I'm glad you check simple things first because I'm simple-minded! I always like your videos. Thank you!
@RaleysSmallEngines
7 ай бұрын
You are so welcome!
@syedzahid4860
3 ай бұрын
Excellent step by step.
@frankie7508
Ай бұрын
Fantastic job all the way around and your work methods demonstrate consistently excellence. It's my hope that small engine mechanics will emulate your work methods, Because they are truly exceptional. 👍👍👍
@kakanga
3 ай бұрын
With your video, I was able to fix my mower with little experience with this kind of issue. Thank you for making this.
@RaleysSmallEngines
3 ай бұрын
Great job my friend. Glad it helped you.
@freedommowers420
7 ай бұрын
Excellent to the point troubleshooting as always T bone.
@RaleysSmallEngines
7 ай бұрын
Thanks 👍
@Rein_Ciarfella
7 ай бұрын
T, I discovered something on my own today and thought about you immediately. Of all the KZitem channels I watch (dozens), yours has shown the tiny movement of the exhaust valve as it is opened by a cam lobe for compression release more often than any other channel. It’s a difficult thing to show and see on camera. I’m currently working on a B&S flathead engine that threw its intake valve seat. As I was removing both valves and springs and rotating the crank I realized I was seeing the exhaust tappet move a smaller distance and then a larger distance. I knew what that was immediately. I rotated the crank several times with a finger on the end of the tappet and it was then very easy to feel and see when the release was activated. I then did it some more times and discovered that the release is activated approximately 360 degrees from the regular valve opening. For a relative newbie to the workings of an engine this was really neat and a revelation. 😁🔧👍 If you happen to be doing a valve job on a flathead sometime this might be another way to show viewers how this works.
@bertgrau3934
7 ай бұрын
A fast, simple fix. Another informative video. Thank you sir. 😊
@RaleysSmallEngines
7 ай бұрын
Thanks for watching!
@DustyRusty81
7 ай бұрын
I've got a Kohler Courage on my Cub cadet mower too, It runs really good after 15 yrs, thanks for the tips
@RaleysSmallEngines
7 ай бұрын
Good to hear
@renatogoncalves2412
4 ай бұрын
Awesome video. Mine is doing the same thing. I will try this tomorrow!!! Thank you T-bone!!!!!
@RaleysSmallEngines
4 ай бұрын
You're welcome, hope it helps you
@rauljr9869
7 ай бұрын
Great tips for troubleshooting this issue, very detailed and informative. Thank you Mr. T Bone
@RaleysSmallEngines
7 ай бұрын
Glad to help. Thanks for watching and commenting
@michaelfarris2556
7 ай бұрын
Thanks for all the help T Bone i have actually used many of your methods. Never hurts to get a little help from them. Thanks again
@RaleysSmallEngines
7 ай бұрын
Awesome! Glad you like our videos my friend.
@davidstark8894
7 ай бұрын
Another fast fix! Thanks for sharing all of your repair videos.
@RaleysSmallEngines
7 ай бұрын
Thanks for watching!
@aunttriciaattic
Ай бұрын
Thanks
@robpursley7607
2 ай бұрын
nice video.
@Adem19811
3 ай бұрын
First time I see his videos and boommm. 💣 I must follow this MAN💪🏻. Keep it up man. Keep helping people. Wish u good health!
@RaleysSmallEngines
3 ай бұрын
Thank you so much for taking the time to leave a comment my friend
@Turningwrenches85
6 ай бұрын
It's nice seeing the bucket engine that still runs, and the bolts didn't come loose and hit the flywheel, causing a crack in the block. Good tips t bone on that no start issue
@bigsonslawncare
7 ай бұрын
TBone does it again! Another Courage lives👏🏾
@syedzahid4860
3 ай бұрын
You are great teacher!!
@RaleysSmallEngines
3 ай бұрын
Thank you. We appreciate you taking the time to comment
@williammoore2417
4 ай бұрын
Enjoyed the video thank you great info
@chrisgarland2272
7 ай бұрын
Dude I love the comments on dropping stuff. Thats the same things I say every time!!! 😂
@porkypineacres3536
7 ай бұрын
If I had to guess what was in the carb was a very small piece of the rotten fuel line. Really enjoy your videos T-Bone. I learn so much on small engines.
@RaleysSmallEngines
7 ай бұрын
Great point! Thanks for watching.
