бұрын
Yeah but the pliers wrench is here in my hand, and my hammer is in the toolbox way over there....
@ParklanCustom
Жыл бұрын
Have at it and let us know how it worked. 😂
@autumn5592
Жыл бұрын
@@ParklanCustomIt works alright as a hammer. Just have it set to a larger jaw size so you don't fuck it up. It won't do much, but for a little persuasion it'll be fine.
@2121contreras
Жыл бұрын
When will you be reviewing nws pliers wrench????
@ParklanCustom
Жыл бұрын
I have some NWS products that I am currently using, I like to use the tool before I review it. So NWS tools will be coming soon! 🤝😁
@clifford_2zero7
Жыл бұрын
Everybody in the know knows the best hammer is the bottom of a battery attached to a drill (or any LI power tool)😏
@ParklanCustom
Жыл бұрын
I hate doing that, but i have to admit, Ive had to.
@clifford_2zero7
Жыл бұрын
@@ParklanCustom 😬😬😬 It happens!! 🤣
@johnalenwork53
Жыл бұрын
I'm glad you can afford those hooray for you
@ParklanCustom
Жыл бұрын
Its hurts but I buy em
@samuelw.3992
7 ай бұрын
Idk. I don’t use my pliers wrench. It’s kinda annoying tbh. I’ll stick to a crescent wrench.
@paulandrew3407
Жыл бұрын
just bought the dewalt fencing plier,just to replace the hammering functions of my 400 mm knipex cobra🤣
@ParklanCustom
Жыл бұрын
Good choice!
@creeplife2802
5 ай бұрын
Why didn't you hammer!?
@KevinMLloyd
Жыл бұрын
Gave me anxiety when he said hammer test😅
@LuisLopez-lo9ti
Жыл бұрын
Good video ❤
@ParklanCustom
Жыл бұрын
Thanks 😁
@thrashlatem
Жыл бұрын
I have a hard time making the leap and buying them...that being said when I do they will still definitely be used as a hammer 😂
@ParklanCustom
Жыл бұрын
🤷♂️😂
@lucky78862
4 күн бұрын
Don't think knipex will be sending u anything... Cresent on the other hand, maybe
@johnjingleheimersmith9259
Жыл бұрын
You shoulda done the KNIPEX 98 07 250! haha
@dogwalker666
Жыл бұрын
Now try a Bacho Adjustable against those pipe grips.
@porkchop7652
Жыл бұрын
Big bacho fan but since I got the knipex they never get used anymore.
@carlstanton2550
Жыл бұрын
😂 I use mine as a hammer when I get frustrated with shit
@rawkenass
8 ай бұрын
In this case 1 hand is better than 2!
@Anthony-wj6xb
Жыл бұрын
Someone still smart enough to know why he owns a hammer or 6.
@meebbitch1117
2 ай бұрын
Haha I knew he was not using the knipex as a hammer hurts to much 🤦♂️🤣
@rustyshaklferd1897
5 ай бұрын
Knipex is it. Yeah bang with your hammer 😂
@arturodurantrejo1260
9 күн бұрын
All hand tools are hammers lol
@jamiebrisbin6966
Жыл бұрын
Really bolts in wood
@ParklanCustom
Жыл бұрын
why not bolts in wood?
@jeffwolf8018
4 ай бұрын
Crescent wrench don't hold up to pliers wrench. I'll never probably buy another crescent wrench again now that I have almost all sizes Cobras and pliers wrenches.
@leventerkose1456
Жыл бұрын
Üç cıvata için acelen ne birader? "Yavaş yap, sağlam yap."
@justinjones3499
Жыл бұрын
This is so stupid anyone in a real maintenance field and actually knows what their doing is either gona use a nut driver, socket etc to tighten it loosen fasteners in this fashion and i say maintenance because maintenance is a broad field ranging from a plumber electrical to industrial maintenance. If I got caught struggling or wasting time like this my department lead would probably question my IQ.
@kevinpaterson5697
Жыл бұрын
Hens legs vs shifter!!!
@WildBill1984
4 ай бұрын
Use those tools on bolts that are fastened into steel that are tightly secured. You were cheating with the knipex and not adjusting it to get maximum grip and torque. I bought one of these at work because of the hype. It takes more time to get optimal grip and torque i usually end up readjusting twice to get it on the right setting.
