Yes thats true but along with is a price. These two machines in severe duty, wrong . What hourly rate are they getting here for machines ??
@chagys5035
3 жыл бұрын
Muy muy bonito tu video saludos desde Oax México 🇲🇽
@kerenepucroft8931
2 жыл бұрын
good work . rock an roll keep it up
@gododgers3491
4 жыл бұрын
Beautiful area to work in. Thanks!
@ArthurDentZaphodBeeb
4 жыл бұрын
Fantastic. Could watch that all day.
@toddgreenwell9568
2 жыл бұрын
Great video Giles maybe a rock breaker was also needed those rocks look hard on the machines. Thanks for sharing buddy 👍👍
@roypeck2969
2 жыл бұрын
They know how to work together good job
@frankbertola3662
4 жыл бұрын
Taught me what to look for in the abused machine list. Just a little fracture hey ( soft explosives)
@genecoppedge5972
4 жыл бұрын
Working those machines like rented mules.
@rogerwoodland2587
3 жыл бұрын
no working those machines as they have to be used this is a rough rocky environment to use these machines any over way would be inefficient or very slow.
@robpeters5204
4 жыл бұрын
Maybe get a machine with a hammer attachment to finish breaking the larger pieces instead of killing the equipment faster. Work smarter.
@2626stephen
4 жыл бұрын
What a view from your office window ......those rocks playing hard to get
@stewartfrye
2 жыл бұрын
Ive watched these two operators try to dig and rip INTO the hill, try digging AWAY from the hill
@dennissmith4566
4 жыл бұрын
Ya know, this sort of thing is why they use explosives. One little boom and Barny comes out way easier. Barny Rubble that is.
@samnelsen7658
4 жыл бұрын
Exactly what I was thinking! By the time this job is finished so will the equipment.
@Rokdar1
4 жыл бұрын
@@samnelsen7658 ST00PID is as ST00PID does.
@davidwillard7334
2 жыл бұрын
@@samnelsen7658 A Bit ! Untrue ! That !
@vladimirkozirev
4 жыл бұрын
молодцы.УДАЧИ ВАМ
@keepingdistance4404
4 жыл бұрын
I was expecting the Komatsu to roll that boulder right down the hillside and into the Volvo or the sleepy little town.
I've never seen a Volvo sweat, but props for not beating the pins out of that 750; however watching that 375 made my back hurt.
@greg9403
3 жыл бұрын
In the day they abuse the equipment and in the night the mechanics fix all the bearings and cracks. No warranty on these machines
@toufiklebciralgeria1541
4 жыл бұрын
Nice video
@KhmerShare168kh
2 жыл бұрын
So amazing video 😍😍😍😍
@steveaguinaga3821
3 жыл бұрын
I have little to no experience in this. Me too... Hard to watch. No hammer? No explosives? Putting a lot of stress on that dozer blade and arms. None the less... Im jealous.. Wish i was there having that job
@inikkor61
3 жыл бұрын
Mother of God... the wear and tear!
@brianquigley7336
2 жыл бұрын
Fast way to wear out nice equipment.
@fitrah93game
4 жыл бұрын
Nice bro
@germorales2630
Жыл бұрын
Wow the best brand of beast is here What is the best or strongest machine between komatsu hitachi volvo cat ?
@jediyoung3471
3 жыл бұрын
Community of big machines of big brands
@briangardiner1015
4 жыл бұрын
How much deeper did they have to go? That is tough because there isn't enough rock to blast, but just enough of a pain to have to remove them. It is something you just have to take your time on.
@mdraselmiah2530
Жыл бұрын
GOOD JOB
@user-qy7td6ky1z
4 жыл бұрын
I love Excavator 🇹🇭🇹🇭👍🏻👍🏻
@AhmadNorMaulanaAfsan
4 жыл бұрын
2 big machine from komatsu and volvo
@mrsguyfawkes3083
4 жыл бұрын
A komatsu 575 would have shoved that poxy Rock 😉
@MrAJWorks
4 жыл бұрын
Monster💪💪💪
@maplemanz
4 жыл бұрын
They are working up with the clouds.
