"Quick-Lock Lynch Pins" are a direct replacement for the standard like you have and are commercially available (or from your Kubota dealer for a premium price). When running a 12-inch bucket, I just put a bolt with a nylock nut on it because any lynch pin you put on will just get striped right off.
@rollingoakfarms9132
2 жыл бұрын
For sure I'm already on it. I picked some up from my farmers co-op this morning matter of fact. Thanks for the info.
@casselhauling
2 жыл бұрын
Thats what I always did. The pins were fine for the wider buckets but I tried all kinds of pins but a bolt and lock nut was the best solution for the 12" bucket. Very nice looking machine!
@rollingoakfarms9132
2 жыл бұрын
Thank you we appreciate you watching.
@rextrammell7840
2 жыл бұрын
@@rollingoakfarms9132 👍🏼. Beat me to it, Gr8 fastener with a nylock nut. I’ve got the baby brother (KK033-4) & thinking of upgrading. Nice review, thanks.
@thomasstapleton3399
25 күн бұрын
Great commentary onKX
@rollingoakfarms9132
25 күн бұрын
Thank you
@Oddball_KellysHeroes
2 жыл бұрын
Thank you for telling us your height. I'm 6'4" and looking at this machine for forestry mulching. Enjoyed the video.
@rollingoakfarms9132
2 жыл бұрын
Anytime thank you for watching.
@FloppyChuck
2 жыл бұрын
I wanted to share that I found a usb charging port right behind my fuse box. Also a great place to charge your phone.
@rollingoakfarms9132
2 жыл бұрын
Oh heck I'm going to have to look at that for sure. Thanks for the tip.
@jarodhynson8604
2 жыл бұрын
We put Werk Brau thumbs, hydraulic disconnects, and buckets on all our Kubota Mini’s. Hands down the best decisions ever.
@rollingoakfarms9132
2 жыл бұрын
I will have to check them out
@Xstreamaudio
2 жыл бұрын
Got 55 hours on my kx057-5...love it. Radio is the only think next for mine
@rollingoakfarms9132
2 жыл бұрын
I have found if I put my phone int the cupholder or phone holder those pockets amplify the sound and I jam on the regular
@rollingoakfarms9132
2 жыл бұрын
It at least gets me by
@scottlurken9667
2 жыл бұрын
This one is on my list. I really would like to have a 080-4, but $$$ are driving me to consider the 57- . Tell us: have you found yourself wanting “a little more machine,” at any point? Thanks for posting, I learned a lot from listening to your point of view!!
@rollingoakfarms9132
2 жыл бұрын
You always will want more machine it's in our nature. The 057 has tremendous power but bigger is always better. The main reason for us is the 057 is far easier to transport with a 1 ton setup and trailer. Technically without going CDL between truck trailer and machine the 057 is pushing the limit. The 080 would have put me over weight. Also I went for the 057 over the 80 because of the -5 improvements. More than likely as soon as the 080 is offered in a -5 I will own one of those as well.
@mikehydroseed1282
2 жыл бұрын
@@rollingoakfarms9132 how are you towing this without a cdl-a? I’m waiting on getting my 057-5 until I get mine.
@rollingoakfarms9132
2 жыл бұрын
I'm just below the weight limit. We ended up going with a bumper pull equipment trailer to shave some of the weight off of a gooseneck. The trailer is derated as well. Also we are in a very rural area alot of farming. Now on our farm side we use j tags without CDL but can still drive rig within the state between fields and farms. Up to 80k lbs. Best I can remember. And it has to be for just the farm no going between jobsites.
@LC_music_studio
Жыл бұрын
Have a kubota l4740 tractor. Great machine and would love to have a mini. Only thing is they have a bad reputation for poor hoses and paint. Which they would clean that up.
@grainstogreatness4629
Жыл бұрын
So far, a year in we have really enjoyed the equipment. The paint and hoses have ended up being pretty robust, being we are not the easiest on equipment. the hydraulic thumb hoses have been very impressive so far. I haven't even noticed any paint fade yet.
