Hey Azriel, I've been a hardcore Rodinal user until I switched to Kodak XTol this is where I noticed the difference. But since Xtol is a powder and its shelf life is not so long I now use HC110 which looks kinda same to me but lives much longer on the shelf. Of course I do have a bottle of Rodinal just in case. Thanks for the vid!
@AzrielKnight
7 жыл бұрын
I should try Xtol but when I did this experiment I did avoid powder devs for the same reason!
@markivkovic7235
5 жыл бұрын
Okay so I'm late at this party but having been a photographer for a long number of years I'm pretty sure these comparisons you're doing are the first I've really seen done "properly" and extensively (the agitation speed / duration one's are top notch). Finally someone is answering those questions that forums oh so love to fiercely debate (often wrongly). Good on you sir, spending your own time and money to discover this stuff out for yourself but then also letting us all in on the results.
@AzrielKnight
5 жыл бұрын
Thanks Mark, glad you got something out of it :)
@BillPutnamPhoto
4 жыл бұрын
Been watching these as I'm getting back into developing film. You've inspired me to think about film development tests and put them down on a spreadsheet. Different films, different developers, different dilutions. It's gonna be crazy. So thanks!
@tomtimor9789
3 жыл бұрын
Do not go crazy. Stick with one developing method until you master it. This comparation presented here only shows, that every darkroom is a separate "kitchen". In opinion of many the look of negative from HC110 and DD-X is very different, not similar. I prefer smooth tones given by HC110.
@shamikchoudhury5924
4 жыл бұрын
I like Blazinal most out of three. Great look. Handled the contrast well.
@narrowstacks
7 жыл бұрын
I would love to see a video comparing different dilutions of developers like Rodinal and HC-110. I'm a fan of dilution H for HC-110, but it would be great to see what kind of difference is actually being made between something like dilution B versus H.
@AzrielKnight
7 жыл бұрын
I really love that idea Aaron and it's on my shortlist. I'd considered it before and after seeing how flat my negative looked compared to rodinal I want to see if I can get more contrast from my hc-110.
@jacovanlith5082
2 жыл бұрын
Well, what about a DIY ?
@martiningram8799
3 жыл бұрын
Hey, this was really great thanks! Very interesting comparison and loved the humour.
@marcossantana1164
6 жыл бұрын
Subscribing. Great work with the comparison. not sure why it took so long for youtube to add you to my recommended list! Great content!
@AzrielKnight
6 жыл бұрын
Thank you Marcos, I don't know why either but I'm glad it did :P I've made a lot of vids, let me know if you're looking for something and I can recommend it ;)
@radioaktiv2531
Жыл бұрын
As a rodinal user, I am extremely intrigued at the differences in performance between these developers. DD-X is just wow imo. It's a shame it's really expensive where I live compared to rodinal.
@AzrielKnight
Жыл бұрын
DD-X is expensive everywhere ;) Thanks for the comment :)
@dkmartinez7864
5 жыл бұрын
I've been using DDX for years and love it. I would suggest one thing though, I store ALL of my developers (DDX, Rodinal, Tetenal C41 and E6) in booze flasks, HDPE, chemical safe... you can squeeze out all the air and cap it off. I've done this for over 5 years and have DDX that lasts over 2 years this way. I know many used soda bottles and such but these pack up nicely and work very well.
@AzrielKnight
5 жыл бұрын
Can you link me to the type of booze flask you mean?
@dkmartinez7864
5 жыл бұрын
@@AzrielKnight Any of these types will work.... www.amazon.com/CRUISE-RUNNERS-Alcohol-Runner-Smuggle/dp/B016XAVZNQ/ref=sxin_2_ac_d_pm?keywords=booze+cruise+flask&pd_rd_i=B016XAVZNQ&pd_rd_r=e6fd88dd-6796-4c0a-97da-1373b8dffc3a&pd_rd_w=oG0ez&pd_rd_wg=UAuGL&pf_rd_p=be5d8dec-444e-4770-91df-1e16a8c46da8&pf_rd_r=G9BEXS5W18BSEEPSB05Z&qid=1562081414&s=gateway
@randallstewart175
4 жыл бұрын
He underdeveloped the DDX negatives, which came out thin. Should have used Ilford's recommendation for time instead the the Massive Development chart (MDC). Here's the problem with the MDC. It's publisher accepts data from just about anyone. It does not verify the accuracy of such input. (if you dig deep enough, they says so in the fine print., but how many KZitemrs are big readers.) The MDC has many such errors. So, if Film or Developer makers provides time/temp data, use it. If you have no other data resource, use the MDC, but do a test roll first which is disposable. The MDC is often referred to and recommended n YT and elsewhere, but that is often based on the convenience of access through a smartphone app and a program which imports the data and acts as a timer. In other words, it provides playtime with your phone. If that's your highest criterion for development data, have at it.