@philheese1728
7 ай бұрын
That was simple! Great vid!
@RaleysSmallEngines
7 ай бұрын
Appreciate it!
@francislang5075
7 ай бұрын
i like all of your videos
@RaleysSmallEngines
7 ай бұрын
Thanks my friend.
@wesleyhathcoat1271
7 ай бұрын
Easy fix but with experience it was very easy.
@liljoeii6091
7 ай бұрын
HI GUYS AWESOME VIDEO THANK YOU FOR THE VIDEO
@RaleysSmallEngines
7 ай бұрын
Our pleasure!
@JM-mx8dr
5 ай бұрын
T Bone is the real deal. Glad that I found this channel.
@Mrs.T-bone
5 ай бұрын
Thanks for your support!
@steamboatwillie935
7 ай бұрын
Hey T-bone, my thought was it's most likely the rubber tip on the anti-backfire solenoid. In that style solenoid, the rubber tip comes loose. Then gets stuck in the up position. Restricting the fuel flow. The solenoid, without this rubber tip feature, is a much better design. Better yet, take some side cutters & clip the pin. Bypassing the solenoid all together.
@RaleysSmallEngines
7 ай бұрын
You are correct, I've seen that many times.
@dnrsmallenginerepair
7 ай бұрын
Great job my friend sorry I have not been around much
@RaleysSmallEngines
7 ай бұрын
Thank you
@garyclark1135
7 ай бұрын
Thanks, T-bone.
@RaleysSmallEngines
7 ай бұрын
You're welcome, thanks for taking the time to watch and comment my friend.
@frogfoot198
7 ай бұрын
Forgive me for saying but I was taught that an engine needs 4 things to run…fuel, spark, compression, and also timing. If you have a sheared key, a broken timing gear, or bad cam it ain’t gonna start. Just my 2 cents worth. You’ve probably forgotten more than I’ll ever know. Love watching your videos. It’s like sitting there watching and listening to my uncle work on small engines.
@hester781
7 ай бұрын
I don’t think you’re wrong, however I was taught that in the diagnostic end of the categories of fuel spark compression each has its own subdivision of specifics. Like for instance timing is actually related to all three categories as it can affect each system differently. So it’s more of a fundamental starting point than an absolute 👍🏻
@Rein_Ciarfella
7 ай бұрын
5 things - FACTS - Fuel, Air, Compression, Timing, Spark!!! Whenever I’m diagnosing I keep those at the forefront of my mind so I cover all the bases. Yes, JD, some can be sub-categories or ancillary, like exhaust is ancillary to Air/intake. Lack of either will cause one condition. I’m just saying keeping FACTS in mind all the time will avoid missing critical details which are easy to forget or overlook.
@williamphillips1475
7 ай бұрын
like the way you explain how do thing
@RaleysSmallEngines
7 ай бұрын
Thank you
@The-Armed-Pacifist
7 ай бұрын
Customer should be very happy.
@The-Armed-Pacifist
7 ай бұрын
I’m wondering if a small piece of that deteriorated fuel line broke off during the carb change and got into the system.
@RaleysSmallEngines
7 ай бұрын
Very possible
@The-Armed-Pacifist
7 ай бұрын
@@RaleysSmallEngines Am I hired?
@RaleysSmallEngines
7 ай бұрын
@The-Armed-Pacifist 😆
@Pete.Ty1
7 ай бұрын
👍👍👍.Thanks T-Bone
@RaleysSmallEngines
7 ай бұрын
You're welcome
@JimAlexander-d8o
3 ай бұрын
W ell done TBone. Thanks. Great video and teaching approach. Is there a Husqvarna thread? My yth24v briggs 44R877 starts up runs awhile and then Peter's out. Air filter, check. Fuel, check. Spark, definitely. It slows and then revs, then dies. Hmm. If there's a thread with others experiencing that and problem solved, I'd listen. In the meantime, I'll take apart and clean the carb.
@Big_Johns
7 ай бұрын
Nice fix T-Bone and good video brother. 👍 Hey Mrs T-Bone 👋
@RaleysSmallEngines
7 ай бұрын
Thanks 👍
@Big_Johns
7 ай бұрын
Yes sir
@billsmith1770
7 ай бұрын
the needle sometimes gets stuck in shut position . tapping on side of carb will sometimes jar it free .
