Finally somebody who breaks it down ....thanks bro
@tamoorchughtai9267
4 жыл бұрын
No problem I'm going to release some how to soon but I'm waiting on parts.
@indiobaez3314
4 жыл бұрын
Nothing Budget Here, Nice Clean Build 💪💪💪💪💯🙏
@RiggsGarage
4 жыл бұрын
I bet you're glad you bought good parts to start with. I've gone cheap before and had lots of regrets
@tamoorchughtai9267
4 жыл бұрын
That true but remember I wasn't on a budget. I could have done it for a lot less by almost 7k
@noelopez8206
2 жыл бұрын
@@tamoorchughtai9267 all that put together cost you around 7k
@tamoorchughtai9267
2 жыл бұрын
@@noelopez8206 hell naw 😂 I spent on my build around 15k but if you do it the cheap way I got a video explaining more in depth on doing it cheaper.
@Bradon25
4 жыл бұрын
So much for budget build lol. K tuned everything! Damn that looks good!
@tamoorchughtai9267
4 жыл бұрын
Lol not really budget but I do talk about different option to go a cheaper route
@Bradon25
4 жыл бұрын
@@tamoorchughtai9267 i just bought a clean 92 cx eg with a b20v with lots of goodies, full suspension upgrades, traction bar, full interior, clean title..debating on turbo build, or k series build.
@tamoorchughtai9267
4 жыл бұрын
@@Bradon25 I would go k depending on if you have 7 grand to spend
@Bradon25
4 жыл бұрын
@@tamoorchughtai9267 i was thinking about sleeving the block, new rods, upgrading the fuel system and going turbo.
@tamoorchughtai9267
4 жыл бұрын
@@Bradon25 yes that's what most people do but I don't think you have to sleeve it
@ZakBendaga
2 жыл бұрын
Very clean build. I'm in the process of doing my first K swap so this was incredibly helpful. Thank you!!
@dochvtech22
2 жыл бұрын
This will help..,. Look up Gene kim n Chuck missler on KZitem
@jilwankavian8733
2 жыл бұрын
5:41 who else heard it???? Hahahaha
@RayLoveJr
4 жыл бұрын
Whoever said Honda’s are cheap lied lol my k24 swap cost more than 5k and I’m not even done lol still need a tune and I did it the budget way
@tamoorchughtai9267
4 жыл бұрын
Bro it's the little stuff that add up the cheapest way is to buy a rsx and drop the engine in from it. All u need is mounts axles a ecu
@tamoorchughtai9267
4 жыл бұрын
@Manuel Ramos true but its 100 bucks but you need everything thats on a rsx. Better go hondata
@MasksOfficial
4 жыл бұрын
K24s are the most expensive swapped. Hopefully that 5k went towards a hondata ECU, hasport driveshafts and the correct gearbox.
@tamoorchughtai9267
4 жыл бұрын
@@MasksOfficial the k20a2 and k20z1 or z3 cost 1200 to 1500 bucks the jdm k24 high compression which is same as k24a2 from tsx is 600 to 900.
@tamoorchughtai9267
4 жыл бұрын
@@MasksOfficial k20 head cost more k24 block cost more
@Shreddylife
5 ай бұрын
I thought about doing K swap in my 99 coupe but decided to toss some I beam rods and Vitara pistons in my D16 and boosted it lol It cost less than half the amount of a K swap for everything plus the tune.
@chitboxdeluxe3542
29 күн бұрын
Thank you so much for the parts breakdown and pricing. Really helps me with an idea on what to get!
@kswapvizzi1659
3 жыл бұрын
I see ur using the ekk2 mounts. are u still running ek subframe or running eg subframe?
@tamoorchughtai9267
3 жыл бұрын
No with ekk2 you need eg subfram its a bolt in using eg bolts
@tallglassofwhiskeysauce8552
2 жыл бұрын
Very good video with descriptive commentary.
@Socalhookerkrewfishing626
3 жыл бұрын
That’s not a budget build lol
@youneedhost
3 жыл бұрын
Ktune is getting rich with this parts 🤔
@tamoorchughtai9267
3 жыл бұрын
I bet I spent a lot
@kevinrodriguez3629
3 жыл бұрын
Just for a name
@ZT_Performance
3 жыл бұрын
Yea they are making a killing
@AM-wi6zo
3 жыл бұрын
@@kevinrodriguez3629 Name and quality parts
@ramellyc5076
3 жыл бұрын
why you put soo much into an old honda civic, and why you don't upgrade your interior ... it looks like wtf compared to the engine bay ...
@tamoorchughtai9267
3 жыл бұрын
LOL yea the best part is my engine bay and idk I love driving the car everyday it’s been 1 year since I’ve completed it and I don’t regret it
@gunnertomb6842
3 жыл бұрын
@@tamoorchughtai9267 LoL you should add "budget part of the build starts just after the 4 min mark" to the title. That's first time you said an amount that wasn't $1000 bucks or $500 bucks. Finally you $250 bucks and $50 bucks! Nice swap and great choices for parts! Thanks for the vid. I'm thinking of doing a k swap in my 2000 civic right now. But I need a budget budget swap.