@zguy95135
7 жыл бұрын
this was an awesome comparison, thanks for doing this video! I started shooting on DDX only and recently added Rodinal to the mix. DDX pushes amazingly well, it's fine grain and because it's a fast developer it bumps up the base ISO, so Tri-X 400 developed at "400" is more like 640, so pushing to 1600 and more is a breeze. I am amazed at how good my HP5 shots at 3200iso look. Rodinal I have found, like you, is much punchier. If I'm shooting at box speed I'll generally use rodinal but for some contrasty films like Fomapan I dont think I'll use it again. It's too much contrast and the highlights block up very easily.
@AzrielKnight
7 жыл бұрын
Thanks very much :) I'll be using that DDX whenever possible before it goes off, maybe it'll grow on me some more.
@JohnMDiLiberto
7 жыл бұрын
LOL at the Thug Life bit :) (I also liked the slow-mo shots.)
@AzrielKnight
7 жыл бұрын
heh, thanks :)
@NickExposed
7 жыл бұрын
Another wonderful experiment! I use ilfosol 3 and have some hc110 on its way to me. Im curious to see the difference between the two. Ill have to see if I can get my hands on some Rodinal as well to give it a shot. Thanks again for sharing dude! Im really diggin these experiments and vids! You remind me so much of my cousin Chris. Ironically he moved to Canada a few years back.
@AzrielKnight
7 жыл бұрын
Nick Exposed Thanks Nick! Glad you got something out of this! I am most imprrssed by Rodinal and want to experiment with it more :)
@user-ss6zt2mo1l
6 жыл бұрын
Use an aluminum beer can to lower or raise temps. the transfer of hot and cold is quick !
@blacktownstudio5145
4 жыл бұрын
Good idea!
@usernamefr
5 жыл бұрын
I love when you throw your developping tanks and stuffs.
@hectoracevedo4545
3 жыл бұрын
Reckless. Do you toss your cameras hat way too? And people give this guy money?
@thevidyou
Жыл бұрын
I likes this video. I've been using 1:50 with Rodinal. I might need to do a test with different ratios. Thanks!
@AzrielKnight
Жыл бұрын
Good luck!
@user-ss6zt2mo1l
6 жыл бұрын
great video. I use Rodinal Stand Dev for anything under 100. Any 400 film I use XTOL, an love a1+1 look. I have used HC-110 but the syrup is a PITA. I have a huge bottle of it sitting on the shelf. It's like trying to mix pancake syrup. I have never used most ilford stuff but I am currently switching to their film. I do like Tri-x but the darks are too dense for me. HP5+ is some amazing film and you can push almost as well as Tri-x to like 12,800 and beyond.
@TimothymakeupsDitzler
6 жыл бұрын
Dude how have I gone this long without running into your channel??! Great content! I also make film related KZitem vids!
@AzrielKnight
6 жыл бұрын
Oh hey, I just subbed to you a little while ago. I like your stuff!
@jacopotassinari
2 жыл бұрын
Nice comparison video for these developers, thank you! Rodianl is generating a nice and fast contrast negative, but it has a more visible grain, going for a print in darkroom would be really visible on a large print. Ddx and hc110 are smoother for grain and contrast, probably more usable. I wonder where you could get more out of this developer when considering a darkroom print! Rodinale 1+50 or stand dev 1+100 for instance. A lower contrast negative would for sure require more work with contrast-filters, dodge and burning, but it offers more possibilities to achive a requested (desiderd) print, while a faster contrast negative would reduce the chances to modify the contrast during the printing process. The comparison should be both with a condensed head ight and diffused head light enlarger, that would be really interesting. BTW, I'd like if you take some time to test a print on paper rather than doing a scan. Cheers^^
@AzrielKnight
2 жыл бұрын
At the time of this experiment I didn't do a paper test because I felt it would introduce other elements. I wanted the test to be "pure" but I have done other comparisons and used paper.
@garrettshum3267
6 жыл бұрын
I've never been satisfied by any of my results with Rodinal at 1+25... I've found it has a tendency to blow highlights and exaggerate grain a bit more than I'd like (even when enlarging). 1+50 gives me much more pleasing results, and is even better on the wallet ;)
@AzrielKnight
6 жыл бұрын
Good to know. I should try that sometime!
@nroclAniffirG
7 жыл бұрын
Great video! I'd recommend trying out DD-X with a tabular grain film like any Delta/T-Max/Acros. I kind of assumed that the name stands for "Delta Developer" since I think Ilford advertises it as giving the best speed and finest grain with the Delta line and in general they seem like they're supposed to be paired. Like another comment mentioned, DD-X is also very high speed - the base time for Delta 400 is actually EI 500 and there is no Ilford-published time for EI 400 with that film - so if you shoot at box speed and dev as recommended you get 1/3 stop speed increase by default. The economy is not that bad either, especially since if you experiment or find times online you can dilute to 1+4 or 1+9. After going through a whole bottle, my favorite B&W film has become a tie between Acros (at 100 or 200) and Delta 400 (at 1600) in DD-X. Finally, I suspect a lot of the similarity between HC110 and DD-X is because (I think) they are both hydroquinone based. HC110 is probably much more concentrated and of course has different secondary ingredients. The primary ingredient for Rodinal is p-aminophenol or something.
@AzrielKnight
7 жыл бұрын
Thanks for the detailed insight! How long would you say DD-X is good for after being opened?