@VHTim
2 жыл бұрын
Hi, I am going to pull the trigger on a 057-5. If you do not mind answering a few questions. Did you get a price less that list price? If so, how much? Are there any options that you now consider a waste of money? What options do you wish you had purchased? Thanks
@rollingoakfarms9132
2 жыл бұрын
If you go in as cash you can get a pretty good discount but if you're going to 0% interest rate is pretty much is what it is. I've enjoyed ours very thoroughly now one thing that I have on mine that I have not used yet is that second set of remote lines but it is far cheaper to go ahead and get them put on them to do it as an add-on later on the cab would be a must for me and if you can go ahead and get you a few different buckets I've been back to the dealer twice to get a one foot bucket and a 3-ft bucket. The thumb is an invaluable accessory. Really the only thing that I'm going to end up adding to my machine as of right now will be a stereo system that accept Bluetooth past that everything has been phenomenal I don't think I would change anything
@timberhitchllc
2 жыл бұрын
I have a u55-5 with the same "phone" holder under the display. I modified mine by reaching in with a long razor blade to cut off those ribs. It's not a wiggle-free fit but now holds my phone just fine.
@rollingoakfarms9132
2 жыл бұрын
Yeah those ribs grab ahold of an OtterBox like crazy. Thanks for the tip will me modifying mine just shortly. How are you liking the u55?
@timberhitchllc
2 жыл бұрын
@@rollingoakfarms9132 It's literally the best thing I've ever bought in my life. It has changed the way I do business and opened doors that were never an option before. The hard part is keeping up with all the attachments. These new machines are far more capable of supporting additional functions. The one thing I wish it came standard with (for the amount of money these things cost) would be a tilt rotator with pin grabber lugging, or at least a hydraulic coupler. The manual pin connection works but it's just a prop for the break-out force numbers in the brochure so the brands can one-up each other at every release.
@rollingoakfarms9132
2 жыл бұрын
Could not have said it better myself.
@rontopping2048
2 жыл бұрын
Actually kubota machines are shipped from factory without coupler , thumb, hydraulic lines. Dealer installed the lines on thumb.
@rollingoakfarms9132
2 жыл бұрын
Right, I have had multiple lines on the main boom loosen too though. Nothing a wrench didn't fix though.
@michaelmcguire1431
2 жыл бұрын
I have a KX040-4 and been thinking about upgrading to the 057-5. It is hard to tell in this video but it looks like the arms for the blade aren’t as heavy as the -4 series machines. Maybe it does and I just couldn’t tell in the video but mine has big heavy arms that connect the blade to the frame of the machine. They look like flat stock metal with braces.
@rollingoakfarms9132
2 жыл бұрын
They are I'd say inch and a quarter thick with brace webbing and re enforced very well . I don't think I could ever warp or damage them. I've used them alot this far leveling and pushing everything as I go. Y'all will be the first to know if something does happen though.but I very serious doubt they could be damaged the next new video coming up I am blading alot of heavy sandstone and boulders that dang near weight what the machine does. Thanks for watching anything you want to see Let me know.
@alittlebitofeverything5090
2 жыл бұрын
I have a 040-4 and I can see what you're saying. The main support braces are thin wow. The 040 has got to be 3-4" rectangle boxed. Weird but I suppose the engineers made the blade right for the KX057, but looks like toothpicks lol.
@gvman32
Жыл бұрын
Why did you purchase it? I have a Kubota tractor with several attachments and I'm very happy with it. Would love this as well but have trouble justifying both.
@rollingoakfarms9132
Жыл бұрын
Well we have quite a bit of land to clear up that the tractor can't handle. Now I can dig my own infrastructure and stump land. Also we do take it out on jobs/ help neighbors. And worst case scenario if we lose an animal I can bury it. I have found it is nice to have and we use it just as much as the tractor if not more.
