Lance aka CrucialRc at it again with the smokin hot repairs and tech talk get with him for everything RC Homies 💪🏿💪🏿💪🏿🙏🏿
@CrucialRC
2 жыл бұрын
Thanks Coach!!✌🏽
@CrucialRC
2 жыл бұрын
I cant believe I forgot my CrucialRC logo in the bottom right corner🤦🏾♂️😂
@rcOhio
2 жыл бұрын
Great idea man! I like how you brought it out so far too. I once lost a pin my front bone. Fortunately didn’t lose the pin! Anyway thanks for sharing
@CrucialRC
2 жыл бұрын
You got it Todd. I'm sure you can use this little nugget too. Ive never loss a bone pin, but just making sure. Loosing the 1st round like that was a little sickening. LOL
@1FIFrc
2 жыл бұрын
Good tip!! And cheap to do. I used the stock rear shaft in the front and then bought the upgraded rear uni drive for the back. That cost me more than some heat shrink tho 😆 Keep it up Crucial 👊🏽
@CrucialRC
2 жыл бұрын
😂 Yeah a little more expensive. LOL
@peterago1082
2 жыл бұрын
good idea, never saw heat shrink with adhesive
@CrucialRC
2 жыл бұрын
I cant find it without anymore. Lol.
@Niobium23
2 жыл бұрын
Thank you! Genius little fix!
@CrucialRC
2 жыл бұрын
You're welcome! Thank you for watching and commenting👍🏽
@Victic005
9 ай бұрын
Gotta do that when I assemble my Vekta.
@CrucialRC
9 ай бұрын
Yup 👍🏽
@bluegroovemodelsports9650
2 жыл бұрын
Great little tech tip. Thanks for sharing
@CrucialRC
2 жыл бұрын
You got it👍🏽
@jerseyjasongasrc2576
2 жыл бұрын
Retaining compound on the pin helps as well if you haven't tried that put on set screw and the pin ! Shrink wrap cool safety blanket also!
@CrucialRC
2 жыл бұрын
Bet. Luckily never had an issue with the pin coming out the bone but gonna keep that in my memory bank for the bajas. Thanks Jason💪🏾
@MRBRUSHLESS
2 жыл бұрын
Awesome video Bro 😎 good stuff on the mod!! Great job thumbs up 👍
@CrucialRC
2 жыл бұрын
Thanks Scoot💪🏾
@cmbscx1084
3 ай бұрын
Nice Tech Tip. That Receiver box is killer. Wil have to find out where i can can buy one.
@CrucialRC
3 ай бұрын
Thanks. Those batt boxes were a limited batch and the guy who makes them hasn't been around in a long time 😭
@jukkaovaskainen
2 жыл бұрын
Nice DIY 👍
@CrucialRC
2 жыл бұрын
Thank you 😊
@cyclonerc1625
2 жыл бұрын
All Right First 👍🔥🤪😎
@CrucialRC
2 жыл бұрын
Boom!
@joshkiel9405
2 жыл бұрын
Bro that’s chassis is sick
@CrucialRC
2 жыл бұрын
Thanks Josh. It is the Taylor RC vekta chassis. Beautiful when cleaned up. LOL
@joshkiel9405
2 жыл бұрын
@@CrucialRC shit it’s beautiful when dirty I just picked me up a Baja gonna get into this looks fun as a mother brother
@CrucialRC
2 жыл бұрын
Bet. Can't wait to see it bro!
@gsrc6876
2 жыл бұрын
YOU ARE A PRO BRO 💯💯💯👌👌👌🤘🤘🤘🤟🤟🤟
@CrucialRC
2 жыл бұрын
Thank you Shy G!!
@CoachD386
2 жыл бұрын
Good video fam 👍🏾💯
@CrucialRC
2 жыл бұрын
Thanks 💯
@JOHND_RC
2 жыл бұрын
Nice 👍🏼
@CrucialRC
2 жыл бұрын
Thanks 👍
@vajim5585
2 жыл бұрын
💪🏿💪🏿💪🏿
@CrucialRC
2 жыл бұрын
You will need this nugget. LOL
@Javier75288
2 жыл бұрын
Crucial you don’t wash your whip before you start working on it?! Shame on you! Just Kidding man…great vid keep ‘‘em coming.
@CrucialRC
2 жыл бұрын
My bad bro. LOL. nah I was a little upset that it only got about 10 minutes of run time before the pin went bye bye. If it was real dirty I would definitely have washed it 1st tho.
@Victic005
Жыл бұрын
Where do you get parts for this vehicle? Looks like almost everything is out of stock on DDM.
@CrucialRC
Жыл бұрын
Unfortunately that's the story with RC right now. If not a baja everything is hard to find. I go to detroitperformancerc.com, ddm, and krakenrc to buy parts for it.
@evssv
2 жыл бұрын
how b mrC👍
@CrucialRC
2 жыл бұрын
Wsssup bro. How you been? You go see the queen?
@evssv
2 жыл бұрын
@@CrucialRC yeah man all good😜....naa ...cleaned me car 😎
Пікірлер: 45