@nroclAniffirG
6 жыл бұрын
Well I'm on my second bottle now, each bottle was open about 3 months before finishing and there were no issues. I keep it pretty air tight by only poking 2 small holes on the foil to pour easily, then make sure the cap is tight after. Stored at a controlled room temp/20C.
@annaandersson8914
6 жыл бұрын
Hi (not reading the comments like everyone else on KZitem ;) ) Thank you so much for this. I´m standing here shopping HC-110 on Ebay and thought "Hey wait.." As a conclusion on seeing this clinical research I think I will buy Kodak HC-110 because I use Kodak film at the moment (Yes Tr-X 400). Other than that I liked the 110 best because of the grading in that reflector,. a light area. Thanks again!
@AzrielKnight
6 жыл бұрын
Glad I could help!
@heresmyurl
7 жыл бұрын
This was great, dude. Really like your presentation style.
@AzrielKnight
7 жыл бұрын
Thanks very much :)
@heresmyurl
7 жыл бұрын
Azriel Knight I have used ddx since I started, I doubt I'll ever change, I'm stuck in my ways
@AzrielKnight
7 жыл бұрын
I said that about hc-110 until I make this episode ;)
@heresmyurl
7 жыл бұрын
Azriel Knight I used tmax dev for some tmax and didn't like it, that was my one deviation. I mostly shoot and develop slide, though
@AzrielKnight
7 жыл бұрын
what's the biggest difference between shooting slide and c41?
@imjusttoodissgusted5620
4 жыл бұрын
I don't know if others are better at examining negatives, but They don't have lab coats. and that makes all the difference.
@AzrielKnight
4 жыл бұрын
lol, thanks. Don't be mad but I have a red one now.
@vladbobe26
6 жыл бұрын
Thank you so much for this video!
@AzrielKnight
6 жыл бұрын
no problem :)
@phasephoto3265
5 жыл бұрын
Fantastic video really useful. thanks for putting in all that effort.
@AzrielKnight
5 жыл бұрын
Thanks :)
@sebastiangutierrez5903
4 жыл бұрын
dude you are the personification of a fun lab partner
@AzrielKnight
4 жыл бұрын
lol, I wish I payed more attention in school ;)
@mamiyapress
7 жыл бұрын
Different developing times for the same film in the same developer refers to different contrast indices i.e. printing the negatives in either a Condenser or Diffuser enlargers, as we now scan our films we have to do many tests to see what works with our particular scanners. I love these experiments and would like to see an exhaustive test on the new Bergger Pancro 400 film.
@AzrielKnight
7 жыл бұрын
Thanks for your comment!
@Alexandermeter
6 жыл бұрын
so nice to see that you also test films and develop combo's, keep up going and like your channel
@AzrielKnight
6 жыл бұрын
Thanks Alexander :)
@thomaspopple2291
6 жыл бұрын
Another great Video! Thanks. I wonder one thing about this experiment. Dev chart vs Box. Using what ddx reccommends I would guess you would get closer to what the Rodinal looked like. That extra two minutes would up the contrast a bit i would think.
@AzrielKnight
6 жыл бұрын
Thanks Thomas. You're probably right, or perhaps a constant agitation?
@DarksideoftheMoon79
7 жыл бұрын
Ro9 lower res higher contrast the ddx and 110 are close the 110 looks to have a little more contrast slightly higher res more grain structure and the ddx looks to have a wider tone range smoother grain structure. My choice would be the ddx for scanning and digital processing purposes for that particular film but they all have merit there are so many options and combinations. I tend to stick with two developers for fast and slow films. imo ilfosol 3 and fp4 pair nicely d76/id11/ddx for 400 speeds ive not got to grips with r09 yet.
@AzrielKnight
7 жыл бұрын
Thanks for the comment! I hear good things about ilfosol 3, just haven't pulled the trigger yet.
@pingiivi
7 жыл бұрын
Hi Azriel! You should try making Parodinal, it should act just like rodinal, but you can make it at home. If you wish I could send you the instructions but they can be found quite easily with a bit of googling :) I have used it for a time now myself and I'm really pleased with it.
@AzrielKnight
7 жыл бұрын
Thanks for the suggestion, how close is it to Rodinal?
@pingiivi
7 жыл бұрын
Azriel Knight it should be pretty close, I don't know if this is the original formula, but you can use the same dilutions and developing times as with rodinal. I use the massive Dev chart app and just select rodinal as developer. This is the formula I use: www.drfrankenfilm.com/diy-rodinal/4575179217
@Igaluit
6 жыл бұрын
Rodinal should always add a fair amount of acutance, or the appearance of sharpness, by sharpening the edges. Also, it's very difficult to compare by scanning alone. The real difference shows in prints. There are also film tests you can do that will completely change the look of any of those developers by changing the "black point"(film speed, eg. 300 instead of 400) and the "white point" (arrived at by lengthening or shortening development time).
@AzrielKnight
6 жыл бұрын
Thanks for the feedback. I realize my experiment isn't perfect, but I think it's a good starting point and since more people scan their negs than print them it works. Having them in the same scan made a huge difference.