@whakatu4life285
2 жыл бұрын
Does the Kubota come with a intermittent wiper yet? Nothing pisses me off more as an owner /operator when using one of our 2018 KX040-4 or 2019 KX057-4 in rain that's not heavy enough to have the wiper operating non stop but enough that you have to keep taking your hands from the joystick to start/stop the wiper or you get a dry blade screeching across the windscreen that wears the blade out and it just a very budget thing for a modern bit of machinery costing in excess of NZD $100k
@rollingoakfarms9132
2 жыл бұрын
Yes it does come with a two speed intermittent wiper now. The slow speed is decent for those mist rains that's just enough to piss you off, then the faster speed of course will handle most of a monsoon. I would like it more though if it was set up with a potentiometer on the joystick. The m5. Tractor has the same intermittent wiper on it as well. I do wish they would relocate the air filter intake however. Being behind your left foot is a horrible location and the inevitable reduced filter flow makes the defrost suck. Mine so far has turned into a weekly cleaning just because I'll open the door while the air or heat is on and catch weed seed, or dust bunnies for the few seconds the door is open not to mention the dirt dust.
@fuckyoutubecensorship-er7dv
Жыл бұрын
Best thing to do with those lynch pins is to put them in a drill press and drill a small hole towards the tip so you can safety wire them on so they don’t come off unless you want them too. Then you just keep a pair of dikes and a little wire in your storage box.
@MrBigokhunter
2 жыл бұрын
I have tried several styles of pins with my trenching bucket, lost all of them, finally went to 3/8 bolt when running that bucket. I have about the same complaints as you, but over all I really like the machine, the phone holder is the biggest, LOL. I just bought a nice window mount holder. We are running FAE mulching head and it fits well with the 57-5, really like the flow control. You mention having auger and post driver. I am building that in the shop in the next few week, did you find something out there that is a turnkey? I ordered another FAE mulching head and will be selling the other one. thank for sharing.
@rollingoakfarms9132
2 жыл бұрын
Same here picked up bolts at my co-op the other day with nylocks. The driver that I am studying about is the grab and drive gd30s looks to be slick. kzitem.info/news/bejne/t66ftap_johyp2U The auger I'm going to fan my own mount up I do believe. Easy enough to cut the tabs out for quick change. One of my winter projects for sure. I have been highly considering the mulching head. Sounds like they are pretty good .
@ryansmith1877
Жыл бұрын
Did you ever sell the AFE mulching head?
@angelocalabrese3463
4 ай бұрын
I put a 6ixer in the grease gun box, some coors banquets make the days go buy well
@mark_Hershey
2 жыл бұрын
Hey, thanks for vid. I have a 2020 kx040 and looking to upgrade to a -5 series to a u55 or 057. One of the few things i dislike with my machine is cabin filtration and cab air tightness. If you look at the bottom of floor in the cab around track controls you can see the ground below. Did kubota address this with the new cab? Also trying to find a pic of new cab cabin filter. The -4 models used a terrible filter. Basically lets dirt go right by into hvac system. Did they upgrade cabin filtration?
@rollingoakfarms9132
2 жыл бұрын
The cab is so tight I usually have to shut the door twice. As far as the filter I will have to get back to you on that one as I haven't had to replace mine yet. Alot of the times I'll have to crack my slide window to keep from having to slam the door that's how tight my cab is no joke.
@mark_Hershey
2 жыл бұрын
@@rollingoakfarms9132 thats is good to know. My rtv1100 has a tight cab, very hard to shut unless you crack a window. Thanks.
@rollingoakfarms9132
2 жыл бұрын
How do you like the rtv? We have been chewing on getting one.
@mark_Hershey
2 жыл бұрын
@@rollingoakfarms9132 Ive had it since 2012. The heat and ac is great. The cab is tight. Its great for having to check fences in cold weather after a storm. The bed is big and dump is strong. Downsides, it is not great off-road in mud, its heavy and slow. But thats not really what its built for. The cab is uncomfortable for long rides, its just the way the seats are. They addressed this with the new rtv1100x. For farm work its unbeatable, for recreation not so much. The newer ones are way more comfortable.
@rollingoakfarms9132
2 жыл бұрын
Thanks for the info and appreciate you watching.
