In today's episode "KNX Remote ETS Programming by 1Home".
This tutorial is about Remote ETS Programming (How to connect to a KNX Installation Remotely)
The default IP Port of the KNX IP Port Interface is the 3671.
In order to access this port remotely from outside World you will need port forwarding.
But port forwarding in KNX is a big security risk. It is like to give in a stranger the keys for your house.
That's why you should always avoid port forwarding.
So the best solution for remote access in KNX is VPN (Virtual Private Network).
You can setup a VPN connection using a Router that supports VPN,
or using a KNX device with empedded VPN Server,
or using 1Home Remote Access.
In order to start using Remote Access Service you will need a 1Home Device, like 1Home Bridge.
1Home Official Web Page : www.1home.io/k...
1Home Bridge KZitem Review : • 1Home KNX Bridge - Rea...
Please have in mind that in order to work on a KNX project you need to be certified.
You can find Certified KNX Training Centres in the link below.
www.knx.org/kn...
Poseidwn Tech on Social Media:
www.poseidwn.tech
/ poseidwn_tech
/ poseidwn.tech
/ poseidwn.tech
/ poseidwntech
KNX Tutorials Playlist : • KNX Tutorials
KNX Web Page : www.knx.org/kn...
ETS Software : www.knx.org/kn...
KNX Training : my.knx.org/
KNX Basic Course Documentation : amzn.to/2pASDCM
KNX Advanced Course Documentation : amzn.to/2I1mw68
Негізгі бет KNX Remote ETS Programming by 1Home
No video
Пікірлер: 7