@Igaluit
6 жыл бұрын
It's true that most people scan their negatives, which brings up the question if there is a way to adapt the film speed and development testing for scanning. Maybe better technicians than I have an answer. Very generally, older cubic grain films tend to be 1/3 to 1/2 slower (ie. 200-300 for HP-5 and Tri-X) while the modern T-grain tend to correspond to box speed. Ii've found most recommended development times inadequate by at least 10-20%. Thanks for doing the comparison ; it saves us the work, lol.
@randallstewart175
6 жыл бұрын
The technique of adjusting shooting film speed and development time to optimize the density range of a negative image to the requirements of a print paper would work just as well to match a negative image to the requirements of a scanner. The process would be much easier if you used a calibrated step wedge to print a film strip and also as a scan subject. Unlike most of the many videos which play around this subject, that would be a unique and worthy subject to a video.
@Igaluit
6 жыл бұрын
Thanks for the idea. What I was thinking is to use the blank shot that's usually done in a test film and then scan it in order to find the D-max or maximum black point. Adjust the brightness slider scales to get it just to the point of maximum black or D-Max and then apply exactly the same adjustment to Zone I and Zone VIII. Zone 1 for actual film speed and zone 8 for development time.
@blasterman789
6 жыл бұрын
Hc 110 times seem short to me, and I used to process 1000s of rolls of this stuff by hand. They should never be less dense than rodinal. Rodinal is also a compensating developer and will produce a softer highlight roll off than hc 110 which is not a compensator. Sorry, but the density range difference in the negs and obvious under development of hc110 makes this test a bit of a fail.
@1993ianb
6 жыл бұрын
Thanks for making such great videos and testing things out so I don't have to. You have definitely saved me some $
@AzrielKnight
6 жыл бұрын
Glad I could help!
@jippie770
6 жыл бұрын
Great video! I would like to see a tutorial on how to copy old antique negatives for safe keeping (negative to negative), since the originals are quite fragile and bound to dissolve and be lost forever (Nitrate/Acetate type) Also I would like to see a comparison between D-76 and HC-110 on slower films (ie. delta 100) taken with an old box camera perhaps a simply antique brownie with 120 film. Kind regards
@AzrielKnight
6 жыл бұрын
Thanks for the suggestion Jesper. I've never done a transfer before but I am eager to compare D-76 to HC-110 but am more likely to do it on Tri-x with a shutter accurate camera.
@calcitrant
3 жыл бұрын
What is the difference between x-ray film developer and B&W photo film developer? Manual x-ray film developer is very difficult to find with the advent of digital photography. So I tried using Rodinal 1+ 25 with decent results. Although the bottle says it is a one shot developer, I used it just like x-ray film developer, replenishing the developer after each set of films. It seems to be losing it's efficacy after a month which is when I change the developer. I realize this is an area of use beyond film photography, but I am unable to find any information on the web. Any information would help, especially recommendations for type of developer.
@hectoracevedo4545
3 жыл бұрын
I stopped paying attention when I saw you drop your tanks into a sink. What is wring with you?
@markharris5771
7 жыл бұрын
I started with Rodinal as I think did most people and I still use it for 'punchy' images. Mainly use DD-X with FP4 and Delta 100 and D-76 with HP5 and TMax. I'm just about to do my first roll of Acros which I might return to Rodinal for. I found this video extremely informative. I'd love to see the same experiment with slower film.
@AzrielKnight
7 жыл бұрын
Thanks for the comment Mark! I would consider coming back to this at some point with another film! Maybe Fp4?
@markharris5771
7 жыл бұрын
Azriel Knight FP4 would be perfect in my book, it's my favourite slow speed film. Thank you.
@derekkonigsberg2047
5 жыл бұрын
I keep running into frustration and confusion trying to find the "right" developing time to do 400TX in HC-110. It seems like the Massive Dev Chart, the Kodak HC-110 datasheet, websites about HC-110, and the myriad of anecdotal forum posts, all disagree with each other. (Sometimes significantly.) The last time I did it, I used the advice of one such website (dilution E, 6.5 minutes) and I think it came out okay. But I'm still constantly uncertain.
@AzrielKnight
5 жыл бұрын
Thanks for the comment Derek. I think you might be getting too caught up in the "rules" of photography. Especially with Tri-X, it's (almost) all taste. Kodak can't agree with massiv dev, and M dev gets their own hate. Others insist on pushing, or souping it at 24C. The truth is if the photo is good enough, no one questions your methods. Sounds like you're on the right track with some testing.
@toomuchrose
5 жыл бұрын
What you didn't take into consideration is that DDX gives a speed increase over Rodinal and HC 110. So your negatives are not the same. You used 1/30 at f5.6 for all three developers. What this means is the Rodinal and HC 100 negatives have been developed correctly, whereas the DDX negatives are about 2/3 of a stop over exposed for the given development time. To get a more accurate comparison you need to shoot the DDX film at 640.
@AzrielKnight
5 жыл бұрын
That's odd I didn't see that on the packaging or the Mass Dev Chart
@BrandonNevermind
7 жыл бұрын
I love those Rodinal highlights!!
@AzrielKnight
7 жыл бұрын
Agreed!