@dcbrunk
2 жыл бұрын
each time you get out engine running, or shut off, what is the process for turning the hydraulics back on so you can use the thumb etc. On the skid steers the aux resets and so you have to push the button every time, i noticed you do not have an aux button so im wondering how to do it
@rollingoakfarms9132
2 жыл бұрын
Alot of the time it is low idling I have the auto idle turned on. Also anytime safety lever is pulled up it low idles. Now for the times I do shut it down. All hydraulics except for the thumb turn on with the red swing down switch. For the thumb to activate it, there is a button on the right hand joystick that turns it on and off. It is a tad annoying activating the aux. Hydraulics all the time as much as I'm in and out being I work alone alot. Thanks for watching.
@dangarcia8094
Жыл бұрын
How do you use the float feature on the front blade ? Does the feature just drop the weight of the front blade freely or how does it work ? Thanks brother
@rollingoakfarms9132
Жыл бұрын
On your blade control you push it all the way forward to the detent lock in. Once it's shoved forward it's a combination of the blades weight plus hydraulic resistance. I use the hound out of mine
@dangarcia8094
Жыл бұрын
@@rollingoakfarms9132 wow thanks I just tried it and it’s awesome, can’t believe I’ve owned it 3 years and never knew that’s how easy it is to use, works great man thanks again
@LostCaper
Жыл бұрын
The tracks seem to be longer so much more stable then the kx40
@rollingoakfarms9132
11 ай бұрын
The stability is fantastic will have a 500 hr review soon!
@rontopping2048
8 ай бұрын
Of course larger machine 13k lbs
@garyklavon5298
2 жыл бұрын
love mine also very strongmachine
@rollingoakfarms9132
2 жыл бұрын
We are taking ours out to job sites now off the farm. Definitely very impressed, thanks for watching.
@geraldmcclintock2567
2 жыл бұрын
@@rollingoakfarms9132 how’s the cab noise/cab quality, is the machine pretty quiet in the cab ?
@rollingoakfarms9132
2 жыл бұрын
Very quite machine overall, but the cab does make a significant difference. Fit and finish of the cab are great. The 2 different slides on the operators station are nice, you can set your seat slide depth, then set your controls and station to fit your arm reach and best comfort. Overall the cab is very spacious and everything so far has been great for me. I do wish the defrost had a little more rear end behind it like the tractor has, but it still works very well. I must say Kubota really thought alot out on this machine and even listened to the operators to take it to that next level up. Also on a side note thus far the glass has been very forgiving with pieces of trees and rocks/dirt hitting it fairly hard.
@rollingoakfarms9132
2 жыл бұрын
One last thing the cab did save me from hornets and yellow jackets already. That itself has justified the cab for me, not to mention being able to work pretty much any weather condition.
@geraldmcclintock2567
2 жыл бұрын
@@rollingoakfarms9132 nice 👍 thank you for the detail . We are considering that machine
@outdooralaska6945
2 жыл бұрын
Two questions- How often does it go into regen? Why are you resting the bucket on your sawmill?
@rollingoakfarms9132
2 жыл бұрын
Ok so my first Regen happened at 80 hours but has not hit again yet. I imagine it will be soon but you can continue running per usual while it regens. The bucket is actually resting on a log through the bunk, country anti theft device since they are very close to the road. It's currently setup outside my fence. We don't have much crime but I'd rather not take the chance of someone deciding it would look good at their house.
@outdooralaska6945
2 жыл бұрын
@@rollingoakfarms9132 Right on, that makes sense. Iam looking at buying a kx057-5 myself. Can you film some footage from outside the cab while running it?I want to see how stable it is while moving logs and dirt. Thanks
@rollingoakfarms9132
2 жыл бұрын
For sure that's already in the works, also before you see the video it is very stable and amazing what this machine can do. I wish someone had videos up before I purchased mine, was a big leap of faith for me, I think we got one of the first cab versions to hit Tennessee. Keep an eye out on the next few videos to come I'll fix you up. Also I have been on some very steep slopes where all I could see was blue sky and it performed way beyond my expectations.
@rollingoakfarms9132
2 жыл бұрын
just a heads up as well alot of the camera movement from inside the cab is my Gopro mount on the window, causes a lot of shaking.
