I use No. 2, which I bought from Ultimate Finish some years ago to compliment my Kranzle 1151 T. Have used it plenty of times and twice in last 2 days, and it does the job perfectly. I used Ultimate Snow foam for the pre-wash. Actually the cars weren’t too dirty, more dusty, and so didn’t bother hand washing them. I then, whilst the cars were wet, sprayed them with Malcolm’s Devil Shadow (hydro-ceramic wax) to provide a protection. I then dried the cars with towels and I was very pleased with the result.
@Chris_mk7
Жыл бұрын
My favourite is Mjjc pro v2 so far!
@minimadmotorman
3 жыл бұрын
I use an MTM PF22 and a PF22 clone (with a wide filler neck) at the minute, previously had a No.1 type lance (Geniune PA one) and couldn't fault it. If choosing based on your tests here I like the No.2 adjustable Kranzle one.
@patrickvennard838
3 жыл бұрын
Number one definitely there are so many other good foam cannons out there. A t£49 you can get an MTM PF22. Thanks for the video always like your content.
@Pete.Ty1
3 жыл бұрын
Number 1 difficulty in obtaining replacement bottles, number 3 no dosage regulator, there's not a huge variation in the prices, guess I would choose number 2.😊👍
@D992
3 жыл бұрын
Kranzle all day long as all of your kit is then the same manufacturer. Kranzle know what they are doing.
@D992
3 жыл бұрын
Mal, I’ll be over in a few weeks to see you. My 1152 needs a good service and I need some extra goodies. 😁👍🏼
@DjNikGnashers
3 жыл бұрын
I use the #1 / 1st lance, it's a halfords brand, perfect for me. It was cheap, and it works as well as anything else I have ever used.
@KranzlePressureWashers
3 жыл бұрын
yeah its very popular
@raza061
3 жыл бұрын
Hi dear, I just got a kranzle 2160, it's used and many years old. I belong to Pakistan and you can't think of buying a new one as it can cost you 2000USD at the end which is beyond the reach of more 99% of population. I really got surprised that its still working. One thing I wanna ask that what's the daily recommended use of my machine
@jeffbilbrough6494
3 жыл бұрын
Hi syed, just seen this video & your posting. I used to make & sell industrial pressure washers. The Kranzle you have is a really good machine & will run for many hours every day, 10 - 12 without a problem. Parts for them if needed are readily available. Change the oil inside it regularly & use good quality oil. I have a smaller Kranzle myself which is over 20 years old. Hope this helps you. Regards, JeffB
@raza061
3 жыл бұрын
@@jeffbilbrough6494 thanks dear, I got three machines. Parts might be easily available in your part of the world but not here. People don't even know about pressure washers
@fensterputzernuernberg
3 жыл бұрын
The Cleanest car in the UK .. that one
@KranzlePressureWashers
3 жыл бұрын
🤣🤣🤣
@corruptionandriskadvisoryb2938
3 жыл бұрын
Very well presented
@cruxxxy
2 жыл бұрын
What would the range be on the pencil/fine setting for the last foam lance? It looks to be the most powerful/direct in the pencil setting so interested to know if I can use it to shoot foam/chemical to a second story building?
@Distorted-Vision
3 жыл бұрын
Just for clarification only no. 3 is a genuine Kranzle product?
@KranzlePressureWashers
3 жыл бұрын
Yes 3 is genuine Kranzle product No.2 was used in the UK as a kranzle product until they made their own No. Is a budget foam lance 👍
@Distorted-Vision
3 жыл бұрын
@@KranzlePressureWashers I bought a Profi 160 TST from you two weeks ago. Bought no. 3 snow lance few days later. Changed my mind after watching this video thinking I wanted no.2. Phoned to ask if I could exchange for no. 2 with 2L bottle but you were out of stock. Last night I changed my mind again and preferred a genuine Kranzle and the bottles are much better. So i just ordered a 2L Kranzle bottle from you. Functionally, variable spray pattern is more useful to me than variable concentration. But I think no. 2 looks the best, asthethically and Suttner are German manufactured too?
@MJJCvideo
3 жыл бұрын
Hi @Kranzle Pressure Washers, would you like to review the new MJJC foam cannon pro?
@KranzlePressureWashers
3 жыл бұрын
yeah sure where do we get them?
@MJJCvideo
3 жыл бұрын
@@KranzlePressureWashers Hello, I have sent an Email to you,please kindly check it out. Many thanks.
@waynegto1484
2 жыл бұрын
Kranzle make such a good pressure cleaning machine but the bottle from the snow foam applicator is rubbish....cheaply made easily broken and non replaceable - Disappointing
@thestudio4583
2 жыл бұрын
how can i get spar parts
@KranzlePressureWashers
2 жыл бұрын
Assuming you are I the UK 🇬🇧 contact us at Aquaspray
@thestudio4583
2 жыл бұрын
@@KranzlePressureWashers could you please provide the contact details Thanks
@KranzlePressureWashers
2 жыл бұрын
@@thestudio4583 aquaspray.co.uk
@johnmelling9950
3 жыл бұрын
PA are the original and best without a doubt.
@fationkalanxhi7793
2 жыл бұрын
What is ratio that this foam gun ?
@KranzlePressureWashers
2 жыл бұрын
The ratio of chemicals I used is 1:4 www.devilsshadow.co.uk/collections/snow-foam-pre-wash
@MumenRider78
3 жыл бұрын
What other choices are there for the D10 fitting?
@KranzlePressureWashers
3 жыл бұрын
All options are available on our website in D10
@MumenRider78
3 жыл бұрын
@@KranzlePressureWashers I've decided on number 3. Do you recommend a particular type of inlet hose for the Kranzle? Mine will need to be 10m long so that I can plug into to the mains rather an extension cable.
Hi Malcolm, I have sent you couple of emails regarding if you can ship to New Zealand but I have not had a reply back to either email. Can you please advise whether you can ship to New Zealand and VAT free if I place an order?
@KranzlePressureWashers
3 жыл бұрын
sorry we dont have a reliable carrier that can ship to New Zealand cost effectively
@alfin7058
3 жыл бұрын
👍🏼👍🏼👍🏼👍🏼👍🏼
@ameasureofpipps
10 ай бұрын
What chemicals do you recommend?
@corruptionandriskadvisoryb2938
3 жыл бұрын
Can I please have your email. I recently bought a t7/122 need advice on many things
Пікірлер: 39