@Photo_Cyclist
3 жыл бұрын
That Samurai though. Just developed and scanned a color negative out of it. Did it give you blatant out-of-focus performances even in the crisper of daylight as well? Cause it did to me.. (but now I managed to find a way to manual focussing!)
@AzrielKnight
3 жыл бұрын
This was about four years ago, hard to remember tbh.
@randallstewart175
6 жыл бұрын
I appreciate your efforts here, but any difference in contrast is going to be a function of development, so the apparent contrast differences could be easily changed. I'd have gone with the manufacturers' time recommendations because that's what most users will do, as the MD Chart is somewhat subjective in its data sources and recommendations (and does not pretend to be otherwise). Since the scanner doesn't resolve a level capable of image sharpness or grain comparison, I'm not sure what was achieved. And even then, people will complain that whatever dilution you used, some other dilution will yield a different (better?) result. Years ago at the request of my local camera store, I did a comparison like this between D-76 and then-newly introduced Kodak Tmax Developer yielding comparison prints. The store (reaonably IMO) elected not to bother stocking the Tmax Developer.
@AzrielKnight
6 жыл бұрын
Thanks for the comment Randall. I agree, you can take whatever developer and make it look closer to the others. The point of the video was to see what happens when you change one factor. If I followed the box label rather than MD, someone would have complained about that. I am curious about your method of grain comparison, if I can I'll use it and give you a shout out.
@neilpiper9889
6 жыл бұрын
Kodak Xytol developer is ideal for scanning. Rodinal is best for darkroom printing especially in condenser enlargers. Punchy.
@AzrielKnight
6 жыл бұрын
Thanks Neil! I'll try and remember that!
@oxentielreadman
7 жыл бұрын
Hi I love your channel, a very interesting experiment, I'm doing the change from Kodak D-76 to Rodinal, mainly because the Rodinal is more economical and versatile besides can be used very diluted, allowing for example to make an unattended development. Already in aesthetic matters I like that he respects both the highlights and the shadows without stacking them and maintaining a good level of detail in both even if you resort to push the film. And depending on the dilution you can manipulate the contrast according to your personal tastes, that if it is not a fine grain developer so if you do not like it excessively it is better to use it with low sensitivity film 25-200 ISO. A small proposal, I know you're a fan of Kodak, but how about leaving Tri-X and T-Max and try other black and white films like Fomapan, Arista, Kentmere (cheap films) or Ferrania P30, JPH Street Pan 400 or Adox Silvermax (not cheap films) Greetings from Mexico
@AzrielKnight
7 жыл бұрын
Thanks for the comment! I do plan to try and compare more films in the future, for sure!
@tkmedia3866
7 жыл бұрын
Azriel Knight dont forget to give rollei films a try!
@yourmother91
5 жыл бұрын
another great film video. im interested in developer temperature. was wondering if you could do a video or if you already have one. Thanks!
@AzrielKnight
5 жыл бұрын
Thanks for the suggestion Joey! I was planning on that at some point.
@Dale_Willetts
7 жыл бұрын
My personal fave combination is Fomapan 100 and rodinal (Adonal).You can change the ISO of the film mid roll between iso 50 to 400. Then stand dev in 1/100 rodinal for 2 hours, 30 seconds agitation at start then 3 agitations at every 30 minutes.www.flickr.com/photos/dawilletts/34591891255/in/dateposted/
@AzrielKnight
7 жыл бұрын
I look at that photo, and thought "god that's soft" then realized it was a pinhole camera and thought "shit that's sharp!"
@sittig904
7 жыл бұрын
Great comparison. I use stand development with rodinal 100/1 would love to know your opinion. It's a lazy mans process. No temp restrictions and an hour or so development time with one agitation at 30 minutes. By the way, can I get your address I have a few things to share. I still like your show. :)
@AzrielKnight
7 жыл бұрын
Thanks very much Michael! I should try rodinal stand dev sometime. It's on the mental list ;) My address is Azriel Knight PO Box 75100 Calgary, Alberta T2K 6J8
@Yarbols
6 жыл бұрын
I would like to see photo enlarged prints, and have those prints scanned for comparison but I get that that is a pain in the nuts.
@AzrielKnight
6 жыл бұрын
I've considered that, and yeah it would take extra time but the other factors I thought of were things like, temp change in the developer for each print, the variation on scanning the paper individually, which is the right contrast filter to use with my Multigrade paper, etc. At least with the negatives all on the scanner at the same time it shows the relativity to each other, and let's be honest, most people are scanning their negatives these days.
@ghostofsin
7 жыл бұрын
Fantastic as usual, would be a good idea the Caffenol . Regards
@AzrielKnight
7 жыл бұрын
it'll happen ;)
@gyrdin
5 жыл бұрын
Sorry, bud, but you have to change your scanner for comparing 35mm films so you can see a real difference, epsons are just too fuzzy to do that job on this format (for example, Nikon 40/4k/50/5k). With that you could do a pixel peeping and see a real difference. I could send you examples of FP4+ pushed to 200 with Rodinal, HC-110 and ID11 (almost same as D76) so you'll see that there's a bit more to it. Just send me a message ;) P.S.: like the effort though. Good job!