@outdooralaska6945
2 жыл бұрын
@@rollingoakfarms9132 sounds good. I been waiting for people to post videos on these machines since they came out. I had money down on one then pulled it since I found out the derated lifting capacity from the -4. So far everything I've seen everyone loves the new ones. Iam tall so I want that big cab.
@Hittman67
2 жыл бұрын
Could you please show me how this machine does grading? Thank you
@rollingoakfarms9132
2 жыл бұрын
Do you want to see the machine in action or an after video? I just finished a large fanned bank down my farm Rd came out very well. We have had several inches of rain the last few days so it will be a day or 2 before I can do a video of it in action.
@Hittman67
2 жыл бұрын
@@rollingoakfarms9132 well I'm new to the game. My son who's been excavating for 15 years told me to get a kx-040-4 with a six in 1 blade for doing driveways and roads. But I want a little bigger machine. So I really want to see how hard it is to grade a road with only an angle blade and still manage to get a crown in the road.
@rollingoakfarms9132
2 жыл бұрын
I'll get you a video out just as soon as the ground is dry enough to work up. I've had good look with my machine. Doing driveways and land clearing I definitely wouldn't go smaller that the 057 but that's just me. I'm ready for the 080-5 to come out.
@Hittman67
2 жыл бұрын
@@rollingoakfarms9132 let me buy your 57. Haha
@Hittman67
2 жыл бұрын
@@rollingoakfarms9132 and Thank you for your videos and quick replies. I'll look forward to any help or vidz you can send. Thx again. Eric
@stephentoth6108
2 жыл бұрын
I hired a 3.8t kubota for a retaining wall job I need to do in my opinion the cab was way too small if I looked to the left the machine would turn and the hydraulic power was very weak compared to other brands I have used (yanmar, cat and kobelco) .
@rollingoakfarms9132
2 жыл бұрын
The 057 is the smallest in this lineup we have ran so far from Kubota
@hhazelhoff1363
2 жыл бұрын
If you don’t like this unit go buy yourself a shovel. They are super reliable. And proven through out history. Cheers
@rollingoakfarms9132
2 жыл бұрын
Very true, shovel is just not as productive as we need it.
@arturobayangos1223
2 жыл бұрын
bottomline : japanese made is better if not perfect
@rollingoakfarms9132
2 жыл бұрын
We are sure going to put it to the test. We will show the good and the bad. Thus far we are very happy with the equipment. Thanks for watching.
@Cabin138
2 жыл бұрын
What clear grease are you running? I to have the black grease in and it does look bad…..
@rollingoakfarms9132
2 жыл бұрын
I am using the Shell Rotella ET it's a opaque color and keeps your machine looking good. Just a heads up I am still working on getting that black junk out. I'm giving 40 dollars a case or so at rural king or tractor supply.
@rollingoakfarms9132
2 жыл бұрын
Thanks for watching
@rontopping2048
2 жыл бұрын
Nice machine but takeuchi is still the leader in control, smooth controls
@rollingoakfarms9132
2 жыл бұрын
I've ran several of the new takeuchi matter fact the 18k pounder was the first on our farm where the house is at. Cleared a little over an acre with it the door flew open because they had not adjusted the latch brand new still had the plastic on the seat. Just the door cost 4k. Found that out as I was spinning around and the door wrapped around a small white oak tree. I ran it probably 40 hrs or so. I'll see if I can dig that old video up and put it on here I think it was a tb 285 or 295 can't remember off the top of my head but that's ringing a bell. Before this Kubota my favorite was a Volvo but they are proud of those parts as well.
@jamesharpur720
11 ай бұрын
Accent makes you seem simple
@rollingoakfarms9132
11 ай бұрын
Welcome to the mountains of Tennessee!
@RickRossTN
5 ай бұрын
Simple like a fox! Spend a little time in the South, and you'll quickly learn that having an accent or speaking more slowly than a New Yorker doesn't indicate that a man is simple or stupid. Usually exactly the opposite.
Пікірлер: 94