@leonsalomon2967
3 жыл бұрын
what this project ?new road from Paris to Chamounix ?
@foxsoul7899
4 жыл бұрын
What do they build up there? ... Very impressiv video! :)
@foxsoul7899
4 жыл бұрын
@rats arsed oh okay :) ... thank you for your explanation! :)
@Quadboueux
4 жыл бұрын
Preparing a ski slope? Need heavier machines :-)
@MrDriftspirit
4 жыл бұрын
this very hard use needs a very short service interval afterwards. bearings and seals must be worn down extremely fast. never seen modern expensive machines this hard in move
@rogerwoodland2587
3 жыл бұрын
its all been taken in to account and factored in don't panic.
@Oneguyinc.
2 жыл бұрын
Yeah no shit get a breaker! It’s sad to see rookies beat on nice gear omg
@coreyhoward8950
4 жыл бұрын
Looks like a job for a dragline.
@henrykpawetadeusz4538
3 жыл бұрын
AC/DC - T.N.T. (Live At River Plate, December 2009)
@Stavrakasgr4
2 жыл бұрын
😂😂😂😂😂
@deccarobbo1955
4 жыл бұрын
there is nothing we can't engineer, we are top of the chain
@jaredwaid622
4 жыл бұрын
I guess a breaker would slow down production on ledge??or process only
@Nick-nw6zg
4 жыл бұрын
Shouldn't be yankinup ROCKS over his drive sprockets‼️🇺🇸
@matti1111
4 жыл бұрын
Nick Spector my thoughts also .The final drive never meant to take that
@ArthurDentZaphodBeeb
4 жыл бұрын
Sure hope it's a rental. But more than likely headed directly to auction after the job for a "nearly new" machine. Lol.
@donnebes9421
4 жыл бұрын
Matt I hey! Who is that in your picture carrying you? 🤣
@bullbikkov7239
4 жыл бұрын
Good observation Looks like they’re first day in those machines
@kasimchannel8417
2 жыл бұрын
So goot 👍
@andrewrees8749
4 жыл бұрын
What are they building up there ? Great view too .
@mikewhipkey6863
3 жыл бұрын
ski slope/ resort I think that's what I saw
@rogerioarcanjo7619
4 жыл бұрын
Serviço bruto dois equipamentos top
@timopauna6698
4 жыл бұрын
Big machine and Big rocks
@johnmitchell1614
Жыл бұрын
A lot if dry grinding going on there?
@BillRayDrums
4 жыл бұрын
What a view! Switzerland, right? I was just there near Basel.
@french_machinery_channel
4 жыл бұрын
No, France (Valmeinier, Savoie)
@BillRayDrums
4 жыл бұрын
@@french_machinery_channel That's by Montpelier, I played there with Ike Turner back in 2004.
@user-ny9fz1dj1l
4 жыл бұрын
@@BillRayDrums صباح الخير
@user-ny9fz1dj1l
4 жыл бұрын
@@BillRayDrums صباح الخير
@user-ny9fz1dj1l
4 жыл бұрын
@@BillRayDrums مرحبا
@Bigdangleebles
3 жыл бұрын
What a balls up!
@adampapke1894
4 жыл бұрын
I would sure as heck hate to be at the bottom of the mountain sight seeing
@arkadiuszfalinski1609
4 жыл бұрын
if I had to do it, I'd go crazy
@Species5008
2 жыл бұрын
So....you've done it?
@user-yc9xz7sb6u
6 ай бұрын
포크레인 으로 뿌레카 탕땅 몇번치면(중간,중간) 울려서 작업이 쉬운데?
@rogerwoodland2587
4 жыл бұрын
challenging conditions its what makes it interesting.
@jamescollins4260
2 жыл бұрын
That lad is rough on the dozer.
@jameslindley924
4 жыл бұрын
Needs Bigger tackle by the looks of it but doing ok until something goes Peetong
@rogerwoodland2587
3 жыл бұрын
its though work but they are getting the job done.
