Two of my favorite tools. I carry both in a small tool kit in my edc backpack. They both have there place and uses. Great video 👍
@Keith_the_knife_freak
2 жыл бұрын
Thanks definitely a great tool
@toddcarr.
2 жыл бұрын
Definately a hard choice to make, again right tool for the job. The knippix is better for fasteners but the vise grips are more versatile especially when you are trying to hold stuff together. Keep making sharp things fun and enjoyable
@Keith_the_knife_freak
2 жыл бұрын
Yes agree
@jn651
2 жыл бұрын
Cool. Good vid; good to talk tools. One thing I would add is that the locking arm in the vise-grips can come loose if they open too wide (more likely with cheaper ones, I'd bet). I have two or three sizes of Milwaukee pliers in that same Knipex style and they're pretty good. Sure like the 'third hand' function of the 'grips, though. At the end of the day, it's the same reason I carry several knives; the tool for the job. Thanks, Keith!
@Keith_the_knife_freak
2 жыл бұрын
Thanks..
@DirkWerning
9 ай бұрын
You make some great points thanks.
@Keith_the_knife_freak
9 ай бұрын
Thanks for watching!
@jeffs2119
Ай бұрын
Thanks! I never noticed the wire cutters on vice grips.
@Keith_the_knife_freak
Ай бұрын
Yup they are there 👍👍
@ObamaoZedong
5 ай бұрын
I love that vice grips can also hold a saw blade if you dremel out a little notch. No need to carry a leatherman just for its dinky 3" saw when you can pack 6" reciprocating wood, drywall, or metal blades that are the same length as the vise grips.
@Keith_the_knife_freak
5 ай бұрын
Great idea
@corycg9624
2 жыл бұрын
Me personally I still would prefer vise grips over any Knipex pliers because they don’t lock and if you have a bolt that’s rusted on really tight it’s going to be a lot harder to remove a stuck bolt with just regular pliers and that’s what they are just channel locks I’ve tried using regular channel locks on rusted stuck bolts before and it was a nightmare and there are vise grips made that are specifically designed for removing bolts vise grips are so much more handy.
@Keith_the_knife_freak
2 жыл бұрын
Fair argument 👏
@JC_1095
Жыл бұрын
Knipex cobras work great at turning rusted or marred nuts and bolts. In fact I carry the 4 inch cobras with me everyday and they come in handy all the time. Just today I had to turn some stuck screws with a rounded head and they stripped so easily with a screwdriver. I used my cobras and they gripped so tight and perfectly that even with the short 4 inch lever handles it was a breeze. I do carry the leatherman crunch because it has a locking vise grip just in case, but most of the time it's not necessary or preferable.
@AlbertSingson-if2hi
4 ай бұрын
for a stripped nut or bolt? i would go for vise grip, if you max out the pressure before locking a curved jaw vise grip , it would grip more than you can squeeze using pliers
@Keith_the_knife_freak
4 ай бұрын
Very true 👍👍
@diverson63
2 жыл бұрын
I've seen alot of videos that have talked about the Knipex channel pliers. I'm thinking about getting a pair.
@Keith_the_knife_freak
2 жыл бұрын
They are pretty damn good.
@Northanteus
Жыл бұрын
How about using the vise grips to clamp down on the handles of the Knipex? 😁
@Keith_the_knife_freak
Жыл бұрын
You monster 💀
@corygriffiths4394
2 жыл бұрын
I would carry both because different jobs require different tools
@Keith_the_knife_freak
2 жыл бұрын
Good point 👍
@jasonbrown6686
2 жыл бұрын
I have been thinking about grabbing a pair of knipex . Which model is that ?? I have looked at a few sizes and couldn’t decide from the pic which would be right for me . The ones you have look like what I’m looking for !! Thanks for the video !! Take care Keifer
@Keith_the_knife_freak
2 жыл бұрын
This is the 5" pair. Very capable for their size.. easily goes in back pocket !!
@esanford
7 ай бұрын
I think having both is prudent….
@Keith_the_knife_freak
7 ай бұрын
Good call. 👍👍👍👍
@andycrask3531
3 ай бұрын
You pronounced Knipex correctly thank you. I will let you off the Zebra pronunciation 😂
@Keith_the_knife_freak
Ай бұрын
Thanks. Whew.
@rodneypearson6986
2 жыл бұрын
Knipex are great and worth the money
@Keith_the_knife_freak
2 жыл бұрын
Absolutely 👍🏼 💯
@MyKnifeJourney
7 ай бұрын
I just bought a Mafco pair
@Keith_the_knife_freak
7 ай бұрын
Not sure what that is. But I'll look it up.
@rajeevprabhu6722
7 ай бұрын
...just being bias towards the Knipix. By the way we have number of stronger cobra - plumber - pliers made India....check them too!
@Keith_the_knife_freak
Ай бұрын
Will do
@drcoffee5588
6 ай бұрын
Dont buy knipex locking pliers (their vice grips). They suck. First use, my pair stripped the teeth off. Such a waste of money.
Пікірлер: 38