If your scooter is padlocked, but you do not enter the menu page when you turn it on. --solution Press and hold the [light], [model] and [set] buttons at the same time to access the menu. Then you can refer to the video to operate.
Video Step-by-Step Translation
The [light] button is to decrease the value;
the [set] button is to increase the value. (for example: If you accidentally switch to 6700, you can click the [set] button to adjust the value to 6800.)
Press and hold the power button to turn on the scooter.
Step 1. Click the [light] button on the display to switch the value to 6000.
Then click the [model] button, adjust the hundreds digit, wait for the 0 in the hundreds digit of 6'0'00 to flash, and then click the [light] button to adjust the value to 6800.
Step 2. Then click the [model] button, adjust the tens digit, wait for the 0 in the hundreds digit of 68'0'0 to flash, and then click the [light] button to adjust the value to 6860.
Step 3. Then click the [model] button, adjust the tens digit, wait for the 0 in the ones digit of 686'0' to flash, and then click the [light] button to adjust the value to 6867.
Finally, press and hold the brake handle and press and hold the [model] button at the same time to unlock.
-----PL-----
Przycisk [światło] służy do zmniejszania wartości;
przycisk [set] służy do zwiększania wartości. (na przykład: jeśli przypadkowo przełączysz na 6700, możesz kliknąć przycisk [ustaw], aby dostosować wartość do 6800.)
Naciśnij i przytrzymaj przycisk zasilania, aby włączyć hulajnogę.
Krok 1. Kliknij przycisk [światło] na wyświetlaczu, aby przełączyć wartość na 6000.
Następnie kliknij przycisk [model], ustaw cyfrę setek, poczekaj, aż 0 w cyfrze setek liczby 6'0'00 zacznie migać, a następnie kliknij przycisk [światło], aby ustawić wartość na 6800.
Krok 2. Następnie kliknij przycisk [model], ustaw cyfrę dziesiątek, poczekaj, aż zacznie migać cyfra 0 w liczbie setek 68'0'0, a następnie kliknij przycisk [światło], aby ustawić wartość na 6860.
Krok 3. Następnie kliknij przycisk [model], ustaw cyfrę dziesiątek, poczekaj, aż zacznie migać cyfra 0 w cyfrze jedności 686'0', a następnie kliknij przycisk [światło], aby ustawić wartość na 6867.
Na koniec naciśnij i przytrzymaj uchwyt hamulca oraz naciśnij i przytrzymaj jednocześnie przycisk [model], aby odblokować.
-----FR----
Le bouton [light] sert à diminuer la valeur ;
le bouton [set] sert à augmenter la valeur. (par exemple : si vous passez accidentellement à 6 700, vous pouvez cliquer sur le bouton [set] pour ajuster la valeur à 6 800.)
Appuyez et maintenez enfoncé le bouton d'alimentation pour allumer le scooter.
Étape 1. Cliquez sur le bouton [lumière] sur l'écran pour passer la valeur à 6000.
Cliquez ensuite sur le bouton [modèle], ajustez le chiffre des centaines, attendez que le 0 dans le chiffre des centaines de 6'0'00 clignote, puis cliquez sur le bouton [lumière] pour ajuster la valeur à 6800.
Étape 2. Cliquez ensuite sur le bouton [modèle], ajustez le chiffre des dizaines, attendez que le 0 dans le chiffre des centaines de 68'0'0 clignote, puis cliquez sur le bouton [lumière] pour ajuster la valeur à 6860.
Étape 3. Cliquez ensuite sur le bouton [modèle], ajustez le chiffre des dizaines, attendez que le 0 dans le chiffre des unités de 686'0' clignote, puis cliquez sur le bouton [lumière] pour ajuster la valeur à 6867.
Enfin, appuyez et maintenez la poignée de frein et maintenez enfoncé le bouton [modèle] en même temps pour déverrouiller.
----DE--
Mit der Taste [Licht] lässt sich der Wert verringern;
mit der Taste [Festlegen] lässt sich der Wert erhöhen. (Beispiel: Wenn Sie versehentlich auf 6700 umschalten, können Sie mit der Taste [Festlegen] den Wert auf 6800 ändern.)
Halten Sie die Einschalttaste gedrückt, um den Roller einzuschalten.
Schritt 1. Klicken Sie auf die Schaltfläche [Licht] auf dem Display, um den Wert auf 6000 umzustellen.
Klicken Sie dann auf die Schaltfläche [Modell], passen Sie die Hunderterstelle an, warten Sie, bis die 0 in der Hunderterstelle von 6'0'00 blinkt, und klicken Sie dann auf die Schaltfläche [Licht], um den Wert auf 6800 einzustellen.
Schritt 2. Klicken Sie dann auf die Schaltfläche [Modell], passen Sie die Zehnerstelle an, warten Sie, bis die 0 in der Hunderterstelle von 68'0'0 blinkt, und klicken Sie dann auf die Schaltfläche [Licht], um den Wert auf 6860 einzustellen.
Schritt 3. Klicken Sie dann auf die Schaltfläche [Modell], passen Sie die Zehnerstelle an, warten Sie, bis die 0 in der Einerstelle von 686'0' blinkt, und klicken Sie dann auf die Schaltfläche [Licht], um den Wert auf 6867 einzustellen.
Halten Sie abschließend den Bremsgriff gedrückt und halten Sie gleichzeitig die Taste [Modell] gedrückt, um die Sperre aufzuheben.
Негізгі бет KuKirin G2 | Unlock Tutorial
Пікірлер: 42