@shumcr
4 жыл бұрын
the rocks never stood a chance against those 2 beasts
@azizbah555
4 жыл бұрын
This job is very exhausting
@tomclements7590
4 жыл бұрын
Blast first then move , waist the machine, but im not paying for it to hard on the machines, my opion
@seemak410
4 жыл бұрын
우와..... !!!
@johnmitchell1614
2 жыл бұрын
What happened next !?
@user-pd1up2fc7x
4 ай бұрын
Японцы делают вещи
@vincentrigal8664
4 жыл бұрын
Belle vidéo, machine impressionnantes ou la mécanique et l'hydraulique sont mise à l'épreuve !!! Faut que se soit solide avec de bon chauffeur pas bourrins ! 👍merci Gilles
@longcaster
4 жыл бұрын
Just think, a hundred years ago most of that work was done by hand.
@aquaden8344
4 жыл бұрын
There must be a reason they don't use explosives! You don't see, what is near this construction site. They are not doing that just for fun. Some environmental or regulatory issue must dictate this procedure.
@samnelsen7658
4 жыл бұрын
Small charges and scatter blankets would cover missile hazards. Or deep brissant charges for shattering. Or even an eccentric ripper would be a better choice.
@user-pd1up2fc7x
4 ай бұрын
Камацу красивый и мощный
@hjorleifuringason2778
4 жыл бұрын
Why the f....aren´t they using impact ripper or breaker on the Volvo?
@jameslindley924
4 жыл бұрын
Would have thought itd be cheaper to blast than risk bustin an Arm
@rogerwoodland2587
3 жыл бұрын
its already been blasted.
@jameslindley924
3 жыл бұрын
@@rogerwoodland2587 Not enough by the looks of it
@CHANNELYOTOQIU
3 жыл бұрын
amajing super kuat👍
@user-tj6rv3xd8y
4 жыл бұрын
Отличная техника!!!Работают не профессионально!!!
@GILDOR-ed2yv4lx4n
3 жыл бұрын
Вообще не понятно что они пытаются делать!? Пол часа один камень вдвоем стоят облизывают со всех сторон 🤷🏻♂️
@alexanderreva505
Жыл бұрын
Все во всём мире работают по разному. Не надо никогда никого хаять и обсерать.
@jakou31
4 жыл бұрын
focking rock ! xD
@mattcrou2772
3 жыл бұрын
J’ai mal pour le bul 😩
@bektasboyraz3555
4 жыл бұрын
Ne kadar acemice bir çalışma bunu paydanda hiç düşünmüyordu millet buna bakınca rezilliği görecek diye . Böyle acele ve acemi bir çalışma görmedim yazık o dozere
@stevenatkinson3143
4 жыл бұрын
I'd be unhappy with the amount of production vs the cost of running those 2 machines, I'd either park the 375 or put it to work on another section, the Volvo needs to spend some time on the bench with a hammer on, there wrecking the equipment for very little m3 per hour.
@crinosis2302
4 жыл бұрын
Is not that they do this every single day for a whole year.
@rossgray3070
4 жыл бұрын
Depends on the rate they have on it to do it, they might have real good money on it and they could be making a killing on it or it all could be on hourly rates, who would know.
@stevenatkinson3143
4 жыл бұрын
@@rossgray3070 I understand that but even if they are working on an hourly rate someone is paying for all this equipment , if it was me I'd be on their case big style cos there not working correctly there.
@rossgray3070
4 жыл бұрын
@@stevenatkinson3143 That maybe true but they are making progress, thats difficult ground in anyones language, I know I have been a plant operator for over 50 yrs and worked in stuff like that, its a hard slog for sure but I would say they knew what they were in for when they priced the job, thats why they have got big toys on the job.
@GOLDSMITHEXILE
3 жыл бұрын
@@stevenatkinson3143 I'd guess the people who own the machines paid for them with a grant or subsidy from the eu empire, easy come easy go
@rudolfhurlimann5336
4 жыл бұрын
Widerstand der (Walliser ?) Alpen !
@stefenosthepom2649
4 жыл бұрын
A new boot on the Volvo might help...