@AzrielKnight
5 жыл бұрын
I agree, 100%. It's a cash flow issue. I could not find a Nikon 40/4k scanner on Google, or do you mean a d40?
@Igaluit
6 жыл бұрын
That's a pain - getting the correct temp and keeping it there. I sometimes check the temp after I empty the tank to see if there was much temp. change during development.
@AzrielKnight
6 жыл бұрын
At the very least the three devs would have dropped in temp at about the same rate. Thanks for the comment :)
@Igaluit
6 жыл бұрын
Yes, you're right about your three fims. The problem I've noticed is the difference in weather changes. In winter, temps are fairly stable, but in summer the temp can rise significantly in the tank. Considering using a water bath in the future.
@1989Goodspeed
7 жыл бұрын
Amazing how much of a difference the diveloper actually make. Cool video, though at 03:58 I got a "How to Basic" flashback. Anyway interesting results.
@AzrielKnight
7 жыл бұрын
LOL, I never thought of it that way.
@juanelandri930
6 жыл бұрын
Just a general question, I shot film for the first time and I'm surprised how noisy and grainy my pictures are. Is it always like that or does it depend on the developer and scanner used?
@AzrielKnight
6 жыл бұрын
Depends on what speed film you used, but if they seem strikingly noisy, I might suspect that your images were underexposed and your scanner has compensated.
@The8TrackChap
6 жыл бұрын
I wonder how these compare against the powder kit developers like Tetenal, Xtol, ID-11, and D-76 etcetera.
@AzrielKnight
6 жыл бұрын
That's a good question.
@nutsackstapler
7 жыл бұрын
I absolutely love this video. I'm currently, and probably the only one who uses this- but depending on the film I use, I use a different developer. HP5? DDX. TX400? HC110/d76. Rodinal? Stand developer for tx100.
@AzrielKnight
7 жыл бұрын
That makes a lot of sense actually.
@nutsackstapler
7 жыл бұрын
Azriel Knight yeah, but DDX is damn expensive compared to the others.
@AzrielKnight
7 жыл бұрын
That's my biggest gripe I think, why the low dose, what's the advantage?
@lassenielsen3308
7 жыл бұрын
Hey Azriel! I really like that you do these comparison videos! Have you considered to compare those three with Caffenol CH? Caffenol is my favourite developer, and gives a really nice contrast! :)
@AzrielKnight
7 жыл бұрын
I got a lot of people say good things to me about it and I think I'm overdue now. ;)
@TheAgeOfAnalog
6 жыл бұрын
Fuji Acros at box speed developed in Caffenal CM-RS is shockingly good.
@dejong431
7 жыл бұрын
Hi Azriel, I like the video, but could you make some prints on paper and also show that result from these test strips? I think that the scanning now distorts the result a bit since the Rodinal seems to have more contrast it shows lighter on your scans. Making silver prints should show the "real" result of the process. Anyway thank you for the videos, must be a lot of work!
@AzrielKnight
7 жыл бұрын
Hi Jan! Great suggestion and I have considered it to the point where I may do a part 2 in the future with these. I'd also like to find a way to obverse the negative super close up, so I can see the grain.
@tomislavmiletic_
6 жыл бұрын
I couldn't say anything for Kodak B&W film since I never shoot it, but when you shoot Ilford try out Ilford's Microphen. If you can fing it. I had used it for years...
@AzrielKnight
6 жыл бұрын
Will do!
@zachmueller2912
7 жыл бұрын
Can you give me your opinion on scanners? What scanner do you use? what are some good options for the amateur film developer? I also do 6x9cm medium format, so I would prefer one that scans those as well. Also, have you tried d-76? I bought it when I first started out because it can be made in small 1 gallon batches. I want to try hc-110, but I would never go through the whole bottle.
@AzrielKnight
7 жыл бұрын
Thanks for your comment Zack. I have only ever owned the Epson V500, and one other similar model that died after 1000 scans that I picked up at a a garage sale. The good news is if you like my photos, just about anything you buy is going to produce better results. I hear the V700 is still a solid choice. I plan to try D-76 at some point. HC-110 is economical and you don't need to make a stock solution.
@TheFlashMoore
7 жыл бұрын
I have been looking for videos on the effects of film overexposure/underdevelopement and how it affects the dynamic range of different film stocks.
@AzrielKnight
7 жыл бұрын
That's on my shortlist! take a roll, shoot at different shutter speeds, develop and try and recover to see how far I can recover.
@TheFlashMoore
7 жыл бұрын
comparisons begin at 11:41
@AzrielKnight
7 жыл бұрын
I gotta say, this blew my mind. I'm going to try it.
@carlosderegil176
6 жыл бұрын
li have some left of HC 110, im developing Ilford film FP4 plus B/W im a begginer, so can you refer me to one of your videos for developing with just HC 110 and fixer, thats all i have and the photoflow. Greetings from Cancun Mexico
@AzrielKnight
6 жыл бұрын
Hey Carlos. Funny enough I don't have a basic developing video. I've seen so many videos I didn't think I could add anything new.