@davidaix5771
Жыл бұрын
About the same and it's not always good to go fast
@mattsabeast5
Жыл бұрын
Not to mention he missed the adjustment with the new soy boy tool.
@amneziaxeaster-gaming382
Жыл бұрын
If you can't use it as a hammer for light duty on wood don't buy does plier
@johnaranjo2059
Жыл бұрын
Your using the crescent wrench backwards. Just saying
@ParklanCustom
Жыл бұрын
I dont believe I am, not sure what your talking about...
@aydinali5381
Жыл бұрын
Dont use as hammer👍🏽
@zflyz7136
6 ай бұрын
I hate the crescent wrench so much
@americafirst6016
Жыл бұрын
Knipex is the best shit out there. Every chance I get I buy a knipex tool when I’m getting parts
@foxisthebest
Жыл бұрын
Crescent wins every time
@ViewtifulJosh388
Жыл бұрын
No good for zombie apocalypse...
@beasyphone
Жыл бұрын
Everything becomes a hammer eventually. It's just a tool.. Now I get it! It's shiny and new, but wait a month...you ain't special lol
@ParklanCustom
Жыл бұрын
Truth!
@robsondelima2606
Жыл бұрын
10 dolar wrentch against 70 dolar plier...
@ParklanCustom
Жыл бұрын
Exactly!
@asrulamru7255
6 ай бұрын
Hammer 🔨 test: stupid test😅😅😅
@jakeguenther5457
Жыл бұрын
If ya can't use it as a hammer then they aren't worth using.. lmfao...
@ParklanCustom
Жыл бұрын
😂😂
@jakeguenther5457
Жыл бұрын
@@ParklanCustom I have a pair of them knipex pliers, and they've went for a skid down the hyw at 70 mph and still work fine
@ParklanCustom
Жыл бұрын
Sounds like all it did was build character 😂
@jakeguenther5457
Жыл бұрын
@@ParklanCustom custom finger grooves 🤣🤣
@rich7331
Жыл бұрын
they are worth it even with the hammer downgrade
@youcanthandlethetruth6976
7 ай бұрын
Lol
@richardrounce7138
Жыл бұрын
Never buy the cresent adjustable. They're garbage. Buy an olsa tools 8 inch for $15 bucks. They have next to no jaw wobble, and they hold their size.
@ParklanCustom
Жыл бұрын
I like the crescent brand adjustable wrenches!
@richardrounce7138
Жыл бұрын
@Parklan Custom Try the olsa adjustable. I use it everyday, best quality.
@angelacruz71
Жыл бұрын
if youre using a pliers wrench as a hammer, you dont have enough tools. lol id rather use a rock
@ParklanCustom
Жыл бұрын
I can agree with that! 😂
@angelacruz71
Жыл бұрын
lol i was like Wwwhat! noooooo.... then tg whew! geez scare a girl :p
@ParklanCustom
Жыл бұрын
@@angelacruz71 I dont make enough from KZitem to be able to beat the hell out of my $60 PliersWrench 😂
@autumn5592
Жыл бұрын
It's fine, done it a few time, if you are afraid to give your tools a little tap, you aren't using them, lmfao
@mrtahoe
Жыл бұрын
but man you really need a tighten this up man your wrench wrenching abilities is not wrenchy enough everyone that's a wrencher that knows anything about wrenching nose this
@ParklanCustom
Жыл бұрын
This sounds like a riddle. 😂
@thebackwoodsmechanic5029
Жыл бұрын
Crescent still has its purpose
@autumn5592
Жыл бұрын
Yeah. But most things (and more) can be done with pliers wrench.
@danipool5250
Жыл бұрын
Adjustable Wrench! Crescent a Brand. 😑
@ParklanCustom
Жыл бұрын
So is channellock, but that doesnt stop people from calling tongue and groove pliers "channellocks"
@aleksantini1938
Жыл бұрын
It’s not a measuring tool lol smack the duck outta it
@sdriza
Жыл бұрын
Neither
@licensetochill79
Жыл бұрын
I got a better one it's called an impact gun
@addisonherbert6686
Жыл бұрын
Neither tool should ever be used for bolts outside of emergencies. Save yourself a headache and use the right tool for the job. Ffa
@Wavelandexterior
Жыл бұрын
Okay so we just not gonna use a proper tool at all?
Пікірлер: 150