@NocyMusic
4 жыл бұрын
The human power unstoppable machines vs nature
@jcbhitachirider3098
4 жыл бұрын
🚜🚜🚜🚜
@hank5655
4 жыл бұрын
The dude running the big 750 Volvo must have missed the part in school when it comes to leverage he must still think WHATS LEVERAGE AND HOW DO YOU USE IT The guy in the dozer must drink everyday working with that Vovo operator!!!!!
@MikeM-ww3so
4 жыл бұрын
The Dozier operator is pissed off that he ain't running a d9 cat 😄
@hank5655
4 жыл бұрын
@@MikeM-ww3so I bet your right I like lots of power as much as the next guy!
@jonka1
4 жыл бұрын
I can't help thinking that the driver of the Komatsu isn't the owner. This is hard to watch.
@nuclearbum9858
4 жыл бұрын
never seen a machine cry like that....crazy
@bladerunner6354
4 жыл бұрын
Agree jonka1 I don,'t gett it.
@stefenosthepom2649
4 жыл бұрын
He will pull off a corner tip...
@cluideman
4 жыл бұрын
Where is the hammer ffs.....talk about wasting time and diesel
@Thehoelogdog
3 жыл бұрын
I saw the hammer in the background. Sure would make things easier I think.
@balznothiger906
4 жыл бұрын
Nice pictures. Looks like somewhere in europe. My guess switzerland🤔
@Thegoatt84
4 жыл бұрын
France
@user-ny9fz1dj1l
4 жыл бұрын
@@Thegoatt84 صباح الخير
@user-ny9fz1dj1l
4 жыл бұрын
@@Thegoatt84 صباح الخير
@user-ny9fz1dj1l
4 жыл бұрын
@@Thegoatt84 كيف حالك
@user-ny9fz1dj1l
4 жыл бұрын
@@Thegoatt84 فديو جميل ورائع
@MikeM-ww3so
4 жыл бұрын
That Komatsu is going to be junk by the time that job is finished. That creaking sound ? That's metal straining on metal 🙄
@rogerwoodland2587
3 жыл бұрын
in certain circumstances oil and grease can't be used because oil and dirt becomes a grinding paste and makes the problem worse.
@jameslindley924
3 жыл бұрын
@@rogerwoodland2587 What Circumstances ?
@davidwillard7334
2 жыл бұрын
What are you Doing ! With the Rocks !?? Once there out Of the Mountain !?? Then !
@salhxald2347
3 жыл бұрын
ماشاء اللة ملك البلدوزراتكوماتسو
@UnknowableAbsolute
Жыл бұрын
Too huge and heavy stones, i think here needed more heavy machinery, d475, d11 and large hydraulic excavators, something like liebherr r9200, or use TNT before and use this vehicle
@nuclearbum9858
4 жыл бұрын
there has to be a better way ...these machines gone age really quick on this job
@rogerwoodland2587
3 жыл бұрын
the cost is already been factored in. don't worry.
@nuclearbum9858
3 жыл бұрын
@@rogerwoodland2587 you the one thats got to worry all my contractors do this smarter
@Oneguyinc.
2 жыл бұрын
Oh look there’s a breaker in the background
@eliasabapillo6904
3 жыл бұрын
quiero trabajar ahi soy de argentina.
@harrytaylor6854
4 жыл бұрын
OUCH
@user-en5bw2ys6u
2 ай бұрын
Трудяга в Магадане 13ом работал.
@kylecorfman5632
3 жыл бұрын
Why the fuck was he trying to pull that rock up like that haha jesus christ that's funny shit I could have done that in about half the time
@user-fz3de1wj3c
3 жыл бұрын
volvo👍💪💪
@lethukuthuladerrick5522
Жыл бұрын
Why didn't they blast the rock, it could have save time and cost I think. The equipment I think is being misused here.
@Yogibaba.multibaba
4 жыл бұрын
rock breaker could be useful..
@kdw75
3 жыл бұрын
Lightly used machine for sale. Only 1,000 hours. Like NEW!
Пікірлер: 257