@frisk151
3 ай бұрын
I want to THANK YOU! AT 16. I got a 79' Z28 with an engine that had been swapped for a "corvette" (blah blah - I just wanted wheels.. It had been abused before it discovered my lead foot.. Rebuilt that engine after a cracked head on day 2... Long and short.. For every hour I drove it, I worked on it for a legit 3 hours.. Bloody knuckles and curse words that hurt so bad, they could be unrecognizable.. I've full built and short block swapped (and everything inbetween).. I never did a transmission repair, but lord knows all these decades later, with Suncoast rebuilds of Dodge Trashmissions on my 06 fully built midlife crisis.. ONE THING.. I KNOW and APPRECIATE!!!! Trial and error sucks... 51 now.. I go to KZitem on father's day to fix his mower and troubleshoot.. GOT IT.. Sparks alive and sow is the mower.. 2 acres of hot texas h3ll (hopefully before he wakes up), and all is good! He's a combat vet from nam 68'.. Taught me about mechanics and all of the above when I didn't know jack.. Being able to fix this Husqvarna 48 w/ same engine, and help him do what is now very hard for him to do is just awesome! I truly thank you for this video.. HOPE not to need your help again, but I am fully subbing up, liking, and I'm sure (imagine that - he has a bunch of relics he'd love to push.. (No chainsaws for him.. But, I need to fix his STIHL.. ;). Happy Father's day to you! Blood or by way of mentoring.. Done both!
@brianlondono2768
2 ай бұрын
You got a new subscriber Tbone
@STTC
7 ай бұрын
Toooooooo easy 👍🏻
@RaleysSmallEngines
7 ай бұрын
Heck Yeah lol
@Ibrahim.214
4 ай бұрын
And that gasket behind the plastic plate is was came off my mustang xp, now question where to find it to order a new one, and question #2 is, is it really needed or can I smack this new carb in.. 8:06
@toolinhand
7 ай бұрын
Simple things first. If only everyone practiced that.
@Geopolitic157
7 ай бұрын
Dr. T Bone, the small engine surgeon.
@TheRustyRooster
7 ай бұрын
Woo-hoo T-Bone strikes again.
@janiceblack6951
Ай бұрын
Were you using starter fluid at first and then carburetor cleaner?
@RaleysSmallEngines
Ай бұрын
I never use starter fluid, too hot for small engines in my opinion. I always use a flammable brake cleaner to start engines and even to clean carburetors. It works great and drys very fast. Thanks for watching and commenting
@steventwindley4907
5 ай бұрын
T-Bone, how do you start it without engaging the safety switches like on the seat etc?
@RaleysSmallEngines
5 ай бұрын
Most machines can be started by simply setting the parking brake. Then you don't need to be in the seat to start it.
@David-zs7bi
4 ай бұрын
T-bone I have a kohler command 16hp on a Lt160 Jd what's your opinion on this engine. Thanks enjoy your videos.
@RaleysSmallEngines
4 ай бұрын
The command engine is a good Kohler engine. The Kohler Courage is a boat anchor ⚓️
@David-zs7bi
4 ай бұрын
@@RaleysSmallEngines Thanks
@mikebrooka9395
7 ай бұрын
I made a living doing what you do. Kiss is one of my favorite bands. Kiss comes in for keep it simple, stupid. Mikel
@Look_What_You_Did
4 ай бұрын
Keep is stupid simple. You ameritards and your name calling and ghay bands.
@mikebrooka9395
3 ай бұрын
@@Look_What_You_Did call as you see it from your perch
@ashwinlal
5 ай бұрын
What was it that you sprayed into the carb in the beginning to get it to temporarily start? Carb cleaner or starter fluid?
@RaleysSmallEngines
5 ай бұрын
Brake cleaner
@ashwinlal
5 ай бұрын
@@RaleysSmallEngines Thanks! Could I spray starter fluid in there or is that not good?
@RaleysSmallEngines
5 ай бұрын
You can but in my opinion it's too harsh. That's why I use brake cleaner or carburetor cleaner. ( make sure it's the flammable kind)
@ashwinlal
5 ай бұрын
@@RaleysSmallEngines Thank You!
@eddieegan4077
Ай бұрын
I managed to get an engine that was turning over but not starting to start using quick start fluid and it ran for about a minute or two, I shut it down and tried again a short time later and it started using the quick start. Since that I've had no luck, what could I be missing?
