For edc I use the cobra XS, small, light and extremely strong (if you want to make them narrower to fit in a pouch slot, open them to second or third tooth, clasp the handles together, they will sit much narrower) you can even carry them in your jeans watch pocket comfortably, even when cycling. My edc is for “in a pinch”, “get it done” moments, therefore I’m not to worried about marring the surface of a fastener, fasteners are generally easy to replace at a later date. If it’s in really tight, even the pliers wrench is going to mar the surface. The fact that the cobra’s lock on top a fastener means you can apply all force to the “trailing” handle, rather than having to grip the handles together and apply turning force.
@Glocktologist
6 күн бұрын
I went to the local hardware store to buy the XS but holding the 100 mm and 125 mm versions side by side instantly turned me toward the larger model. People have varying needs for edc tool sizes. The 125 mm / 5” model has been small enough for me to carry every day and barely notice it.
@simonh6371
11 ай бұрын
The XS are amazingly capable for their size and small enough for people like me who don't want to carry anything too big, I think people who say they are tiny forget that many in the EDC community carry tiny keychain sized multitools like the Squirt, Dime etc with a folder, and for us these are a viable option and way more capable. I was surprised when comparing them to a full size 8inch pair of water pump pliers I own - not Knipex but a good old solid made in West Germany pair. The Cobra XS jaws open to 25mm / 1 inch, the 8 inch OG jaws open to 30mm / 1.2 inches, so not a huge difference. As to the lack of leverage due to short handles, I think people don't realise that once the jaws are locked on to a nut for example, you only need to push on the upper i.e. longer handle so you can apply force to the end of it and get a fair amount of leverage.
@BassMaster.454
8 ай бұрын
I was really torn between the two, but I got the 125s because of the wider jaws and overall better strength. It also fits a water hose, where the 100s don't. I might end up with both one day
@rodnyg7952
5 ай бұрын
mini pliers ---world of excitement here
@b_shady_22
Жыл бұрын
Jamie sent me ! Thanks again u guys for all u do. 🤙🏼🛠✌🏼
@speechlessdeleted7190
9 ай бұрын
hope to have obe 125... great for edc.. too expensive in my country Philippines
@mikereese15
Жыл бұрын
Hey JSPR! bladesandedc sent me! These pliers look great
@jeroenvanderveen3190
Жыл бұрын
That's a nice gift. Does the leatherman ratchet hack You showed in an older video, also work with the Cobra xs?
@jspr_edc
Жыл бұрын
Kinda, but not as well as on the 5" version. The 5" has teeth going down both sides of the slide hole... where the xs has teeth going down one side only.
@just_nate_8694
Жыл бұрын
bladesandedc sent me.... didn't know you had a channel brother! I'll start watching your content.
@peddypeoples941
Жыл бұрын
knipex and swisstool, you know whats up:)
@ericyoast
Жыл бұрын
Looking to get some Knipex.
@experienceprecision5406
Жыл бұрын
The 4" Pliers wrench is the cats nips
@festol1
9 ай бұрын
The 4" is thin in the mouth. The 5" seems more robust. Does it counts?
@jspr_edc
9 ай бұрын
I think yes
@dwayneletterman3987
Жыл бұрын
BladesAndEDC sent me ! Howdy JSPR
@CorvetteTrev
10 ай бұрын
I'm genuinely curious, I have the 7" , 10" all kinds of tools... where are people actually using the 5" knipex pliars wrench? (*I have full wrench and socket sets) I'm just at a loss at where these 5" come into actual use. Besides having a tool addiction. 😂 Thanks!
@jspr_edc
10 ай бұрын
You just gotta get one to use...
@CorvetteTrev
10 ай бұрын
@@jspr_edc I do. Can't see a place to use it
@jspr_edc
10 ай бұрын
Then dont. If its not for you, thats fine.
@CorvetteTrev
10 ай бұрын
Ok, I was just asking where, precisely does this get use?
@jspr_edc
10 ай бұрын
@@CorvetteTrev its kinda hard to describe. But i've used mine on the car alot, maintenance of appliances, household repairs, & general tinkering
@lelandphill4408
Жыл бұрын
Bladesandedc sent me . (I love my knipex pliers .)
@DavidJTooley
Жыл бұрын
I needed get my hands on a Knipex because BladesandEDC sent me.
@ericyoast
Жыл бұрын
Bladesandedc sent me. still like the knipex
@jspr_edc
Жыл бұрын
bladesandedc sent me
@seanthomas8864
Жыл бұрын
Bladesandedc edc sent me.
@gracjannargiel
Жыл бұрын
BladesAndEDC takeover
@jacc6892
Жыл бұрын
BladesandEdc sent me
@TheMaroney
Жыл бұрын
Bladesandedc sent me
@fishiemon64
Жыл бұрын
Bladesandecd sent me
@Pzykoh_Tey
Жыл бұрын
bladesandedc sent me👋
@coryulrich6489
Жыл бұрын
First comment
@Knifedope
Жыл бұрын
Bladesandedc sent me 🖕🏽
@tooxtalivai0690
11 ай бұрын
So ones a tool and the other a desk toy that’s what your saying right.
Пікірлер: 49