@tamoorchughtai9267
3 жыл бұрын
@@gunnertomb6842 I have another video that can help
@miguelalvarado8414
2 жыл бұрын
was thinking about buying a 8th gen si trans on ebay can’t find anyone locally litteraly closest i’ve seen is 8 hours aeay
@tamoorchughtai9267
2 жыл бұрын
I have a rsx type s tranny if you want just with broken case
@h2bhatchie668
10 ай бұрын
How is it buying motors and transmissions off ebay
@redbrown5721
Жыл бұрын
U need that flywheel cover plate muh boi
@johnnyramirez9082
5 ай бұрын
Gorgeous build im on my way with mine
@rarewitit7899
2 жыл бұрын
Good job bro
@sirsendit9770
9 ай бұрын
Think 3,000$ be enough for a budget k swap?
@Jspechtchrare
2 жыл бұрын
Stock fuel rail doesn’t have a regulator
@tamoorchughtai9267
2 жыл бұрын
yes the small black thing in the middle is but you cant adjust
@Jspechtchrare
2 жыл бұрын
@@tamoorchughtai9267 the regulator is in the tank
@tamoorchughtai9267
2 жыл бұрын
@@Jspechtchrare oh i didnt know that i thought it was on fuel rail. thank you
@Jspechtchrare
2 жыл бұрын
@@tamoorchughtai9267 nice build bro
@tamoorchughtai9267
2 жыл бұрын
@@Jspechtchrare thank you
@donjuan4925
Жыл бұрын
Gracias for the video carnal 🍻
@wezznsb7376
7 күн бұрын
My ksap cost me around 14k ✌️
@justinsmith1860
3 жыл бұрын
Not a budget build by any means but nice build
@tamoorchughtai9267
3 жыл бұрын
True lol
@fairladyz9957
4 жыл бұрын
My friend got rear ended and selling me his whole rsx type s for 800 should I attempt the swap
@tamoorchughtai9267
4 жыл бұрын
Yes
@tamoorchughtai9267
4 жыл бұрын
For 800 bucks you will never get a better deal
@tamoorchughtai9267
4 жыл бұрын
K20a2 1000$ Transmission 1000$ Ecu 300$
@edwinaquino9291
3 жыл бұрын
Ill buy it
@esaiejoseph2105
3 жыл бұрын
Nice build,what wheel hub your using in the front
@chiefgwopp1004
2 жыл бұрын
*He Probably Sold The Car By Now Lol I Say A Good 6-7k With All These Ktuned Parts Lol*
@tamoorchughtai9267
2 жыл бұрын
I did lol last week
@chiefgwopp1004
2 жыл бұрын
@@tamoorchughtai9267 *Shit You Had It From What The Vid Shows For 2yrs Lol Thats Wassup Man* 🤙🏼
@goldentrucker7921
2 жыл бұрын
@@tamoorchughtai9267 what are you driving now?
@travthecooldad5489
3 жыл бұрын
Around 5-6K for a k swap is cheap. I sold a good bodied and bad interior B18c1 ek swap for $12k. With a k swap you can get like 20k plus
@james37474
3 жыл бұрын
Hell ya man super clean 👌
@chicoleno007
3 жыл бұрын
Did u use your ek front lower control arm and front lower compliance arms and compliance bracket
@tamoorchughtai9267
3 жыл бұрын
No I used a eg subframe, eg subframe bolts, eg manual steering rack, eg lower control arm, eg compliance bushing, and eg steering u joint.
@kianlugo
Жыл бұрын
@@tamoorchughtai9267 where can I buy the eg lower control and compliance arms
@GhostofCT0916
3 жыл бұрын
I’m currently doing the same build & what did you use regarding knuckles?
@tamoorchughtai9267
3 жыл бұрын
You can use your ek knuckles
@GhostofCT0916
3 жыл бұрын
@@tamoorchughtai9267 sweet thanks for the reply!
@mrtreejunkie
3 жыл бұрын
Did you say 1100 for the ecu Hondata? Wtf 😳
@tamoorchughtai9267
3 жыл бұрын
Yea kpro v4 cost that much
@carsinruin6102
3 жыл бұрын
That's standard for k tuned
@chicoleno007
3 жыл бұрын
Did u use eg subframe?
@tamoorchughtai9267
3 жыл бұрын
Yes
@justuskraay6946
3 жыл бұрын
I am thinking of goin kswap on my eg hatch cause I threw a rod in my gsr. Thx for this video letting me know it’s goin to be around 6k to do so.
@GofastD
2 жыл бұрын
Not even remotely true bro this dude paid out his ass for every single part lmao
Пікірлер: 89