@jamespritchett1886
3 ай бұрын
Enjoy ur step by step directions on eliminating on thing to the next. Just a easy way hunting down the problem
@lucasf6495
2 ай бұрын
So I have the same motor but it’s surging and the governor arm coming out of the block is moving back and fourth I am at a loss
@denniss2847
7 ай бұрын
T Bone is the best
@michaelhelton9923
4 ай бұрын
How can I fix a Husqvarna that is stuck on high compression
@RaleysSmallEngines
4 ай бұрын
Check your compression release. I have a video on that, not sure which ones, but there a couple. I think the cam replacement video covers that issue.
@robertmailhos8159
7 ай бұрын
Not another kohler courage no start issue kholer courage the engine with the flying v ohv cover 😮😮
@RaleysSmallEngines
7 ай бұрын
LOL Yep. Too funny, flying V
@steamboatwillie935
7 ай бұрын
@@RaleysSmallEngines Flying right to the dump !! Courage engines suck !
@RaleysSmallEngines
7 ай бұрын
@@steamboatwillie935 🤣 yep
@orange6092
7 ай бұрын
The 17HP Courage on my Bronco has been great. Change the oil 2X a year, regular filter changes, no problems thus far.@@steamboatwillie935
@billyraycobb638
7 ай бұрын
I have 2006 troy bilt super bronco some one gave me it has a Kohler 19 HP 597cc twin cam model number 13Ax60Tg766 it missing filter boxs and cover and the plastic engine cover and bolts and nuts I look and l can't find none can you help me thank you
@RaleysSmallEngines
7 ай бұрын
Yes, I have a used engine cover, air cleaner back and front piece. Where are you located? You can email me at Raleytrans@gmail.com. We get a ton of emails, if I don't respond email me again. It's best during our normal business hours, you can find that on Google.
@billyraycobb638
7 ай бұрын
@@RaleysSmallEngines I live and Tool Texas by cedar Creek lake
@billyraycobb638
7 ай бұрын
@@RaleysSmallEngines How much for the parts I get paid Friday
@Dannyaudio69
7 ай бұрын
I need help also....my mower engine just spins but won't start...i tried your steps and it still didn't fire up...i have spark. and gas goin to the carb....what can it be that it's just spinning
@RaleysSmallEngines
7 ай бұрын
First, did you give it a shot of flameable brake cleaner or carb spray into the carb?? Did it run and die? We will take this one step at a time. Please understand if I'm slow to respond due to the amount of questions coming in.
@Dannyaudio69
7 ай бұрын
I sprayed the carb exactly like you did ..and it did not start and die@@RaleysSmallEngines
@RaleysSmallEngines
7 ай бұрын
You have blue spark? If so it's time to check compression and flywheel key.
@Dannyaudio69
7 ай бұрын
@@RaleysSmallEngines ok when im free i will try the compression and look at the flywheel key...do you have videos on how to do the compression? And how to take off the wheel? I have all the tools to do this work....its a Briggs & stratton model #283707 type 0217-01
@Rein_Ciarfella
7 ай бұрын
@@RaleysSmallEngines T, I’m really impressed and pleased with your willingness to work through the diagnostic process with someone in the comments section of your videos. I think this really shows your character. Well done! 👍
@alexisdempsey1671
6 ай бұрын
But what if it isn’t a fuel issue 😅 what’s the next trial?
@Look_What_You_Did
4 ай бұрын
He proved it was a fuel issue. Ketchup.
@robcole332
7 ай бұрын
HAHAHAHA. With you mic on that final start up it sounded like it was running on alcohol with a big lumpy stick
@RaleysSmallEngines
7 ай бұрын
😂😄
@renepedersen9640
4 ай бұрын
Hello Can I ask you for help somewhere René Danmark🇩🇰
@rayburnett3066
5 ай бұрын
Single cylinder
@Look_What_You_Did
4 ай бұрын
Break a lot of carburetors acting a fool like that. Some people have no respect for other peoples property.
@DarrellCoulter
6 ай бұрын
New Kohler engines are assembled in America, not made. Kohler is 49% Chinese owned, 51% Kohler. Using a lot of Chinese parts. Won't buy one now.
@Look_What_You_Did
4 ай бұрын
Awwww... Chiiinaaaaa!!!!!!!!!!!!!! You pay trump? He needs you.
Пікірлер: 119