@domas4544
6 жыл бұрын
Hello,Anzriel, can you help me? I was trying to develop Kodak Tri-X 400 with HC-110 Dilution B, I mixed developer 9ml~ with 281ml water (to use with paterson 300ml tank) and used 4 minutes to develop (at 24C). After that I used Tetenal Indicet stop bath and 5 minutes tetenal fixer. The result was almost clear negative.. wtf? What I did wrong?
@AzrielKnight
6 жыл бұрын
Is the edge printing (like the numbers and film name) just as faded? 4 min at 24c, without checking, sounds a bit hot to me, as I dev my tri-x at 20C at about 6 min.
@larrymorris8060
6 жыл бұрын
Is it me or does the neg for rodinal look darker than the rest before the scan then it was the lightest after?
@AzrielKnight
6 жыл бұрын
Could have been the camera's exposure?
@burntoutelectronics
7 жыл бұрын
cool kodak disc badge! i use ilford id-11, its what my grandad used so its what i use
@AzrielKnight
7 жыл бұрын
Thanks :) I bought the badge when I did the episode on Disc film but forgot to use it ;)
@salamander405
Жыл бұрын
Did anyone else misread the thumbnail as “tasting developers?”
@jesslambrou7573
3 жыл бұрын
great video!
@AzrielKnight
3 жыл бұрын
Thanks Jess!
@jacovanlith5082
2 жыл бұрын
Shell V-power vs Caltex Boron vs Esso blabla.
@90vit
6 жыл бұрын
Nice comparison video. Can you make a review video on the Kyocera Samurai X4.0? It is quite a rare camera in Malaysia. Thanks.
@AzrielKnight
6 жыл бұрын
You must be a mind reader, because I happen to have one I borrowed for an upcoming review.
@90vit
6 жыл бұрын
Looking forward to that video. I just happen to buy a cheap Kyocera Samurai X3.0 recently with both dead batteries. After changing the button cell and 2CR5, it is good to go with AGFA vistaplus 200. Cheers!
@tomdonegan
7 жыл бұрын
Hey Azriel, is that the new wireless amazon mic that we discussed in your stream?
@AzrielKnight
7 жыл бұрын
Hey Tom! I wish, that set came in and it was total garbage :( Not your fault, I should have read the reviews, but yeah, doesn't work at all, or total static with occasional human like sounds, which was par for the course to other buyers.
@tomdonegan
7 жыл бұрын
Azriel Knight ah man that sucks.
@AzrielKnight
7 жыл бұрын
You still helped big time, I just need to spend more :P
@alignstudio
3 жыл бұрын
hi any chance you know stand bath ratio and timing for DDX Thanks
@alignstudio
3 жыл бұрын
stand development
@AzrielKnight
3 жыл бұрын
Sorry I don't
@unrequitedpipe
4 жыл бұрын
How do you end up with only partial roles of film?
@AzrielKnight
4 жыл бұрын
Thanks for the question. Open the camera in the dark, cut blind and load in separate tanks.
@TebbieBear
7 жыл бұрын
Love these comparison videos! I would love to see Rodinal broken down further. 1:25, 1:50. 1:100 etc. See what the different dilutions and times do to the image. Perhaps the same for DD-X and 110 as well?
@AzrielKnight
7 жыл бұрын
Thanks for the comment! I was also told I should do hc-110's dilution types so it's inevitable :) I want to do an official first impressions on Rodinal as well.
@bedevere007
6 жыл бұрын
Quick question, I just got adox rodinal and it says 1+25..1+100. Anyway, it's not clear to me how much do I mix with water? My Paterson tank says for 1 35mm film, I need 10oz. How much of that should be the rodinal? Thanks so much
@AzrielKnight
6 жыл бұрын
The numbers provided are ratios, so 1 part chem 100 parts water. so if you have a 100ml tank for example, you'd put 100ml of water, and 1 ml of chem.
@bedevere007
6 жыл бұрын
Azriel Knight thanks Azriel. I found this one websites that shows rodinal and how to develop all different types of film. In my case, I have Fuji acros neopan 100. It mentions that if I use ratio 2:25 instead of 1:50, it looks like I can decrease the development time. Would you recommend that or stick with 1:50. Thanks.
@bedevere007
6 жыл бұрын
Azriel Knight I mean 1:25 not 2:25
@AzrielKnight
6 жыл бұрын
Each will produce a properly developed negative with some slight differences. It's really a matter of personal preference. If you're new to all this ask which will be easier physically. More standing around or more attentiveness.
@bedevere007
6 жыл бұрын
Azriel Knight The development was successful it came out really nice thank you so much. The weak link to me seems to be my scanner because the tray doesn't hold the film flat. I'm going to try and flatten it out and then we scanned it. I have the epson 4490 and it's pretty good but would you write recommend something better?
@pascalszwzeiij1194
4 жыл бұрын
compares apples with oranges ...
@AeonHorus
6 жыл бұрын
why didnt you do side by side comparison? the split view didnt make much sense ad the HC110 was on the shadow side! Also why couldnt we see all three together.?
