Higher cutting capacity and less effort than a high leverage diagonal cutter of the same length; possibility to reapply the cutters to cut thicker wire, also suitable for thin wire.
I'd buy a spring-loaded version of this. I can't understand why, except for small sizes, spring-loaded pliers have disappeared from the market.
@FoodOnCrack
9 жыл бұрын
I have it and i love it. I mainly use it for 6mm² copper wire. Cuts through it like butter, no more strain in my hands when you compare it to a normal plier.
@bitTorrenter
4 жыл бұрын
Why not just skip to using cable croppers? As you can also cut 10mm² and 16mm².
@glengarry466
10 жыл бұрын
I have a pair and the only thing I would change is that the head is a bit to thick so its hard to get into smaller spaces. also would be nice to open it up wider
@ArkamasRoss
Жыл бұрын
I would be interested to see this pivot design applied to the StepCut cable shears.
@VicariousReality7
9 жыл бұрын
I was suspicious of this design when i saw them in the store, maybe i should get them
@andreaspeklivanas3937
11 жыл бұрын
Great Tools
@FoodOnCrack
9 жыл бұрын
Will there be a VDE version of this with the spring? Also, is this plier more powerful than the x cut?
@KNIPEXofficial
9 жыл бұрын
Actually we are not planning to have a TwinForce version in VDE. We have a wide range of insulated diagonal cutters and other insulated tools especially for the electrician. (plie.rs/insulated-tools) The X-Cut is generalist in the diagonal cutters range. It is powerful and handy, has a wide opening of the jaws and cuts effortless finest wires and hardest spring steel up to 2.2mm. Its narrow head design allows access to confined area like wall outlet sockets. The TwinForce has the higher leverage ratio, so it cuts again much easier than the X-Cut. The TwinForce is the diagonal cutter with the superior cutting power thanks to its innovative and patented double joint. It allows to cut even hardest material, incl. spring wire up to 3.0mm.
@FoodOnCrack
9 жыл бұрын
KNIPEX Ordered the twinforce with opening spring. Is there going to be a compact cable shear with opening spring planned which is VDE tested and has the twinforce principle?
@KNIPEXofficial
9 жыл бұрын
FoodOnCrack Dear FoodOnCrack, an insulated and VDE tested compact cable shear with opening spring with the TwinForce principle is not planned at the moment. Best regards from Germany, KNIPEX-Werk C. Gustav Putsch KG
@JerryLee..
Жыл бұрын
With increased force comes greater cutting edge durability requirement. How dies the edge hold up?
@tanktopper
4 жыл бұрын
Hope Knipex will make 200mm(8”) twinforce too.
@marcosandreydesousa
3 жыл бұрын
The extreme leverage of this pliers is so high that if you make a 200 mm model, the jaw material has to be even better. I think that there is still no construction of cutting edge material, which can support the 200 mm leverage;
@mamertofernandez8709
8 жыл бұрын
I bought the TwinForce, and the cutting ability is very good, only after a few cuts, the edges were marked, I have a Bahco that has more use and the edge is perfect, honestly, I was disappointed in the quality, expected more steel German
@KNIPEXofficial
8 жыл бұрын
Buen día Martin, gracias por su preferencia. Nos gustaría ponernos en contacto con usted para revisar su caso. Le agradecemos nos envíe su cuenta de correo o escribir a S.Koestermenke@Knipex.de? Saludos desde Wuppertal
@jimbo7042
7 жыл бұрын
I have a pair of diagnle cutter and linesman, they become dull quick but the channel locks are the best I ever used
@nolanriegsecker7131
6 жыл бұрын
Do they cut any better than gearwrench
@urjnlegend
5 жыл бұрын
Do these come in 1000v insulated version?
@KNIPEXofficial
5 жыл бұрын
Hi urjnlegend, at this time an insulated version is not planned. Best regards from the KNIPEX Social Media Team
@urjnlegend
5 жыл бұрын
@@KNIPEXofficial thank you mates, appreciate the response! I would have definitely bought this version in insulated due to the wire crimper!
@urjnlegend
5 жыл бұрын
Oh wait, I thought this was the video for the linesman pliers for a sec!
@rogelioantonio9179
9 жыл бұрын
good good
@YoussefYoussef-tw7qq
5 жыл бұрын
it was a nail or piece of almaminum
@andrebaiano1541
6 жыл бұрын
Não tem loja que acho esse alicate
@KNIPEXofficial
6 жыл бұрын
Muchas gracias por su interés. Para recibir información sobre donde conseguir nuestras herramientas en su región le solicitamos nos envíe un correo electrónico a d.duebbel@knipex.de. Saludos!
@user-zi3nf3tm5u
Ай бұрын
Tiene poca apertura de boca y una ayuda del 30% ..el Stanley es superior habré más la boca y una ayuda del 41% y encima cuesta una tercera parte
Пікірлер: 29