@AzrielKnight
6 жыл бұрын
cuz
@AeonHorus
6 жыл бұрын
cuz? I'm not your cousin ;) Maybe your dad but deffo not yer cousin! Come on get yer cam out and remake this vid and don't be lazy at the end this time eh ; >
@AzrielKnight
6 жыл бұрын
naw
@themincingninjapoofsawayli898
3 жыл бұрын
9:48
@carlosderegil176
6 жыл бұрын
whats best, HC 110 or D76 for developing?
@AzrielKnight
6 жыл бұрын
never used D76, but I prefer liquid developers.
@bleepbleepohio
4 жыл бұрын
What developer would you recommend for someone who would develop 1 roll per every 2 months? Quality, long shelf life, and price per ounce. Thanks.
@AzrielKnight
4 жыл бұрын
Rodinal
@dougelick8397
4 жыл бұрын
@@AzrielKnight Rodinal has amazing shelf life, but if you shoot smaller formats (35mm or smaller) and faster films (faster than 400), you probably won't like the grain.
@igaluitchannel6644
Жыл бұрын
I've never gotten great results from DDX. Maybe the concentration/dilution is not ideal.
@AzrielKnight
Жыл бұрын
To me it's just expensive
@igaluitchannel6644
Жыл бұрын
@@AzrielKnight it's supposed to be optimized for T-grained films. That's what I used it for and got poor results - at least according to the recommended development. Same with T-Max developer.
@MichaelCarter
6 жыл бұрын
Try developing motion picture 16mm film on 110 Jobo reels
@AzrielKnight
6 жыл бұрын
That's a good idea, where could I get some?
@MichaelCarter
6 жыл бұрын
What, film or reels? I got my reels from a local photography store, Bernie's Photo Center, on East Ohio Street, Pittsburgh. He had a huge box of them like 4 feet high. Or ebay. B&H has film.
@AlexanderGoroshilov
6 жыл бұрын
Make a video about the best developer for extreme push process!
@AzrielKnight
6 жыл бұрын
I'm sorry but at this time I'm not making videos. If I ever pick it up again, that'll be on my list.
@xccude
7 жыл бұрын
Can you do an agitation with stick vs rotation?
@AzrielKnight
7 жыл бұрын
I was thinking about it for sure but did you see my "agitation intensity" video? It covers that is a way.
@xccude
7 жыл бұрын
Yes I did but don't remember if you did one specifically about the turning stick vs actual rotation rather than how vigorous you agitated it.
@AnthonyGrisier
6 жыл бұрын
Would love to see this with HP5+.
@AzrielKnight
6 жыл бұрын
Like HP5, Tri-X and like TMAX or something?
@AnthonyGrisier
6 жыл бұрын
Azriel Knight That would be a nice combo to see.
@trevisonclark7135
3 жыл бұрын
Why does everyone forget d76
@AzrielKnight
3 жыл бұрын
Why does everyone forget to search the channel before making assumptions :P
@trevisonclark7135
3 жыл бұрын
Good point
@user-ss6zt2mo1l
6 жыл бұрын
Yes.. Karma sees even in a darkroom when you are not wearing a lab coat. I hate Karma. Don't tell her I said that.... :-o You can ward off Karma by installing a ceramic Gnome. Even the Linux Penguin scares off Karma. honest ;-)
@omnesilere
6 жыл бұрын
Miss you
@AzrielKnight
6 жыл бұрын
Stay tuned... ;)
@ron5935
4 жыл бұрын
DDX is the best developer IF it is fresh, but how do you know? Date code on the bottle. Oh but you can not read the secret code! It is not a nice date like milk. And it does not change color like D76. So you are stuck. If you know the date code and have to mail order if they will ship it, you are still stuck. Point two is to do a proper comparison you must establish your proper development time by printing, not scanning. Now you have a mess of different contrasts instead of a series where you can compare grain and sharpness alone. You have too many variables. At least you get clicks .
@warreyonwarreyon6952
7 жыл бұрын
Azriel Try caffenol (just reminding you)!
@AzrielKnight
7 жыл бұрын
LOL, yes!
@rodhitchens764
7 жыл бұрын
Love the neck beard dude, you look awesome with it. Totally fits your style.
a woman once told me 'never trust a bitch with no eyebrows'
@klofisch
3 жыл бұрын
10min in DD-X would have been worked out better :)
@tootrue
5 жыл бұрын
Video starts at 3:20
@AzrielKnight
5 жыл бұрын
Man, I wonder how many people will read the comments FIRST and THANK you for saving them allll that time! wait, did YOU check the comments first? No? ;)
@neilpiper9889
4 жыл бұрын
Make the move to medium format.
@AzrielKnight
4 жыл бұрын
Already did, not a fan.
@btrdangerdan2010
7 жыл бұрын
I think DDX does a good job.
@AzrielKnight
7 жыл бұрын
I agree! I hear it's great on grain for higher iso films or pushing HP5.
@btrdangerdan2010
7 жыл бұрын
Azriel Knight yee! Kinda cool you replied! Anyway yeah ddx looks good. Before dropping my film photo class at my junior college I have been using Kodak hc 110(?) developer the whole time to process my rolls of film with Fuji Acros 100 and used Kodak developer to develop t max 400 one time.
Пікірлер: 217